• Journal of Chest Surgery
• /
• v.30 no.2
• /
• pp.125-130
• /
• 1997

Separating the patient from hypothermic cardiopulmonary bypass(CPB) before achieving adequate rewarming often results in afterdrop, which can predispose to electrolyte disturbances, arrhythmia, hemodynamic alterations, and shivering-induced increase of oxygen consumption. In an attempt to find an adequate end point temperature of rewarming after hypothermic CPB, 50 pediatric cardiac surgical patients were r ndomly assigned for end point temperature of rewarming of 35.5$^{\circ}C$ (Group 1) or 37t (Group 2), rectal temperature. Thereafter the rectal temperature was measured half, one, four, eight, and 16 hour after arrival to the intensive care unit(ICU), with heart rate and blood pressure. Additionally the rectal temperature was compared with esophageal temperature during CPB, and axillary temperature luring stay in the ICU. Nonpulsatile perfusion with a roller pump was used in all patients and a membrane or bubble oxygenator was used for oxygenation. Both groups were comparable with respect to age, sex, body surface area, total bypass time, and rewarming time. There was no afterdrop in both groups, and there were no statistical differences in the rectal temperatures between two groups. There were also no statistical dilyerences with respect to the heart rate and blood pressure between two groups. At the end of rewarming the esophageal temperature was higher than the rectal temperature. The axil ary temperature measured in ICU was always lower than the rectal temperature. No shivering was noted in all patients. In conclusion, with restoration of rectal temperature above 35.5$^{\circ}C$ at the end of CPB in pediatric patients, we did not observe an afterdrop.

• Ocean and Polar Research
• /
• v.28 no.4
• /
• pp.407-413
• /
• 2006

The effect of water temperature and photoperiod on the oxygen consumption of the fasted juvenile parrot fish, Oplegnathus fasciatus was investigated to provide empirical data for the early-stage culture management and bioenergetic growth model of the species. The mean body weight of the juvenile used for the experiment was $21.5{\pm}1.9g$, and the oxygen consumption rate was measured under four water temperatures (10, 15, 20 and $25^{\circ}C$) and three photoperiods (24L:0D, 12L:12D and OL:24D) with an interval of 5 minutes for 24 hours using a continuous flow-through respirometer. In each treatment three replicates were set up and 15 juveniles were totally involved. The oxygen consumption rates increased with increasing water temperature under all photoperiod treatments (P<0.001). Mean oxygen consumption rates at 10, 15, 20 and $25^{\circ}C$ ranged $202.1{\sim}403.4,\;306.7{\sim}502.2,\;536.7{\sim}791.0\;and\;879.9{\sim}1,077.4mg\;O_2\;kg^{-1}h^{-1}$, respectively. $Q_{10}$ values ranged $1.58{\sim}2.30$ between 10 and $15^{\circ}C,\;2.44{\sim}3.06$ between 15 and $20^{\circ}C\;and\;1.86{\sim}2.6y9$ between 20 and $25^{\circ}C$, respectively. Mean oxygen consumption rates of O. fasciatus were the highest in continuous light (24L:0D) followed by 12L:12D and 0L:24D (P<0.001). The oxygen consumption of fish exposed to the 12L:12D photoperiod was significantly higher during the light phase than during the dark phase under all temperature treatments (P<0.001). In summary, oxygen consumption rates of the juvenile parrot fish increase with increasing water temperature and lengthening daylight period; and, thereby, changes in water quality resulted from the depletion of oxygen under high temperature and long daylight photoperiod conditions should be monitored.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.202-206
• /
• 2016

Oyster mushrooms are widely cultivated and consumed in Korea. P. ostreatus 'Suhan(ASI 2504)' is an ideal cultivar for mushroom farmers due to its dark pileus and thick stipe; however, as it is very sensitive to environmental conditions, an alternative cultivar is required. To develop a new cultivar, parental strains 'Suhan(ASI 2504)' and 'ASI 0665 (Heuktari)' were selected from various collected strains according to morphological characteristics. P. ostreatus 'Soltari' was developed by DiMon crossing between the dikaryotic strain 'Suhan' and the monokaryotic strain derived from 'Heuktari'. Thirty-eight of the 100 crossed strains were selected following analysis of mitochondrial genetic characteristics, and 'Soltari' was ultimately selected by continuous cultivation tests. The mitochondrial DNA profile of 'Soltari' was found to be the same as that of 'Heuktari, and a nuclear DNA profile of 'Soltari' was similar as those of the parental strains, 'Suhan' and 'Heuktari.' 'Soltari' mycelium grows adequately in moderate to high temperatures of $12-20^{\circ}C$, although its optimum temperature was found to be $30^{\circ}C$. Fruiting body production per 1.1-L cultivation bottle was approximately 158.8 g. Its stipe length and thickness were comparable to those of diameter and thickness were somewhat lower (42.72 vs. 51.33 mm and 18.18 vs. 22.46 mm, respectively). 'Soltari' was found to be more resistant to high $CO_2$ atmosphere than 'Suhan', and the color of the pileus of 'Soltari' was dark gray at high temperature. Therefore, it is suggested that this new cultivar 'Soltari' is a good alternative cultivar and will contribute to energy saving in oyster mushroom farms.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.6
• /
• pp.814-819
• /
• 2004

An investigation was carried out to study the effect of two housing systems on feed intake and nutrient utilization of sheep in a semi-arid region of India. Two types of housing managements were adopted. The first was a shed- 20'${\times}$10' structure with all the four sides of 6' chain link fencing with central height of 10'. The roof was covered with asbestos sheets, with mud floorings. The second was an open corral- 20'${\times}$10' open space with all the four sides covered with 6' chain link fencing. Thirty-four (32 ewes and 2 rams) sheep were grazed together on a 35 ha plot of native range. All the sheep were grazed as a flock from 08:00 to 17:00 h during the yearlong study. The flock was divided into two groups (16 ewes+1 ram) in the evening and housed according to two housing systems (Shed and Open Corral). Three digestion trials were conducted during three defined seasons of monsoon, winter and summer seasons to determine the effect of housing on nutrient intake and utilization. Blood samples were collected in three seasons for the estimation of hemoglobin and glucose. Dry and wet bulb temperatures were recorded at 06:00 A.M. and 09:00 P.M. using suitable thermometers both inside the shed and in the open corral and temperature humidity index (THI) was calculated. There was significant (p<0.05) difference in the THI between shed and open corral in all the seasons, indicating that the shed was always warmer compared to open corral. The daily dry matter intake (DMI, g/d) was 965, 615 and 982 in sheep housed under shed and 971, 625 and 1,001 in those housed in open corral during monsoon, winter and summer season, respectively. These differences were however non-significant (p>0.05). The digestibility of DM was 45.92, 45.13 and 50.30 in sheep housed under shed and 43.64, 45.02 and 55.02 in sheep housed in open corral during monsoon, winter and summer seasons, respectively. There was no significant (p>0.05) difference in the digestibility of nutrients in sheep maintained under shed and in open corral. Blood Hb concentration was 13.97, 14.13 and 13.15 in sheep housed under shed and 15.27, 13.63 and 14.82 in those kept in open corral, whereas blood glucose concentration was 59.67, 59.70 and 52.33 in sheep under shed and 61.00, 61.00 and 57.83 in open corral, during monsoon, winter and summer, respectively. There was also no significant effect of housing on the body weight changes, wool yield and survivability in ewes. Although housing had no significant effect on nutrient intake, their utilization and blood parameters, there was significant effect on the physiological responses and energy expenditure of sheep maintained under the two housing systems (Bhatta et al., 2004). It can be concluded from this study that the housing systems didn't have any significant effect on the nutrient intake and utilization of native breed like Malpura, which were well adapted to the hot semi-arid conditions of India. However, while deciding provisions for housing of different breeds of sheep (both crossbred and native) parameters like physiological responses, energy expenditure, health conditions and overall economics of the systems should be taken into consideration.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.11-19
• /
• 2009

This study was performed to investigate the seasonal occurrence, developmental characteristics of each nymphal stages with different temperatures (20, 25, $30^{\circ}C$), longevity and fecundity of ussur brown katydid, Paratlanticus ussuriensis, damaging by outbreaks in the orchard areas of Bitan-ri, Yeongdong, Chungbuk. Paratlanticus ussuriensis occurred from late-March to late-August with peak of mid-May. Newly emerged nymphs appeared from March and do damaged fruit orchards with peak of mid-May when P. ussuriensis existed as 4th and 5th nymphal stages. P. ussuriensis adult occurred from early-June to mid-Aug. with peak of mid-July. Total density of P. ussuriensis was showed highest in mid-May. Paratlanticus ussuriensis goes through nymphal stages to 7th nymph, the ovipositor began exposed to outside from the 4th instar and the body weight increased heavily from this stage and the wings were observed from 6th instar. Developmental period was longer as increased the nymphal stages. Sex ratio of collected insect was showed as 0.57; females more than males. As increased the temperature, developmental period was to be short. Preoviposition was also to be short as 5.0, 4.3, and 3.4 days at 20, 25, $30^{\circ}C$, respectively, and fecundity increased as 69.0, 87.1, and 104.3 at 20, 25, $30^{\circ}C$, respectively. Longevity of male and female at $25^{\circ}C$ was showed the longest with 35.7, and 32.9 days and showed the shortest with 30.1 and 28.1 days at $30^{\circ}C$, respectively. The difference of developmental period in male and female were showed longer in female without relation of temperature. The eggs laid were frequently distributed 3 to 4 cm from soil surface, and showed the behavior laying eggs intensively when early oviposition period.

• Journal of Aquaculture
• /
• v.4 no.1
• /
• pp.31-66
• /
• 1991

This paper deals with the reproductive ecology e.g., number of the pre-spawning moults, morphological characteristics of the pre-spawning moult the common moult, daily ration druing a molting cycle mating behavior, structures of spermatozoa and spermatophore, structure of vas deferens, mechanisms of the oviposition and brooding into the egg-chambers, a suitable time for the artificial mating and fertilization, time sequence of the oviposition and brooding into egg-chambers from the copulation, responses to temperature and chlorinity on the egg development and hatching, effect of temperatures on duration of egg development, physical mechanism of the egg hatching, to make an attempt for the artificial spawning and brooding to establish a suitable system of the artificial seedling-production for the aquaculture. 1. Females molted commonly $8{\~}10$ times at an interval of $17{\~}18$ days at $28^{\circ}C,\;3.26\~4.35\%_{\circ}$ while the prespawning moltings were $4{\~}5$ times at an interval of $13{\~}14$ days. The suitable state for artificial copulation was within 14 hours elapsed from the prespawning moltings (most suitable state was within 8 hours). Males discharged a gelatinous spermatophore and placed it on the females sternum during copulation. Oviposition was seen $6{\~}17$ hours after copulation. External fertilization was considered to take place at oviposition. Fertilized eggs held in egg-chambers forming between pleopods were about $5000{\~}6000$ in females those sizes about 6.5 cm in body length. 2. Eggs immediately after oviposition were elliptic shape, measuring $0.58{\times}0.48$ mm up to hatching. Their sizes increased with egg development and finally reached $0.85{\times}0.54$ mm up to hatching. The relationship between the long axis of the egg(Y in U) and days elapsed(X) was expressed as Y= 5.60194 + 0.007358X. The eggs performed superficial cleavage and their cleavage furrows became visible at the 4-daughter-nucleus stage. The eggs showed normal development up to hatching at water temperature range of $22{\~}30^{\circ}C$ (optimum temperature : $26{\~}28^{\circ}C$) and at chlorinity range of $0.00\~6.64\%_{\circ}$ (optimun chlorinity : $2.21{\%}_{\circ}$). The relationship between incubation period (Y in days) and water temperature(X in $^{\circ}C$) could be expressed as Y= 50.803-1.3555X. The eggs hatched $12{\~}13$ days after oviposition at $28.0{\~}28.6^{\circ}C$ 3. The pre-spawning moltings were appreciably different in the morphologic structure from those of common moltings. Breeding setae and dresses were formed on the thoracic regions, abdominal epimerae and the bases of the first to fourth pleopods in order to prepare and support oviposition, transfering and supporting eggs in egg-chambers up to hatching. These supplementary breeding organs were observed only at reproductive seasons.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.1
• /
• pp.16-31
• /
• 2003

The granites in the southern Gimcheon area can be divided into two parts, marginal hornblende biotite granodiorite (Mgd) and central biotite granodiorite to granite (Cgd). Mgd and Cgd are gray in color and display gradational contact relations and are mainly composed of coarse-grained and medium-grained rocks, respectively. Mgd has more frequent and larger mafic enclaves than Cgd, and the two granites partly show parallel foliation at thire contact with gneisses. From representative samples of the granites, K-Ar biotite ages of 197∼207 Ma were obtained. Considering the blocking temperature of biotite, it is suggested that the emplacement age of the granitic magma was probably late Triassic. The anorthite contents of plagioclases in Mgd display less variation than those of Cgd, indicating that Mgd crystallized within a narrow range of temperatures. In the Al$\_$total/-Mg diagram, the biotites from the granites plot within the subalkaline field, and the smooth slope indicates differentiation from a single magma. All amphiboles from the granites belong to magnesio-hornblende. The linear trends of major oxides, AFM and Ba-Sr-Rb indicate that Mgd and Cgd were fractionally differentiated from a single granitic magma body crystallizing from the margin inwards. The relations of modal (Qz+Af) vs. Op, K$_2$O vs. Na$_2$O, Fe$_2$ $O_3$ vs. FeO, Fe$\^$+3/(Fe$\^$+3/+Fe$\^$+2/) and K/Rb vs. Rb/Sr show that they belong to I-type and magnetite-series granitic rocks developed by the progressive melting products of fixed sources. REE data, normalized to chondrite value, have trends of enriched LREE and depleted HREE together with weakly negative Eu anomalies.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.628-635
• /
• 2014

The large amount of $CO_2$ emitted from mushrooms during incubation and developmental stages can be utilized in plant production systems as a $CO_2$ source. The objectives of this study were to measure the $CO_2$ emission and absorption rates of mushroom and lettuce, respectively, and to analyze the $CO_2$ concentrations at various ratios of mushroom and lettuce in a closed production system. The $CO_2$ emission rate of king oyster mushrooms (Pleurotus eryngii ( DC.) Qu$\acute{e}$l) and $CO_2$ absorption rate of lettuces (Lactuca sativa L. cv. Asia Heuk Romaine) were measured by using two closed acryl chambers ($1.0m{\times}0.8m{\times}0.5m$) in which indoor temperatures were maintained at $18^{\circ}C$ and $22^{\circ}C$, respectively. The lettuce was grown at a light intensity of PPF $340mol{\cdot}m^{-2}{\cdot}s^{-1}$ and with nutrient solution at EC $1.2dS{\cdot}m^{-1}$. The air was periodically circulated between the two chambers using a diaphragm pump. The $CO_2$ emission rate of the mushroom increased until the $15^{th}$ day after scratching (DAS) and then decreased. The rate also increased with increased indoor temperature. In particular, the $CO_2$ emission rate per fresh weight of fruit body increased by about 3.1 times after thinning compared to before thinning. In terms of $CO_2$ balance, the $CO_2$ emission rates from a bottle (950 mL) of the mushroom at 9, 12, and 14 DAS were equivalent to those of 3, 4.5, and 5.5 lettuce plants at 7, 10, and 12 DAT (days after transplanting), respectively. This work shows that balance in $CO_2$ concentration could be achieved using an appropriate ratio of the two crops in a closed production system.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Acupuncture Research
• /
• v.18 no.6
• /
• pp.171-187
• /
• 2001

Objective : Moxibustion has been proved efficacious for many diseases, but isn't widespread in the clinics due to a danger of skin burning, the smoke produced while burning a moxa combustion and so on. Therefore, another type of moxa that can be resolved these troubles is required. To improve the effect of moxibustion and develop the new thermal stimulating treatment, the performance of commercial moxibustion widely used are studied systematically and found out quantitatively. Methods : We have selected two types (small-size moxa A(sMA), small-size moxa B (sMB)) among small-size moxaes used widely in the clinic. We examined combustion time, various temperatures, temperature gradient in each period during a combustion of moxa. Results : 1. The combustion time in the preheating period appeared somewhat longer in sMA than in sMB. 2, The combustion time in the heating period appeared longer in sMA by 26% than in sMB. 3. The average temperature in the heating period was $37.6{\sim}37.8^{\circ}C\;in\;sMA\;and\;36.2{\sim}36.8^{\circ}C$ in sMB and the maximum temperature measured at a center of contact surface in sMA was $48.6^{\circ}C$, higher by over $2.8^{\circ}C$ than that of sMB moxibustion. 4. The average ascending temperature gradient in the heating period was $0.08{\sim}0.1^{\circ}C/sec$ in both moxaes, and the average ascending temperature gradient of heating period in sMB appeared larger. The maximum ascending temperature gradient appeared higher in sMB, and the time reaching maximum ascending temperature gradient appeared much earlier in sMA than in sMB. 5. The combustion time in the retaining period was around 100 sec in sMA and around 275 sec in sMB. 6. The average temperature in the retaining period was $42.2{\sim}46.0^{\circ}C\;in\;sMA\;and\;39.3{\sim}41.4^{\circ}C/sec$ in sMB. The minimum temperature in the retaining period was over $38.80^{\circ}C$ in sMA but just $34.7^{\circ}C$ in sMB. 7. The average descending temperature gradient in sMA was $-0.050{\sim}0.067^{\circ}C/sec$ and in sMB was $-0.030{\sim}0.037^{\circ}C/sec$ 8. The combustion time in the cooling period appeared longer over two times in sMA than in sMB, and the time which the cooling period (minimum temperature) finished at appeared later in sMB by 55 sec. 9. We classified the combustion process that the measured temperature rose over body heat($37^{\circ}C$) into the effective combustion period. The effective combustion time was 233.3 sec in sMA and 300.4 sec in sMB respectively, and was longer by about 29% in sMB. The average temperature and maximum temperature in the effective combustion time appeared higher in sMA. The time taken until the maximum temperature was reached was 225.1 sec in sMA and 244.5 sec in sMB, faster by about 20 sec in sMA. The maximum ascending temperature gradient during the effective combustion period appeared larger about 1.4 times in sMB, but the time when the maximum ascending temperature gradient happened was faster in sMA. Conclusion : It appears that sMB, compared with sMA, is proper if necessary to apply the long time and weak stimulus, because of the gentle stimulus during the relatively longer time. In contrast, sMA that the symmetrical combustion happened is proper if necessary to apply the short time and strong stimulus.