• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.117-124
• /
• 2009

To inspect the quality of data collected from a large-scale body measurement and investigation project, it is necessary to establish a proper data editing process. The three-dimensional body measurement may have measuring errors caused from measurer's proficiency or changes in the subject's posture. And it may also have errors caused in the process of algorithm expressing the information obtained from the three-dimensional scanner into numerical values, and in the course of data-processing dealing with numerous data for individuals. When those errors are found, the quality of the measured data is deteriorated, and they consequently reduce the quality of statistics which was conducted on the basis of it. Therefore this study intends to suggest a new way to improve the quality of the data collected from the three-dimensional body measurement by proposing a working procedure identifying data errors and correcting them from the whole data processing procedure-collecting, processing, and analyzing- of the 2004 Size Korea Three-dimensional Body Measurement Project. This study was carried out into three stages: Firstly, we detected erroneous data by examining of logical relations among variables under each edit rule. Secondly, we detected suspicious data through independent examination of individual variable value by sex and age. Finally, we examined scatter-plot matrix of many variables to consider the relationships among them. This simple graphical tool helps us to find out whether some suspicious data exist in the data set or not. As a result of this study, we detected some erroneous data included in the raw data. We figured out that the main errors are not because of the system errors that the three-dimensional body measurement system has but because of the subject's original three-dimensional shape data. Therefore by correcting some erroneous data, we have enhanced data quality.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.92-103
• /
• 2023

As the body shape change which occurs after middle age is the main factor affecting the fit of ready-to-wear clothes, this study was designed to classify and analyze the torso shapes of middle-aged men. This study sorted 3D body scans of 200 men aged 40-64 from the 8th Size Korea (2021) database and extracted their 47 measurement values using the Grasshopper algorithm for automatic extraction landmarks and measurements, developed by the previous research (Ryu & Song, 2022). Eight principal components (torso length, shoulder size, overall body size, abdomen prominence, back protrusion, neck inclination, upper body slope, and hip prominence) were identified and four torso shapes were classified. Shape 1 (28.5%) exhibited the shortest torso length, the narrowest shoulders, and the most protruding back. Shape 2 (21.0%) exhibited the skinniest body and the largest backward inclination of the upper body. Hence, the back appeared to be protruding, and the abdomen looked prominent. Shape 3 (25.5%) had the largest overall body size. Thus, the abdomen looked the least protruding, and it exhibited the flattest back. Shape 4 (25.0%) had the longest torso, widest shoulders, straightest neck, and the least protruding hips. This study suggested these three discriminant functions to identify a new person's torso type.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.222-228
• /
• 2007

In order to solve the problem of traffic holdups and environmental pollution(contamination), several metropolises are operating the subway and many local government plans hereafter the light rail vehicle operation and it is in the process of preparing. This point of time, it need to evaluate the comfortable characteristic of the seat which is closely connected with passenger and it should be reflected to the product design through the data analysis. The methods of the comfortable characteristic evaluation should be considered to various methods from physical factor to psychological factor. Among these, the most universal and possible quantitative measurement estimate through 'Body pressure measurement system'. From this paper, it was measured the body pressure of the subway seat which is in the process of operating in a domestic and it will be compared and analyzed the material & seat shape, so we evaluated the comfortable characteristic of the short-distance transportation railway vehicle. It was operated the man and woman who belongs in standard shape of Korean, we compared and analyzed the Peak position where the body pressure is visible and body pressure spread out.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.13-24
• /
• 2019

Adolescence is a transitional stage of physical development which occurs during the period from puberty to adulthood. Going through this period, various parts of an adolescent's body grow at different rates, leading to different body shapes and proportions when compared to adults. Therefore, this study aimed to investigate the body sizes and shapes of junior high school boys from ages 13-15 based on body measurement items that are used as the basis for school uniform designs including jackets, shirts, and pants. For this, the study sought the basic data needed to develop body shapes and school uniform patterns for junior high school boys using the data from the 6th Size Korea Survey (2010). Specifically, it provided basic data for the development of school uniform patterns that fit well through the classification of bodies into particular types. After extracting body shape componen a cluster analysis using ANOVA was performed. According to the factor analysis conducted to determine body shape components, 5 factors were obtained as follows: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: characteristics of horizontal size, Factor 5: shape of the upper body with a variance of 82.62%. To classify junior high school boys' body shape was determined using various characteristics, and a cluster analysis was performed with the variables obtained by the factor analysis. For this, body shapes were classified into 3 different types: Type 1 accounted for 33.4%, with a total of 463 subjects. This type was a tall, long body individual with the smallest bulk and size. Type 2 accounted for 22.7%, with a total of 315 subjects. This type was large in bulk and horizontal size, but the lowest in height and length. Type 3 accounted for 43.9%, with a total of 610 subjects. This type was close to average in terms of horizontal size, length, and height. To develop well-fitting school uniforms for junior high school students, there should be further studies on changes in body shape and their associated causes. The study results will be available as basic data for comparing branded school uniform patterns for junior high school boys and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• Korean Journal of Human Ecology
• /
• v.13 no.6
• /
• pp.959-966
• /
• 2004

The purpose of this research is to analyze the shape of gathered skirts made by different gatherings. The shape of gathered skirts is affected by the amount of the gatherings that control fullness along a waistline seam. The gap also has an effect on the shape. We made a few experiments to make gathered skirts in different gathering conditions. The conditions include two types of ratio of gathers, which were given the total amount of gathering, and two types of spread of gathers, which were calculated for waist and hip. Experiments were conducted to figure out the dressed shape through 3-D measurement Exyma- WBS, and also to investigate the proportion, area distribution, and gap of the shape of gathered skirts on the horizontal section map with Rapid Form 2004 SP3, a software for 3-D shape analysis. As the results show, there were differences among the proportion, area distribution, and gap of the dressed shape. It showed that the shape on the horizontal section map was different because the shape between waist and hip per parts on body was not the same.

• The Research Journal of the Costume Culture
• /
• v.6 no.3
• /
• pp.201-216
• /
• 1998

This study is aimed at exploring a reasonable and reliable method of measuring pre-school children's somatotypes and there by, data basing the information obtained and classifying their somatotypes, at providing useful data which can be utilized for the design of their dress forms and enhancing the fitness of their apparels. to this end, 330 pre-school children living in the capital area and aged fro m4 to 6 were sampled to be subject to the measurement of their somatotypes. The results of this study can be summarized as follows; 1. As the pre-school children grow, the scales indicating their vertical growth including height could well be measured differently, but those scales indicating their lateral somatotypes which reflect their postural changes did not show among age groups. in other words, male kids were higher in the scales including height than female kids, while there were not differences between sexes in most scales indicating their lateral somatotypes. 2. The elements comprising the somatotypes were the size of body skeleton, the thickness of body mass, the posture and shape of body mass, the lateral under-neck shape, the extrusion of belly, the length between front and the back shoulder, the shape of lower belly, the shape of upper hip, the shape of lower hip and the slope of shoulders. Among them, the first two elements accounted for 64.8% of the total distribution, which means that these two elements explain the body-mass somatotypes of kid's most effectively. 3. The sample kids were divided into two types for classification of their somatotypes. As a result, it was found that the elements determining their somatotypes most influentially are, unlike adults' case the size of body skeleton rather than posture or lateral body shape. The type I showed less dimensions in most scales than type II, while their shoulder were les developed,. The type I was found distributed much in 4-year-old female kids. The type II showing more development in each element was found distributed much in 6-year-old male kids.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.300-307
• /
• 2000

The purpose of this study was to classify and analyze the body type of obese boys who are school year for 9 to 11 years. A total of 49 body measurements were collected for this study including both direct and indirect measurements (33 variables from the direct anthropometric data, 16 variables from the indirect anthropometric data). Data from anthropometric measurement were analyzed using descriptive, factor and cluster analysis. The obese boys investigated in this project were in the category of average height 146.31 cm, weight 52.17 kg. The values for the study were compared to values from the National Anthropometric Survey of Korea. As the result of factor analysis for the classification of body type, 6 factors were extracted from all items. The first was transverse size of upper body, also, the second was its longitudinal size. The third was thicknesses of front and back at side views. The fourth was shoulder shape. The fifth was upper body angle factor. The sixth was upper body length. The body form was classified with cluster analysis, using factor score. The shape of the body was classified in 3 types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.528-542
• /
• 2024

The aim of this study was to analyze and typify the body shape of tall women aged 20-69 using 3D measurement data from the 2020 8^th Human Dimensions Survey data with greater than 165.0 cm in height defined as large stature. Each body type's characteristics were examined to derive points of differentiation compared to women of average body type. The analysis showed that as height increases, body height, length, and generally body circumference, thickness, and width also increase. However, taller women were found to have thinner waists, indicating a wider, flatter waist area. Waist circumference was also smaller, albeit not at a statistically significant level. Body shapes of adult women over 165.0 cm tall were classified into three types. The following body types were analyzed: thick ankles and drooping shoulders, thin and short torso, tall and long, long torso and thick ankles, large body circumference, thickness and width, normal torso length, and short stature and thin ankles. To develop garments for adult women over 165.0 cm tall, a new drafting method was required set the waist, knee height, and shoulder width.

• The Research Journal of the Costume Culture
• /
• v.28 no.1
• /
• pp.1-14
• /
• 2020

This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4-1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)-0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)-1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)-1.2 cm and 3.5 cm. Front chest circumference was C/4-1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4-0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)-0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.