• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.149-155
• /
• 2014

A study on the indoor positioning system has been active recently, and TDOA technique using acoustic signal has been used generally. The drawback of the TDOA is very weak against signal distortion due to multipath effect. Especially to estimate the smartphone position, the sound distortion is very severe, and the generated radio signal jitter when using WLAN or Bluetooth as a time reference signal makes the receiver difficult to estimate the position. In this paper, acoustic trigger signal for the receiver preparing the positioning signal reception is proposed, and the mitigation of the multipath effect is shown.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.643-644
• /
• 2018

Recently indoor and outdoor location tracking systems are operated in different ways. The indoor positioning method uses WiFi and BLE beacon positioning, and the outdoor positioning uses GPS and PDR. In this paper, it is a device to measure position by using it. It is used to check whether it is indoors or outdoors when measuring based on a smart phone, A automatic conversion method is needed. When using GPS in the room, it is difficult to distinguish the floor or space. We propose a method to solve this problem.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.1-7
• /
• 2018

Recently, the activity area in the indoor space has been widening. Various types of service technologies have been developed and applied user location, tracking, spatial pattern analysis and environmental analysis in indoor space. BLE-based beacon is used for the service technology in the indoor space. Therefore, in this paper, we collected and analyzed signals for indoor positioning based on beacon. For this purpose, a module was designed to analyze the efficiency of indoor location measurement using beacon. Experimental results show that the accuracy of the measured data at close range is improved. Also, it was analyzed that the more accurate the position data is extracted without the obstacle in the indoor space.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.241-243
• /
• 2015

Recently, There is increasing interest in the IoT(Internet of Thing) as intelligent information service that enables communication between people and things based on internet. In particular the demand for indoor location-based services with the development of smart devices is rapidly increasing. If iBeacon of BLE(Bluetooth Low Energy) is made available to provide a basic signal for the indoor location information measurement then reliability of Indoor location information for unreliable signal data for a variety of reasons, such as signal interference is significantly lowered. In this paper, Proposes a technique for obtaining an effective and reliable location information via genetic operations in order to obtain reliable location information from the iBeacon signal information.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.95-97
• /
• 2016

실내 위치 인식 기술은 여러 기술을 통해 시도되어 왔으며, 대표적인 기술로는 Wi-Fi 기반 위치 인식과 Bluetooth Low Energy 기반의 위치 인식이 있다. 하지만 Bluetooth Low Energy는 10m 거리 밖에선 오차가 많아지고 정밀도가 낮아지는 특성으로 인해 Wi-Fi가 보편화되었다. 본 논문에서는 핑거프린팅 기법을 이용하였을 때 Wi-Fi와 Bluetooth Low Energy의 위치 인식 기술의 성능 분석을 목적으로 기술되었다.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.246-247
• /
• 2008

본 논문에서는 군집간 제어를 위한 이동용 로봇제작과 로봇의 좌표인식, 방향을 찾기 위하여 GPS(Global Positioning System)수신 모듈과 Bluetooth송 수신기를 사용하였다. 실험에 쓰인 모든 이동용 로봇에 GPS수신기와 Bluetooth 송 수신기를 장착하고, GPS 수신기로부터 받은 blaster-이동로봇의 위치좌표를 Bluetooth통신 영역 내에 있는 모든 이동로봇에게 보내면 각 Slave-이동로봇은 Master이동로봇으로부터 받은 위치 좌표를 이용하여 blaster-이동로봇을 중심으로 상대적인 위치, 거리 유지, 진행방향을 계산한다. Master-이동로봇과 Slave-이동로봇 간의 실시간 통신과 일정거리를 유지함으로써 군집간 제어를 할 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.67-70
• /
• 2015

특정 인터넷 서비스는 그 성격에 따라 제한된 위치에서만 서비스를 제공하도록 설계한다. 이러한 시스템 구조에서 사용자의 위치정보는 서비스 접근을 통제하는 과정에서 핵심적으로 사용되며 LSB(Location Based Service), WPS(Wifi Positioning System)와 같은 기술로 제안되었다. 그러나 기존 인증 기법은 대상이 일정하지 않은 불특정 다수의 사용자가 접근하기에 적합하지 않고, 서비스 공급자의 무선 AP를 이용하기 때문에 과도한 서버 부하에 취약하다. 따라서 본 논문에서는 이러한 문제를 해결하기 위해서 Beacon을 이용한 위치기반 인증 시스템을 제안한다. Beacon이란 Bluetooth 기술을 기반으로 근거리 무선 통신 기기이다. 사용자가 서비스 접근 권한을 획득하기 위해 인증 서버에서 요구하는 인증 코드는 BLE(Bluetooth Low Energy)를 사용하는 Beacon이 브로드캐스팅한다. 즉, 사용자는 Beacon이 BLE로 브로드캐스팅한 데이터를 수신할 수 있는 물리적인 범위까지 접근해야 인증 절차를 수행할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.122-124
• /
• 2019

최근 IoT 시스템의 관심도가 높아지고 있어 기본 활용 기술의 방법 중 블루투스 비콘 모드를 이용한 정확한 위치 탐지 방법에 대한 연구가 진행되고 있다. 본 논문에서는 블루투스 모듈의 비콘 모드를 활성화하여 불특정 다수의 사용자들에게서 획득한 정보의 고유아이디(UUID, Universally Unique Identifiers) 식별 및 특정 기기의 위치를 파악하여 해당 UUID의 위치 탐지 방법을 제안하였다. 비콘 정보의 수신신호세기(RSSI, Received Signal Strength Indicator)값을 이용하여 불특정 사용자의 위치를 탐지하고, 설정된 RSSI의 범위 구간에 따라 탐지 객체의 IoT 모듈에 접근 여부를 판단하고, 접근이 감지되었을 때 해당 모듈의 IoT 모듈의 기능을 작동시키는 방식으로 활용할 수 있다. 또한, 위치 탐지의 정확성을 위해 RSSI의 데이터를 저장하고, 저장된 데이터 관찰을 통하여 해당 블루투스의 위치 데이터를 보다 정확하게 파악하는 시스템을 설계하였다.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.1
• /
• pp.45-49
• /
• 2022

In this paper, we propose a method for estimating the error of the Ultra-Wideband (UWB) distance measurement using the channel impulse response (CIR) of the UWB signal based on machine learning. Due to the recent demand for indoor location-based services, wireless signal-based localization technologies are being studied, such as UWB, Wi-Fi, and Bluetooth. The constructive obstacles constituting the indoor environment make the distance measurement of UWB inaccurate, which lowers the indoor localization accuracy. Therefore, we apply machine learning to learn the characteristics of UWB signals and estimate the error of UWB distance measurements. In addition, the performance of the proposed algorithm is analyzed through experiments in an indoor environment composed of various walls.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.163-165
• /
• 2006

The subway passengers are usually alert to the current location of the train in order not to miss the destination or transfer stations. The Global Positioning System (GPS), although expensive, can give an alarm if properly programmed, but cannot receive the satellite signals, underground. Therefore, a novel approach to context-aware location-based subway information system is motivated. The passengers, who are equipped with mobile devices such as laptop, PDA, and mobile phone as clients of the Personal Area Network (PAN), request the Bluetooth connection to the server which is installed in each car of the train. While the sorrel broadcasts the location-based information including the previous station, the current velocity of the train, the distance and time to the next station, the clients provide additional services based on the recognized context of the information, and what the passengers individually want. The services are spontaneous and autonomous rather than passive. The services include not only the information on the nearby stations, exit numbers, connection buses but also the location-based alarms which can be set specific to various personal requests, and sounded by the location of the train rather than time. Whereas the arrival time may not be accurate due to the delays of the train, the location can be accurately traced and broadcast by the server. Also, the clients do not need any expensive systems like GFS. Towards validating the proposed approach, we implemented a Bluetooth PAN including a PC server, two PDA clients and a laptop client. We modeled a train on the Incheon Subway Line #1 and a train on the Seoul-to-Incheon Line on the server, simulated the virtual trains together with the real clients. and verified that all the services were successfully provided.