• The Research Journal of the Costume Culture
• /
• v.26 no.1
• /
• pp.30-44
• /
• 2018

The study purpose was to investigate the jacket-fit satisfaction level of men in their 20s and 30s, using body-scanning data and a questionnaire. Thirty-five men were scanned using a 3D body scanner. The participants were divided into three groups (Small, Medium, and Large) based on their chest-circumference measurement. Their levels of satisfaction with the fit of their tailored jacket were compared by group. Chest, waist, and hip circumferences increased substantially as group size increased. The M-group was mostly satisfied with all body-site views. The S-group was especially dissatisfied with height, back width, waist circumference, and upper-arm circumference. The L-group was especially dissatisfied with waist circumference and hip circumference. The majority of the participants preferred the jacket closely fitted to their body. More than half of the participants thought finding a jacket of suitable size was difficult. When purchasing ready-to-wear jackets, the S-group and the M-group considered shoulder width important, while the L-group considered chest circumference the most important area. When evaluating the fit of ready-to-wear jackets, the L-group evaluated chest circumference, back width, and waist circumference as poor fits. The M-group evaluated sleeve length and shoulder width as poor fits, and the S-group agreed with respect to sleeve length. Body-satisfaction levels and matching jacket-satisfaction levels differed by body-size group, as did areas that need improvement. The conclusion is that size-group analysis using 3D body scanning can be utilized effectively for jacket-fit analysis. The findings of the current study can be applied to improving jacket fit among young male consumers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5113-5119
• /
• 2010

Anthropometry has been broadly explored in various fields including automobile industry, home electronic appliances, medical appliances and sports goods with aiming at reaching satisfaction to consumer's need and efficiency. However, current technologies to measure a human body still have barriers in which the methods mostly seem to be contingent on expensive devices such as scanner and digital measuring instruments and to be directly touchable to the body when obtaining body size.. Therefore, in this paper, we present a general method to automatically extract size of body from a real body image acquired from a camera and to utilize it into recommend systems including clothing and bicycle fitting. At first, Haar-like features and AdaBoost algorithm are employed to detect body position. Then features of body can be recognized using AAM. Finally clothing and bicycle recommending modules have been implemented and experimented to validate the proposed method.

• Journal of Fashion Business
• /
• v.24 no.1
• /
• pp.29-42
• /
• 2020

The purpose of this study is to analyze the body size and body characteristics of short-statured females in their 20s and 30s using direct measurement data from the 7th size Korea, and to analyze the differences in body dimensions and proportions between the regular and tall groups of short groups. The goal is to identify the dimension areas that need attention when designing and grading patterns for this short groups. As a result, it was found that the short group was shorter in height than the regular group, and the circumferential dimension was similar to the regular group. When designing patterns the tops, the grading of the Bust point-bust point is not necessary for the height, and it is not necessary to grade the Neck point to breast point in the short and regular group. These groups showed a difference in the front silhouette but not in the side silhouette. Based on these findings, the body types were classified into the following three types: 'most bulky and heavy', 'long lower body and small shoulder', and 'small and thin'. The type 1 population was the least distributed, and the relatively small and slim type was the most common. It is expected that the results of this study can be used as a reference when setting pattern designs, grading values, and production ratios by size for short women.

• Journal of Fashion Business
• /
• v.25 no.4
• /
• pp.36-60
• /
• 2021

This study aimed to provide basic data for establishing a sizing system for menswear by investigating body size changes and body shapes in adult men in their 30s to 50s. Data on 52 different upper body categories collected from 4,314 people during the 5-7th Size Korea surveys were analyzed. The waist height, hip height, torso and arm lengths, and torso and upper limb circumferences increased while the arm joint sizes decreased. According to factor analysis, factors 1 and 2 referred to 'the horizontal size of the upper body and limbs' and the 'torso height and upper limb length', respectively, while factors 3 and 4 represented 'shoulder size' and 'upper body length' respectively. In clustering analysis, types 1 and 2 were 'short and fat' and 'tall and thin,' respectively, while types 3 and 4 represented 'tallest and chubby' and 'shortest and small' respectively. Torso length increased in the 30 to 40s in type 1 while torso circumference increased in the 30s and late 40s in type 2. In type 3, shoulders got bigger in the 30s. In type 4, torso circumference increased in the early 30s, and torso length increased in the late 40s. 'Thin' was a typical body shape in the early 30s. Among early 40s men, distribution evolved from 'small' to 'thin.' In the late 40s, while the percentage of 'small' decreased, the ratio of 'obese' increased. In the 50s, 'small' was the most common.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2018

The purpose of this study is to identify the body type characteristics of fashion models by comparing body dimensions and body types of fashion models with ordinary women in their 20s in Korea. To that end, the study selected 71 people, with 28 being female university students in the Seoul area and 43 professional fashion models. One hundred and fifty-seven ordinary woman were selected who ranged from 20 to 29 years old, and 588 women from the 7th Size Korea fit for research purposes. Body measurement items were selected for the direct measurement data for Size Korea, which included 20 items of body size and 10 items of calculation needed for clothing production. The results of the study were as follows. According to the analysis of fashion models and ordinary woman in their 20s, their body size showed significant differences in 25 out of 30 items. The five items that do not show significant differences are bust point-bust point, waist back length, front interscye length, hip circumference-bust circumference, and neck point to bust point to waistline-waist front length. If you integrate the results, the fashion model is much taller than the ordinary woman, has a longer lower body, and has an 8.05 head figure. Also, the fashion model found itself to be the ideal type that ordinary women prefer because of the slimmer waist and bent shape, which is more than that measured in normal women.

• Journal of the Korean Home Economics Association
• /
• v.40 no.7
• /
• pp.157-172
• /
• 2002

The purpose of this study is to characterize body types of males in their twenties, and to provide information on body types of males by classifying them into groups. In addition, this study attempts to provide ways that can help improve the fit and coverage rate of ready-to-wear clothes by developing an apparel sizing system according to body types. 297 male subjects in their twenties participated in this study. 54 anthropometric and 35 photographic measurements were taken from each subject. After combining the body types of the front and the side into a whole body, we selected typical body types out of the combinations. It is shown that 84.64% of males in their twenties belong to the HI type, H/equation omitted/ type, X/equation omitted/ type, Xl type, Yl type, and HS type. To develop a new size system of clothes, the distribution of sizes was determined by using means and standard deviations for basic parts of each body type. Then, the most optimal sizes were selected separately for each body type to maximize the coverage rate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.8
• /
• pp.1186-1195
• /
• 2002

The purpose of this study was to study the body cathexis according to the age and the degree of obesity of elderly women. The subjects were 342 elderly women aged 60 to 92. Body measurement and survey were taken from July to August 2001. The results are follows; 1) The subjects showed a tendency to be satisfied with their bodies. But they were relatively unsatisfied with the girth of torso parts. 2) The body cathexis was more influenced by the perceived body size than the actual body size. 3) There were significant differences among the age groups in the body cathexis. The 60∼69 age group was more dissatisfied with their bodies than the other age groups. 4) There were significant differences among groups according to Rohrer Index in the body cathexis. The normal group was more satisfied with their bodies than the lean and the obese groups.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.128-141
• /
• 1996

The pourpose of this study is to determine the exact size which can be the basic elements of the fashion design with the measurement of middle-aged women's body, and to grasp the peculiar tomato type of the middle-aged women by compacting each measurement and examing the change of body shape. Making 215 house wives about 40 to 55 years old the subject of this research, we measured the body size from June to August, 1994. After analyzing the data through the 43 item.; of the body measurement, grasping the characteristics of the tomato type, we classified three types of physical standard and looked into the element of body structure. The results were as follows; 1. The average Rohrer index of middle-aged women in Tas-gu is about 1.5 and they usually seem to be fat compared with other groups. 2. Age has much influence on the body change of middle-aged women. Especially around 45 years old, the body change showed remarkable. 3. When analyzing the elements of the body measurement, the biggest elements of middle -aged women's body structure are in the items of width, thickness and girth related to the expansion of body line. Therefore in the middle age, the thickness and the girth have more influence on the human body than the height and the length, so the items of thickness and girth is the most important factor in the somato type. 4. In the slim body and standard body, the thirst factor is the items of height and length related to vertical size and the second is the items of width and thickness and girth. In ice fat body the first factor is the items of width, thickness, girth and the second is those of height, length. Unlike other body shapes, the fat body has many factors, which shows that the fat body has much variation in each part in proportion to fatness.

• Journal of Veterinary Clinics
• /
• v.17 no.1
• /
• pp.168-172
• /
• 2000

Prostatic length and height on sagittal images and prostatic width and height on transverse images were measured ultrasonographically to establish upper limit of the prostate in 45 dogs which were clinically healthy and sexuallly intact. Linear 5regression and correlatin analysis were performed between prostatic parameters(length and height on sagittal images & width and height on transverse images) and parameters related to body size(body weight, left kidney length) and age of the dogs. Prostatic parameters were significantly correlated with body size and age of the dogs. Maximum predicted values with body weight and age for prostatic parameters were determined based o the upper limit of the 95% confidence interval of the mean predicted values. Such values should be useful for the small animal clinicians in determining if the prostate gland is too large for a given body weight and age, and may contribute to clinicl signs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.4
• /
• pp.530-537
• /
• 2000

The purpose of this study is to develop the measuring tool that can grasp the relationship between body and pattern, the result can be directly digitalized and developed as the pattern as body form is. There are 6 measurements; 1) the width of front and rear neck 2) the slant degree of shoulder 3) the degree of protrusion of breasts and scapulae 4) the separation of front and rear board 5) space between body and clothes 6) vertical strand in the clothes Developed measuring tool is handy in un. in which points of body to be measured are small, and it has the capability of designing the high fitness for body. The measurer developed through this study is named as $\ulcorner$Somato-pattern Measurer$\lrcorner$, size paper is named$\ulcorner$Somato-pattern Paper$\lrcorner$and the pattern made by$\ulcorner$Somato-pattern Measurer$\lrcorner$is named$\ulcorner$Somato-pattern$\lrcorner$respectively by our team. The result of this study is thought to make a great contribution to solving the various problems which can be derived in the time of pattern design because of the difference of physical forms in the same size as well as the difference between the factor of size and that of form in body.