• Journal of the Ergonomics Society of Korea
• /
• v.6 no.1
• /
• pp.33-40
• /
• 1987

To study the body trunk basic to Clothing construction, and study the peculiarities of visual spatial division, necessary items are measured indirectly from 216 unmarried women from 19 to 24 years old by a photographic net-work method. In so doing, the problem of Fashion Design in establishing the location of Darts for Basic Dress is not considered. The following results are obtained. 1) Indirect measuring method, is obtained approximate to actual size, with an error of .+-. 2.8cm. 2) In the modeling plan of Dart location viewed from the visual-spatial division in Basic Dress, it is concluded that Darts are to be placed at the point of 1/3k+1/5k form the waist. From the aesthetic point of wiew, it is more appealling for darts to be placed at the point of 6cm .+-. 0.6cm right or left of center. 3) From direct measurement dart location can be set based on bust point width, and from indirect measurement, dart location can be set based on waist width.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.574-581
• /
• 2012

It is important to analyze the status of water quality with relation to the stream flow to attain water quality goal more effectively in the unit watersheds for the management of Total Maximum Daily Loads (TMDLs). This study developed a flow duration-water quality distribution graph to figure out water quality appearances on the flow variation and analyzed contributions of water quality observations to the impaired water bodies quantitatively by hydrologic conditions. Factors relating to water quality variation can be analyzed more precisely and assessed on the base of quantified contributions. It is considered that this approach could be utilized to establish a more effective plan for the water quality improvement including the prioritization of pollution reduction options.

• Journal of the Korean housing association
• /
• v.14 no.3
• /
• pp.127-136
• /
• 2003

The purpose of this study is to establish concept about a plan direction of preschooler's library, and provide a design type of preschooler's library. As a result, the following findings were obtained: 1) For the preschooler's reading area, it should be segregated between schooler and preschooler. Because there is a difference between a library use action and a development characteristic, it needs to be segregated to avoid conflict using library for both of those groups. 2) The space composition of preschooler's library stands up, and of a tube considers a traffic line of a user according to the function and systematizes a child, and to cause an interest of preschoolers. 3) Furnitures and equipment of preschooler's library must arrange in consideration of human body size of a user in a tube.

• Journal of Korean Physical Therapy Science
• /
• v.4 no.2
• /
• pp.373-382
• /
• 1997

This study has been aimed at figuring out the fact that four kinds of body type grouped according to the tilting of scapular of upper extremity and ilium of low extremity showed the mobility increase for joint parts and the limitation. When we make a thrapy plan which should be comprehensive and general in preventative management and therapy. For the sake of patients who have spinal disabilities including low back pains, it is required for many joints distributing among upper and lower extremity to have hypermobility and hypomobility based on regulation. So, this study was conducted to establish a standard for the effective pattern of hypermobility or hypomobility. I hope that the result of this study can help support the practics of physical therapy as a part of scientic method. Especially I think it will be able to be conductive to those who major in physical therapy on the arthrogenic region.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.341-348
• /
• 2004

Recently deveoped HSS of POSCO and commerciallizing activities were introduced. 590DP, 590FB, 780TRIP. In this year, another three type of hot rolled AHSS will be developed and try to commerciallize with auto makers. 780FB, 780DP and 980CP. We have future plan to develope ultra high strength steels 980TR, 1170CP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.8
• /
• pp.665-672
• /
• 2002

This paper deals with the human-interactive actions of a quadruped robot by using Genetic Algorithm. In case we have to work out the designed plan under the special environments, our robot will be required to have walking capability, and patterns with legs, which are designed like gaits of insect, dog and human. Our quadruped robot (called SERO) is capable of not only the basic actions operated with sensors and actuators but also the various advanced actions including walking trajectories, which are generated by Genetic Algorithm. In this paper, the body and the controller structures are proposed and kinematics analysis are performed. All of the suggested motions of SERO are generated by PC simulation and implemented in real environment successfully.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.103-111
• /
• 1998

This paper describes the initial hull form design process which generate a hull form using a neurofuzzy modeling. Neurofuzzy system is to combine the merits of fuzzy inference system and neural networks. Therefore it has structured knowledge representations as well as adaptive capacities. Initial hull form design stage is the process which generate an adoptable hull form from the limited design information and multi-decidions condidering correlations with design factors. It can be assidted efficiently by neurofuzzy system. This paper suggests two methods of an initial hull form generation using the neurofuzzy modeling and B-spline theory. and examines the usefulness of suggested method through its application examples.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.6
• /
• pp.377-383
• /
• 2015

Torsion mode or bending mode of drive-line for rear-wheel drive vehicle exists in low frequency band. If resonance exists there between natural mode of driveline and powertrain excitation force, drive-line will manifest excessive vibration response. Also, the vibration response can be transmitted to vehicle body and can induce booming noise. A vehicle in this study exhibits a booming noise problem under specific transmission gear condition. To draw performance improvement plan, finite element analysis technique was used. Modification was evaluated qualitatively and priorities were derived. Finally, effectiveness of best modification was verified through test and full vehicle FE analysis.

• Korean Journal of Organic Agriculture
• /
• v.17 no.2
• /
• pp.151-170
• /
• 2009

The objectives of this study were to analysis the nutrient cycles of agricultural by-products. The region, in which agricultural by-products are circulated for use within the agroecosystem for minimizing the input of artificial nutrients as well as generation of wastes, and where ecologically industrial diversity is formed, was defined as the regional agriculture focused on eco-industrial approach. Plan in stages for promoting ahead with the regional agriculture focused on eco-industrial approach is as follows: First of all, "The Consultation Body for Circulating & Using By-products" should be formed. Secondly, usage of agricultural by-products is identified to select the facilities of recycling and its location including the type and amount. Thirdly, the facilities for recycling of resources and infrastructure are installed. Finally, the facilities for recycling and resource circulation system within the area are efficiently managed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.432-435
• /
• 2007

In modern society, automobile is necessary vehicle. Automobile is a series of modern convenient. And the number of automobile is on the increase. But from you to year, automobile accident is on the increase, also. One of most reason that cause automobile accident is drowsiness driving. So, we plan to construct automobile system for drowsiness accident prevention for decreasing automobile accident. In this research, we built a drowsiness detecting device using EDA (Electro Dermal Activity) signal which is electric response in the human body skin. There are SIL (Skin Impedance Level) and SIR (Skin Impedance Response) in EDA. Mostly, SIL consists of DC element. On the other hand, SIL consists of AC element. We could detect the drowsiness condition with SIL and SIR signal.