• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.81-89
• /
• 2020

본 논문은 군 위성의 지상 단말 중 하나인 운반형 위성단말의 구성품인 저잡음하향주파수변환기의 설계 및 제작에 관해 기술하였다. 저잡음하향주파수변환기는 물리적으로 하향변환모듈, 저잡음증폭모듈, 송신대역억제필터, 아이솔레이터, 기구, 케이블조립체로 구성된다. LNB의 전기적 요구 규격인 이득, 잡음특성, 불요파 등의 전기적 특성을 만족하기 시뮬레이터(AWR)를 이용하여 설계하였다. 이득, 잡음특성은 각각 61.4dB 및 1.37dB로 측정되었고, 불요파 특성은 각각 -66.79dBc로 측정되었다. 표 1의 전기적 요구 사항 중 상기 3가지 뿐만 아니라 다른 항목에 대해서도 모두 만족함을 확인하였다.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.128-133
• /
• 2011

In this study, the steel material for shipbuilding(LR-A class) was used, and FCAW was taken advantage of 3G attitude and they are welded by different welding ways. As a result of analyzing wave with welding monitoring system, the stable values are obtained which are the first floor(electronic current 164~182 A, voltage 24 V), the second floor(electronic current 174~190 A, voltage 22~25 V), the third floor(electronic current 158~188 A, voltage 22~25 V), and fourth floor(electronic current 172~184 A, voltage 22~25 V), at this time, the stable wave standard deviation and changing coefficient could be obtained. When the welding testing through nondestructive inspection was analyzed know defect of welding, there was no defect of welding in A, D, E, but some porosities in B, and slag conclusion near the surface in C, because the length of arc was not accurate, and the electronic current and voltage was not stable. After observing the change of heat affect zone through micro testing, each organization of floor formed as Grain Refinement, so welding part was fine, the distance of heat affect zone is getting wider up to change the values of the electronic current and voltage. As a result of degree of hardness testing, the hardness orders were the heat affect zone(HAZ), Welding Zone(WZ), and Base Metal(BM). When the distribution of degree of hardness is observed. B is the highest degree of hardness The reason why heat effect zone is higher than welding zone and base metal, welding zone is boiled over melting point($1539^{\circ}C$) and it starts to melt after the result of analysis through metal microscope, so we can know that delicate tissue is created at the welding zone. Therefore, in order to get the optimal conditions of the welding, the proper current of the welding and voltage is needed. Furthermore the precise work of welding is required.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권2호
• /
• pp.89-95
• /
• 2003

In this paper, we have designed and fabricated high conversion gain Q-band active sub-harmonic mixers for a receiver of millimeter wave wireless communication systems. The fabricated active sub-harmonic mixer uses 2nd harmonic signals of a low local oscillator (LO) frequency. The fabricated mixer was successfully integrated by using $0.1{\;}\mu\textrm{m}$GaAs pseudomorphic high electron mobility transistors (PHEMTs) and coplanar waveguide (CPW) structures. From the measurement, it shows that maximum conversion gain of 4.8 dB has obtained at a RF frequency of 40 GHz for 10 dBm LO power of 17.5 GHz. Conversion gain from the fabricated sub-harmonic mixer is one of the best reported thus far. And a phase noise of the 2nd harmonic was obtained -90.23 dBc/Hz at 100 kHz offset. The active sub-harmonic mixer also ensure a high degree of isolations, which are -35.8 dB from LO-to-IF and -40.5 dB from LO-to-RF, respectively, at a LO frequency of 17.5 GHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.100-108
• /
• 2014

Low noise amplifier (LNA) is an integral component of RF receiver and frequently required to operate at wide frequency bands for various wireless system applications. For wideband operation, important performance metrics such as voltage gain, return loss, noise figure and linearity have been carefully investigated and characterized for the proposed LNA. An inductive shunt feedback configuration is successfully employed in the input stage of the proposed LNA which incorporates cascaded networks with a peaking inductor in the buffer stage. Design equations for obtaining low and high impedance-matching frequencies are easily derived, leading to a relatively simple method for circuit implementation. Careful theoretical analysis explains that input impedance can be described in the form of second-order frequency response, where poles and zeros are characterized and utilized for realizing the wideband response. Linearity is significantly improved because the inductor located between the gate and the drain decreases the third-order harmonics at the output. Fabricated in $0.18{\mu}m$ CMOS process, the chip area of this wideband LNA is $0.202mm^2$, including pads. Measurement results illustrate that the input return loss shows less than -7 dB, voltage gain greater than 8 dB, and a little high noise figure around 6-8 dB over 1.5 - 13 GHz. In addition, good linearity (IIP3) of 2.5 dBm is achieved at 8 GHz and 14 mA of current is consumed from a 1.8 V supply.

• 한국발생생물학회지:발생과생식
• /
• 제12권2호
• /
• pp.141-149
• /
• 2008

This study was conducted to develop an efficient cryopreservation method of human embryonic stem (ES) cells using vitrification. In an initial experiment, sub-clumps of human ES cells (CHA-hES3 and CHA-hES4) were vitrified using grids after incubation with STO feeder cells for 1 or 16 h (Groups 1-1 and 1-2, respectively). After storage for $2{\sim}4$ months, thawed clumps were re-plated on a fresh feeder layer. The survival rates of warmed CHA-hES3 and CHA-hES4 cells of Group 1-2 were significantly higher than those of the corresponding Group 1-1 cells. In the second experiment, human ES cells were vitrified after incubation with feeder or feeder-conditioned medium (Groups 2-1 to -7). Relative mRNA expression of BM proteins and survival rates were increased following incubation of ES cells with fresh feeder cells for 16 h. In conclusion, increasing of tight adhesion between ES cells by extended incubation with feeder could reduce cryoinjury after vitrifying/warming.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.181-186
• /
• 2015

In this study, the effect of the friction stir welding (FSW) was compared with that of the gas tungsten arc welding (GTAW) on the microstructure and microhardness of Cu-Ni alloy weldment. The weldment of 10 mm thickness was fabricated by FSW and GTAW, respectively. Both weldments were compared with each other by optical microstructure, microhardness test and grain size measurement. Results of this study suggest that the microhardness decreased from the base metal (BM) to the heat affected zone (HAZ) and increased at fusion zone (FZ) of GTAW and stir zone (SZ) of FSW. the minimum Hv value of both weldment was obtained at HAZ, respectively, which represents the softening zone, whereas Hv value of FSW weldment was little higher than that of GTAW weldment. These phenomena can be explained by the grain size difference between HAZs of each weldment. Grain size was increased at the HAZ during FSW and GTAW. Because FSW is a solid-state joining process obtaining the lower heat-input generated by rotating shoulder than heat generated in the arc of GTAW.

• Journal of Nutrition and Health
• /
• 제39권5호
• /
• pp.476-484
• /
• 2006

To elucidate the relationship between blood parameters related bone metabolism and antioxidant enzyme activity in postmenopausal period 60 women residing in Iksan area were recruited. Food and nutrient intake of each individual subject were estimated by 24-hour recalls of 3 non-consecutive days. The biochemical markers including total protein, albumin, osteocalcin (intact bone gla protein; BOP), calcium, phosphorus and hemoglobin were measured in fasting blood. In addition, parameters of antioxidative capacity including the activities of superoxide dismutase (SOD), glutathione peroxidase (GPx) , catalase (CAT) and total antioxidant capacity (TA) were monitored in blood, also. The mean age, height, weight, and BM! of subjects were 64.8 years, 151.1 em, 59.5 kg $26.0\;kg/m^2$, respectively. The mean SOD, GPx, and CAT activities were 138.5 U/ml, 1,273.8 U/ml and 314.3 kU/l respectively, and TA was 1.16 mmol/l without significant difference among different age groups. BMI was positively correlated with SOD activity (p < 0.01). SOD activity and CAT activity showed positive correlation with serum albumin (p < 0.05) and hemoglobin (p < 0.01). In conclusion, this study revealed that antioxidant enzyme activity holds a significant relationship with the blood parameters like as serum albumin and hemoglobin in postmenopausal women and further systematic research is needed to investigate the their relation mechanism.

• 동의생리병리학회지
• /
• 제16권3호
• /
• pp.499-506
• /
• 2002

Two of the essential processes required for metastasis are neoangiogenesis and tumor cell invasion of basement membranes (BM) and extracellular matrix (ECM). Recently, data showed that herbs removing blood stasis has an anti-angiogenic effects. Tonifying vital Qi and eliminating pathogenic factor was a basic modality in Oriental oncology. In this study, we investigated several Qi and Blood tonics for potent angiogenic inhibitors. Methanol extracts of samples inhibited the proliferation of ECV-304 at the concentration of 100 ㎍/㎖. Zizyphi Fructus, Glycyrrhizae Radix, Angelicae Gigantis Radix decreased the gelatinolytic activity of MMP-9 from ECV-3Q4, at the concentration of 100 ㎍/㎖ in gelatin zymography. In in vitro invasion assay, herbs inhibited the invasion activity of ECV-304 by 53% of control (Ginseng Radix), 39% (Zizyphi Fructus), 36% (Angelicae Gigantis Radix), 25% (Glycyrrhizae Radix). Ginseng Radix inhibited the capillary-like tube formation of ECV-304 at the concentration of 160 ㎍/㎖, Angelicae Gigantis Radix and Paeoniae Radix Alba inhibited at the concentration of 320 ㎍/㎖. These results indicated that Ginseng Radix, Glycyrrhizae Radix, and Angelicae Gigantis Radix could be considered as potent angiogenic inhibitiors.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권3호
• /
• pp.251-262
• /
• 2003

교량의 건설계획단계에서 LCC을 고려한 의사결정이나 공용중인 교량의 체계적인 유지관리 전략을 수립하기 위해서도 최소한의 점검결과만으로 노후화를 예측할 수 있는 LCP가 필요하다. 본 연구에서는 국내외 연구결과를 토대로 무리함수 $y=\sqrt{y^2_0-at}$로 표현되는 LCP를 제안하여 국내외연구결과에서 적용한 D/B에 적용한 결과 상관계수가 0.99이상으로 노후화 경향을 표현할 수 있었으며, 전국에 분포되어 있는 슬래브교량을 대상으로 정밀점검 및 정밀안전진단의 BMS를 Fuzzy Logic을 이용하여 정량적 평가하여 회귀분석을 실시한 결과 0.81의 상관계수를 갖는 노후화 예측모델을 도출할 수 있었다.

• 한국건축시공학회지
• /
• 제16권5호
• /
• pp.397-403
• /
• 2016

건축물의 에너지 절약기준이 강화됨에 따라 단열성능이 우수한 외단열 공법의 적용이 증가 추세에 있으나, 빈번한 화재사고로 외단열 화재확산 방지를 위한 규정이 강화되었다. 따라서, 기존 EPS 외단열 시스템의 단열성능을 확보하면서 화재안전성을 향상하기 위하여 불연성 단열재를 화재확산 방지구조로 적용한 EPS 외단열 시스템의 대형 화재시험을 ISO 13785-2에 의하여 수행하였고, 그 결과, 시간에 따른 시험체의 외형분석에서 EPS 단열재만 사용한 외단열 공법보다 우수한 화재확산 방지효과가 있는 것으로 판단되었고, 온도 및 열류량 측정결과에서도 하단부보다 상단부의 온도 및 열류량이 낮게 측정되어 차열효과가 있는 것으로 판단되었다.