• 한국의류학회지
• /
• 제32권5호
• /
• pp.846-858
• /
• 2008

This study was designed to propose a method to draft bodice block pattern from 3D body scan data. Subjects were ten elderly women in their 60's, who wear basic size(B: 94cm, W: 82cm) garment. Scanning was done using 3D whole body scanner(WB4, Cyberware). Measurements for 3D data and cross section were attained using Auto CAD, by which a upper bodice pattern for elderly women was drawn on the basis of short measured method. The results are as following: As for most items, no significant differences were shown between measurements from Martin's anthropometry and those from 3D scan data, suggesting measurement from 3D scan data could be used to draft a pattern. The drafting equations acquired were as follows; width of pattern=B/2+5.5, width of waist=W/2+3.5cm, dart amount=8cm. Dart distributions were 23%(B.P.) : 20%(front armpit) : 17%(side seam) : 18%(back armpit) : 15%(back protruded point) : 7% (center back line). Through wearing test using 5-point Likert scale, resultant pattern was evaluated as appropriate for elderly women's pattern to get over 4 point. As a result, it might be said that 3D scanning application is effective for elderly women in that it doesn't take time so much as Martin's anthropometry and that their body shape vary compared with those of young women.

• 대한가정학회지
• /
• 제39권8호
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.347-353
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a suitable basic bodice pattern of Male Sports Athletes by using the 3D virtual twin and virtual garment simulation system. The results were as follows; 1. By using 3D virtual twin and garment simulation, new bodice pattern considered male sports athletes was development. The basic numerical formula were as follows ; surplus of chest girth=9, surplus of back length=1, armhole depth=back length/4+13, half back width=chest girth/5+2.5, front chest width=chest girth/5+3. 2. Wearing test by 3D virtual garment simulation system was useful to evaluate wearing outline, surplus of clothes and garment space. Also it estimated more highly than existing pattern in silhouette and ease amount, confirming that new bodice pattern is appropriate for the male sports athletes. New bodice pattern was evaluated to allow proper space length of chest and waist. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• 대한가정학회지
• /
• 제25권3호
• /
• pp.15-26
• /
• 1987

The purpose of this study was to develop the pattern drafting method which would be suitable to their physical characteristics for the fatty body of 40∼55 aged Korean women who are more than 1.5 Rohrer's Index and 90㎝ bust girth. The study was composed as follows; 1. Body measurement and statistical analysis: One hundred and thirty women were measured on 29 items. Thirty-four items including 29 measured items and 5 calcutated items were analyzed statistically. 1) Mean, standard deviation, variance, maximum, minimum, range were computed. 2) Correlation coefficients between each items were computed. 2. Development of new bodice pattern drafting method: Measurement items necessary to draft new bodice pattern were bust girth, center back waist length, shoulder width, back width, chest and neck base girth. The new pattern was examined through three wearing tests for completion. 3. Evaluation of the new pattern drafting method: The new pattern was objectively evaluated by the sensory test. The sensory evaluation was applied to evaluate the new pattern for the fatty body women by comparint it with the conventional patterns. The results of sensory tests of the new pattern are as follows: 1) The composite reliability coefficient is 0.7698, and the reliability of sensory test shows high. 2) According to a statistical analysis of the result of the 23 items on the questionaire, all the items showed significant differences(α 0.01) between the two, with the new pattern having higher scores. The new pattern is better conventional pattern as the average mark of the former is 3.901 but that of latter is 2.926. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the center front neck point, shoulder point, side line, armscye depth, position of bust point, chest width line, under arm dart and the shoulder line.

• 한국콘텐츠학회논문지
• /
• 제12권9호
• /
• pp.136-145
• /
• 2012

다양한 체형을 지니고 있는 소비자들에게 만족스러운 착용감을 주는 기성복 생산을 위해서는 체형 특성이 반영된 원형 제작이 필요하다. 인체는 체형에 따라 곡면의 형태가 달라지므로, 인체의 곡면 형태를 세분화하여 그 특성을 원형 설계에 반영할 필요가 있다. 그러나 기성복에서는 개인의 체형별 특징을 일일이 반영하기 힘드므로, 기성복 원형 제작에 활용 가능한 체형별 인대 모형이 요구되고 있다. 따라서 본 연구에서는 삼차원 인체스캔 데이터를 활용하여 체형을 분석하고 각 체형에 따른 인대모형 개발 방법을 제시하였다. 30대 성인 여성의 상반신 삼차원 인체 형상 자료를 분석한 결과, 체형 특성은 보통체형, 비만체형, 마른체형으로 분류되었다. 상반신을 기준선을 두어 나누어 계측한 결과, 체형에 따라 유의적인 차이가 나타났다. 계측된 각 부위별 삼차원 인체 치수를 기본 원형 설계 시 허리다트 위치 및 분량 설정에 반영하여 체형별 상반신 기본 원형을 제작하였으며, 이를 바탕으로 입체모형을 제작하여 스캔, 모델링 작업을 거쳐 체형에 맞는 원형 인대 모형을 제시하였다. 인대 모형은 인체의 입체 형상을 만들기 위한 다트선을 포함하고 있어 기본 원형 제작 및 원형 활용에 도움이 될 것으로 사료된다.

• 패션비즈니스
• /
• 제15권3호
• /
• pp.22-31
• /
• 2011

In this study, to develop a bodice pattern for women aged 18~24 years, statistical analysis was conducted using the body measurements from 2004 Size Korea and wearing test was conducted. As a result, ease of the bust level to set a horizontal line was decided to be 4cm, that of front interscye line 0cm, and that of back interscye line 0.7~1cm. And the line which divides the horizontal baseline into halves set as the side line. The conversion formula for decision of the scye depth line in the pattern is B/6 + 3.3(cm) + ease (2.5cm), and if bust circumference is 91 or more, it should be 21cm, and if bust circumference is 76 or less, it should be 18.5cm. The back neck line width is 7cm, front neck line width 6.5cm(back neck line width -0.5cm), and front neck depth 8cm(back neck line width +1cm). The shoulder slope was set as a slope of the hypotenuse of a right-angled triangle, which went out 15cm out of the shoulder point and went down 6cm, with tan$21.7^{\circ}$. To develop a final research pattern, wearing test was performed on the primary research pattern for 21 women aged 18~24 years. As a result, the research pattern was evaluated to be significantly higher.

• 한국가정과교육학회지
• /
• 제5권1호
• /
• pp.45-59
• /
• 1993

The aims of this study are to develop CAI programs for bodice and sleeve pattern drafting for the 3rd grade students in a middle school and to compare the students’achievement degree in using traditional teaching method with that in using CAI programs. On the basis of results above the direction and possibility of using computers in education home economics is another aim. For this study, after the programs are developed, which is on the model of middle school text book, one hundred girl students of 2nd grade of middle school in Songpa Gu, Seoul, who have never given Bodice and Sleep Pattern Drafting lesson are chosen. The students are divided into two groups: one is called comparison group, which is taught by traditional method, the other, experimental group, which is taught by CAI programs. To evalute the learning achivement degree, evaluation test, effectiveness of learning and interest degree test and time test are given. Questionaire investigation about CAI program is given to experimental group. The results of this study are as follows: 1. CAI programs on pattern drafting are developed and can be used in the class. 2. In the tests of achievement degree, of effectiveness, and of interest the experimental group gets higher scores than the comparison group. 3. In the time test about how many students can draft the pattern in a given time, in every step more students in experimental group finished drafting than the comparison group. 4. The students showed interest in CAI programs and played an active part in the using computers. Therefore, using CAI programs in the class of pattern drafting saved the teachers lots of difficulties and enables individual learning improving the effectiveness of learning. I hope the studies of CAI will be established in other field as well as Home Economics, especially clothing part, and computers will be used lively

• International Journal of Costume and Fashion
• /
• 제3권
• /
• pp.13-24
• /
• 2003

The purpose of this study was to examine the changes brought by the upper body form using a three-dimensional human body measurement the gypsum method. The developed plane figure was constructed using paper replica to analyze the dimensional shape of the upper torso and to be able to design clothes suitable for elderly women's physical characteristics. The characteristics are analyzed and compared with existing patterns in order to extract the components for the pattern design. The examination was carried out based on the developed plane figures of upper body surface replicas. Type 1, the bent-forward body form, has a wide gap on the shoulder. In Type 2, the gap of waist line was wide at angulus scapulae point. Type 3 was the thin body form, and the girth of the chest, front interscye breadth and back interscye breadth were more level with one another, compared to the other types. In Type 4, the bent-backward body form, there was a wide gap on front shoulder. Comparison with the developed plane figure and existed pattern, items revealed differences in significance included the front and back interscye width between the measured values of the existed patterns and the developed plane figure. Therefore, the basic components of basic bodice pattern for old women were determined in the up-bust circumference and length of the back.

• 대한가정학회지
• /
• 제41권7호
• /
• pp.185-200
• /
• 2003

The purpose of this study was to investigate the fitness using the draft method to develop moderate-stretch knit block pattern for young women in Korea. The subjects were three women within the range of the ages from 18 to 24 showing the average body figures. In this study, 4 different patterns were drafted for the moderate stretch knitted fabrics, that were categorised into two different types. The first type of these was made up for kilted fabrics and the other was initially drafted for woven fabrics and altered for knitted materials afterward. The major findings derived from this investigation were as follows; 1. According to each sensory evaluation for the appearance test on fitness, knit block patterns A and D were the better than the rest of them. 2. Knit block patterns A and D with higher evaluation scores were drafted with body size measurements except the waist line, whereas patterns B and C with relatively lower scores were produced including the smaller ease amounts than the woven block pattern. 3. To see the results of the functional test based on the designed ten motions for this experiment, knit block patterns A and B were concluded as better than the rest of them. In addition, concerning the arm liking motions, pattern B was scored as the best among the developed patterns.

• 한국지역사회생활과학회지
• /
• 제28권1호
• /
• pp.69-79
• /
• 2017

The purpose of this study was to compare fitting of the upper garment by brassiere cup size and types of bodice block. This study conducted a 3D virtual garment system by applying three types of bodice block (I, II, III) and experimental pattern of the bodice block to 3D avatars of four individuals with the following measurements: under bust circumference of 73.5 cm and bust circumferences of 83.5 cm, 86.0 cm, 88.5 cm, and 91.0cm. The results of the study were as follows. First, for 83.5 cm bust circumference (A Cup), appearance of the three types of bodice block (I, II, III) was appropriate. However, as bust circumference increased in size, shape became inappropriate. The depth and width of the armhole, within 15 cm and 11 cm, respectively, were found to be appropriate. In case of 91.0 cm bust circumference (D Cup), all three bodices (I, II, III) were inappropriate. Second, the results of the draft of the experimental patterns of the bodice block of bust circumference measuring 83.5 cm, 86.0 cm, 88.5 cm, and 91.0 cm in the 3D avatars of the four individuals revealed similarities in the frontal view of the silhouette in the four avatars; in the case of the lateral view of the silhouette, lateral width grew wider as bust circumference of the silhouette became larger, but the shape of armhole showed no changes. The depth of the armhole showed little changes from 15.1 cm to 15.22 cm, and the height of sleeve (armscye depth 13.6 cm within +2 cm) remained similar. The difference in width of the armhole from 11.26 cm to 11.37 cm was rather small. The width of the upper sleeve (8.97 cm) seemed to be appropriate as it remained within the 2-3 cm boundary.