• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.96-99
• /
• 2002

The dual band meandered PIFA has been designed, fabricated, and measured. The measured impedance bandwidth is 9.24% @2.45㎓ (2.27-2.49㎓) and 16.33% @5.75㎓(4.95-5.83㎓), repectively. The radiation patterns are similar to those of a typical PIFA. The antenna gains of each resonant frequencies are 5.06(@2.38㎓), 5.95(@5.39㎓) ㏈i respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1608-1615
• /
• 2010

In this paper, we proposed the method called "DoublePico"(Double Piconet) forovercoming low data transmission rate in a scatternet. This needs a new Ad-hoc network topology to transmit with high rate. Every node performs the function of the relay station. DoublePico has two bluetooth devices that should form two different poconets; every node can make a link between two different piconets. Two different piconets are linked in one node by the link with two bluetooth divices thereby forming the Ad-Hoc network. In this paper, we shows the method of DoublePico which supports about 457kbps of the maximum data transmission rate. This method supports a higher data transmission rate than the traditional bluetooth's Ad-Hoc topology by using analysis and comparison of existing algorithm of bluetooth specification and simulation results. Specifically, this paper focuses on the impact of intererence on the PER (Packet Error Rate), throughput performance, and the throughput improvement with SAW(Stop and Wait)-ARQ scheme in DoublePico.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.959-968
• /
• 2022

In this paper, we intend to develop a cart with the convenience of moving objects or items that are difficult to hold by the hand of the disabled and the elderly from outdoor activities to a moving location. Using GPS module, DC motor, Bluetooth module, magnetometer sensor, and Blynk application, the smart follow cart was programmed to accurately know the owner's location while following the cart. The values of latitude and longitude of the magnetometer sensor are set so that the correct leverage value can be obtained in the lead for fine adjustment of the start and stop angles so that the user's position can be freely detected. The above motor driver L298n was connected to the motor to drive the DC motor at a fine angle. A smart follow cart was implemented that receives location signals according to the direction of the owner by turning on/off the mobile phone app as a switching role by connecting the GPS through Bluetooth wireless communication using a smartphone.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.1122-1140
• /
• 2024

The importance of indoor positioning has grown in numerous application areas such as emergency response, logistics, and industrial automation. In ships, indoor positioning is also needed to provide services to passengers on board. Due to the complex structure and dynamic nature of ship environments, conventional positioning techniques have limitations in providing accurate positions. Compared to other indoor positioning technologies, Bluetooth 5.1-based indoor positioning technology is highly suitable for ship environments. Bluetooth 5.1 attains centimeter-level positioning accuracy by collecting In-phase and Quadrature (IQ) samples from wireless signals. However, distorted IQ samples can lead to significant errors in the final estimated position. Therefore, we propose an indoor positioning method for ships that utilizes a Deep Neural Network (DNN) combined with IQ fingerprint maps to overcome the challenges associated with accurate location detection within the ship. The results indicate that the accuracy of our proposed method can reach up to 97.76%.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.309-312
• /
• 2014

A novel compact pattern diversity slot antenna for ultra-wideband (UWB) and Bluetooth applications is presented. This antenna consists of two modified coplanar waveguides that feed staircase-shaped radiating elements, wherein two different fork-like stubs are placed at the $45{\circ}$ axis. The measured results show that this proposed antenna operates from 2.3 GHz to 12.5 GHz, covering Bluetooth, WLAN, WiMAX, and UWB. The performance of radiation patterns and the corresponding envelope correlation coefficient prove this antenna is suitable for MIMO/diversity systems. Also, the antenna's compact size makes it a good candidate for portable devices.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.206-214
• /
• 2002

In this paper, it is designed and verified the baseband system that performs various protocol functions of specification of the Bluetooth system. In order to verify the developed circuits, various baseband functions are tested by using the ModelSim simulator. The developed circuits operate at 4MHz main clock. Test suite includes hap selection function, generation of the sync word, error correction(1/3 rate FEC, 2/3 rate FEC), HEC generation/checking, CRC generation/checking, data whitening/dewhitening and packet trans/reception procedure. etc. As a result of the simulation, it is verified that the developed baseband system conform to the specification of the Bluetooth system.

• The Journal of Information Technology
• /
• v.5 no.1
• /
• pp.69-77
• /
• 2002

The Bluetooth is expected to be one of the most popular wireless telecommunication technology in the near future, and the protocol stack is essential to providing the various services with the Bluetooth-embedding systems or devices. The Bluetooth specification is an open, global specification defining the complete system, however, the protocol stack is usually implemented partly in hardware and partly as software running on its system, with different implementations partitioning the functionality between hardware and software in different ways. I investigate how to design and implement the Bluetooth protocol stack according to its specification. I focus on the HCI and the lower layer of the software protocol stack as a basic step for the development of our own protocol stack. As a result, paper provides how to partitioning the role of HCI layer, and how to implement the relationship between HCI packets, it's functionality and the flow control. Experiments show the discovering other Bluetooth devices and their connection. Furthermore experiments demonstrate the proper operation of data communication between the Bluetooth modules.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.297-301
• /
• 2001

In this paper, a system that transmits ECG signals which get from hand baggage ECG is implemented by using Bluetooth technology. Bluetooth technology is a close range wireless communication used wireless frequency 2.4GHz bandwidth. This technology consumes very small power and provides high reliability also self error correction with high speed frequency hopping. Because every device which uses Bluetooth protocol can communicate each other. These can connect between the system implemented and any devices such as mobile telephone with Bluetooth module, notebook, and the personal mobile device. Also, the paper proposes capability of transmission to the sever of hospital through each type of wireless communication device that acquired medical information signals in mobile medical machine. The system consists of hardware parts with Bluetooth module and host part, and software parts with blutooth protocol stacks. The host precesses a connection with other device and transmits ECG signals with bluetooth frequency hopping sequence.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.173-178
• /
• 2010

In this paper, we analyze the performance of multilink Bluetooth service and design the multilink application between various Bluetooth devices. There are many restrictions for the Bluetooth based multilink services. Especially, these restrictions occur due to SCO and ACL which construct logical links. In forming ake a scatternet, only one SCO link can be utilized. Also, the number of ACL link depends on the number of RFCOMM channels. High quality audio data streaming cannot be supported by using SCO link. In that case, ACL link should be used for the audio streaming and the data rate of other data links decreases. We implemented the multilink services to verify the considerations for the multilink service.

• Journal of Information Processing Systems
• /
• v.5 no.4
• /
• pp.167-174
• /
• 2009

Nowadays, it has become common to equip a device with Bluetooth. As such devices become pervasive in the world; much work has been done on forming them into a network, however, almost all the Bluetooth Scatternet Formation Algorithms assume devices are homogeneous. Even the exceptional algorithms barely mentioned a little about the different characteristics of devices like computational abilities, traffic loads for special nodes like bridge nodes or super nodes, which are usually the bottleneck in the scatternet. In this paper, we treat the devices differently not only based on the hardware characteristics, but also considering other conditions like different classes, different groups and so on. We use a two-phase Scatternet Formation Algorithm here: in the first phase, construct scatternets for a specified kind of devices; in the second phase, connect these scatternets by using least other kinds of devices as bridge nodes. Finally, we give some applications to show the benefit of classification.