• Title/Summary/Keyword: Block Cleaning

Search Result 25, Processing Time 0.023 seconds

An Optimized File System for SSD (SSD를 위한 최적화 파일시스템)

  • Park, Je-Ho
    • Journal of the Semiconductor & Display Technology
    • /
    • v.9 no.2
    • /
    • pp.67-72
    • /
    • 2010
  • Recently increasing application of flash memory in mobile and ubiquitous related devices is due to its non-volatility, fast response time, shock resistance and low power consumption. Following this trend, SSD(Solid State Disk) using multiple flash chips, instead of hard-drive based storage system, started to widely used for its advantageous features. However, flash memory based storage subsystem should resolve the performance bottleneck for writing in perspective of speed and lifetime according to its disadvantageous physical property. In order to provide tangible performance, solutions are studied in aspect of reclaiming of invalid regions by decreasing the number of erasures and distributing the erasures uniformly over the whole memory space as much as possible. In this paper, we study flash memory recycling algorithms with multiple management units and demonstrate that the proposed algorithm provides feasible performance. The proposed method utilizes the partitions of the memory space by utilizing threshold values and reconfigures the management units if necessary. The performance of the proposed policies is evaluated through a number of simulation based experiments.

Palaeomagnetism of the Okchon Belt, Korea: Paleozoic Rocks in Yemi Area (옥천대에 대한 고자기 연구: 예미지역 고생대 지층의 잔류자기)

  • 김인수;김성욱;최은경
    • Economic and Environmental Geology
    • /
    • v.34 no.4
    • /
    • pp.355-373
    • /
    • 2001
  • Palaeomagnesim of Paleozoic Tuwibong Type Sequence in Yemi area was studied with a total of 256 core-samples collected from 23 sites. The study area (geographical coordinates: 37.l8$^{\circ}$N, l28.610E) is located between Taebaek and Yongwol belonging to the northeastern part of the Okchon Belt. Thermal cleaning was a most effective method to extract stable characteristic remanent magnetization (ChRM) direction, even though AF cleaning also worked on some specimens. Mean ChRM direction of the Cambrian Hwajol Formation was different from the present-day field direction and showed maximum clustering (max. k value) at 100% bedding-tilt correction. However, it could not pass the fold test. Ordovician Makkol and Kosong Limestones as well as Permian Sadong and Kobangsan Formations have very weak NRM, and were remagnetized into the present-day field direction. ChRM directions from the Carboniferous Hongjom Formation passed both fold and reversal tests. IRM experiments and blocking temperature spectrum indicate that both magnetite and haematite are carrier of the primary magnetization. Palaeomagnetic pole position from the Carboniferous Hongjom Formation is very similar to that of contemporary North China Block (NCB) suggesting that the study area was a part of, or located very near to, the NCB during Carboniferous.

  • PDF

Conservation Treatment of Modern Cultural Heritage Rickshaw (근·현대문화재 인력거 보존처리)

  • Kim, Soo Chul;Park, Jung Hae;Jang, Han Ul;Choi, Jae Wan;Ahn, Joo Young
    • Journal of Conservation Science
    • /
    • v.32 no.2
    • /
    • pp.203-213
    • /
    • 2016
  • Conservation treatment of modern cultural heritage rickshaw from National Museum of Korean Contemporary History were carried out. The Rickshaw is divided into three parts which are chair part, sun-block cover part, wheels part. Treatment was referred to analysis results of P-XRF, species identification, FT-IR and microscope observation on Rickshaw. Outer films of rickshaw were chipped off. Therefore, conservation and restoration treatment were carried out in the damaged area. Degradation in armrest, saddle and backside of chair may cause serious problem. Therefore, the reinforcement were carried out with similar materials. Dry and wet cleaning were performed in sun-block cover to remove white stain and corrosion contaminant. Furthermore, reinforcement and restoration were performed in damaged area. Rickshaw from National Museum of Korean Contemporary History was made with various materials. This research result expects to be a great example of conservation treatment for modern cultural heritage which is made of various materials and to be used as useful data for conservation and restoration in modern cultural heritage.

Preparation of Water-Resistant Hydrophilic Coating Solutions for PET film (내수성이 우수한 PET 필름용 친수성 코팅액의 제조)

  • Lee, Soo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.31 no.4
    • /
    • pp.584-594
    • /
    • 2014
  • To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.

A Study on the Development and Application of an Automatic Injection Type Lubrication System for the Cleaning of the Line Switching Part (선로전환부 청결을 위한 자동 분사형 윤활시스템 개발에 관한 연구)

  • In-Chul Lee;You-Shin Lee
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.26 no.3
    • /
    • pp.455-462
    • /
    • 2023
  • In this study, an automatic spraying lubrication system was developed to maintain the cleanliness of the switchgear when detecting the movement of the track through the switchgear. To develop this system, an air tank, valve block, and spray nozzle were designed, and the safety was secured through the pressure test of the prototype after designing the air tank. Furthermore, the environmental aspect was considered by minimizing the use of lubricant by enabling the mixing of air and lubricant through the production of a valve using the Venturi principle. The performance evaluation was conducted by implementing (producing) the injection system, and the product developed in this study was deemed installable in actual switchgear. It is expected that the proposed system will enable the maintenance of the cleanliness of the track during switching and reduce faults and malfunctions caused by switchgear defects.

A Case of the Shoulder-Hand Syndrome Caused by a Crush Injury of the Shoulder (견관절부 외상후 발생된 Shoulder-Hand Syndrome)

  • Jeon, Jae-Soo;Lee, Sung-Keun;Song, Hoo-Bin;Kim, Sun-Jong;Park, Wook;Kim, Sung-Yell
    • The Korean Journal of Pain
    • /
    • v.2 no.2
    • /
    • pp.155-166
    • /
    • 1989
  • Bonica defined, that reflex sympathetic dystrophy (RSD) may develop pain, vasomotor abnoramalities, delayed functional recovery, and dystrophic changes on an affected area without major neurologic injury following trauma, surgery or one of several diseased states. This 45 year old male patient had been crushed on his left shoulder by a heavily laden rear car, during his job street cleaning about 10 years ago (1978). At first the pain was localizea only to the site of injury, but with time, it spreaded from the shoulder to the elbow and hand, with swelling. X-ray studies in the local clinic, showed no bone abnormalities of the affected site. During about 10 years following the injury, the had recieved several types of treatments such as nonsteroidal analgesics, steroid injections into the glenoidal cavity (10 times), physical therapy, some oriental herb medicines, and acupuncture over a period of 1~3 months annually. His shoulder pain and it's joint dysfunction persisted with recurrent paroxysmal aggrevation because of being mismanaged or neglected for a sufficiently long period these fore permiting progression of the sympathetic imbalance. On July 14 1988 when he visited our clinic. He complained of burning, aching and had a hyperpathic response or hyperesthesia in touch from the shoulder girdle to the elbow and the hand. Also the skin of the affected area was pale, cold, and there was much sweating of the axilla and palm, but no edema. The shoulder girdle was unable to move due to joint pain with marked weakness. We confirmed skin temperatures $5^{\circ}C$ lower than those of the unaffected axilla, elbow and palm of his hand, and his nails were slightly ridged with lateral arching and some were brittle. On X-ray findings of both the shoulder AP & lateral view, the left humerus and joint area showed diffuse post-traumatic osteoporosis and fibrous ankylozing with an osteoarthritis-like appearance. For evaluating the RSD and it's relief of pain, the left cervical sympathetic ganglion was blocked by injecting 0.5% bupivacaine 5 ml with normal saline 5 ml (=SGB). After 15 minutes following the SGB, the clinical efficacy of the block by the patients subjective score of pain intensity (=PSSPI), showed a 50% reduction of his shoulder and arm pain, which was burning in quality, and a hyperpathic response against palpation by the examiner. The skin temperatures of the axilla and palm rose to $4{\sim}5^{\circ}C$ more than those before the SGB. He felt that his left face and upper extremity became warmer than before the SGB, and that he had reduced sweating on his axilla and his palm. Horner's sign was also observed on his face and eyes. But his deep shoulder joint pain was not improved. For the control of the remaining shoulder joint pain, after 45 minutes following the SGB, a somatic sensory block was performed by injecting 0.5% bupivacaine 6 ml mixed with salmon calcitonin, $Tridol^{(R)}$, $Polydyn^{(R)}$ and triamcinolone into the fossa of the acromioclavicular joint region. The clinical effect of the somatic block showed an 80% releif of the deep joint pain by the PSSPI of the joint motion. Both blocks, as the above mentioned, were repeated a total of 28 times respectively, during 6 months, except the steroid was used just 3 times from the start. For maintaining the relieved pain level whilst using both blocks, we prescribed a low dose of clonazepam, prazocin, $Etravil^{(R)}$, codeine, etodolac micronized and antacids over 6 months. The result of the treatments were as follows; 1) The burning, aching and hyperpathic condition which accompanied with vaosmotor and pseudomotor dysfunction, disappeared gradually to almost nothing, within 3 weeks from the starting of the blocks every other day. 2) The joint disability of the affected area was improved little by little within 6 months. 3) The post-traumatic osteoporosis, fibrous ankylosis and marginal sclerosis with a narrowed joint, showed not much improvement on the X-ray findings (on April 25, 1989) 10 months later in the follow-up. 4) Now he has returned to his job as a street cleaner.

  • PDF

Bleaching Treatment of Excavated Costumes and Inference of Missing Fabrics - Conservation Treatment of General Kim’s Costumes - (출토 의복의 표백과 유실된 직물의 추정 - 충장공 김덕령장군 의복(중요민속자료 111 호)의 보존처리 -)

  • Lee Mee-Sik;Hong Moom-Kyung;Bae Soon-Wha;Ahn Myung-Sook
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.30 no.7 s.155
    • /
    • pp.1160-1167
    • /
    • 2006
  • The most ideal textile conservation is to block oxygen and light from historical textiles. However it is not possible because historical textiles should be examined, cleaned, restored, and exhibited to find out its historical value. Most of excavated costumes were severely stained and soiled. They are dark yellowish brown in color. To reduce the extent and intensity of the staining and to recover the original color of gray fabrics, bleaching would be required. Conservation treatment was carried out on the 8 historical costumes which belonged to General Duk-Ryung Kim(1567-1596). Two of them do not hold the fabrics. They hold only cotton wool and a little piece of fabrics. Even though these costumes underwent the conservation treatment in 1979, they were stained and needed re-treatment. This time, they were dual-bleached using hydrogen peroxide and sodiumborohydride followed by wet cleaning to reduce the soils and stains. The treatments improved the appearance of costumes. Through the analysis of the trace of fabric, carbonized fabric fragment, and fabrics remained in other garments, we concluded the missing fabrics to be ramie or cotton. It is different result from the primary report concluded to be silk.

Investigation on Selective Mechanization for Wet Season Rice Cultivation in Bangladesh

  • Islam, AKM Saiful;Islam, Md Tariqul;Rahman, Md Shakilur;Rahman, Md Abdur;Kim, Youngjung
    • Journal of Biosystems Engineering
    • /
    • v.41 no.4
    • /
    • pp.294-303
    • /
    • 2016
  • Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.

A Study on the Preparation of Solvent-Free Low Foaming Scouring Agents (무용제형 저기포성 정련제의 제조에 관한 연구)

  • Keun, Jang-Hyoun;Kim, Seung-Jin;Hahm, Hyun-Sik;Park, Hong-Soo
    • Applied Chemistry for Engineering
    • /
    • v.4 no.4
    • /
    • pp.760-769
    • /
    • 1993
  • Solvent-free low foaming scouring agents(LFSA) were prepared by blending of polyoxyethylene(30) octadecylbenzylammonium chloride(POAC), block copolymer of propylene oxide-ethylene oxide[p(PO-b-EO) glycol], Sedlan FF-200(FF-200) and sulfonic acid-amine condensate of polyoxyethylene(10) nonylphenyl ether(PSAC). In consequence of several tests, FF-200/POAC/p(PO-b-EO) glycol/PSAC/water (20g/10g/5g/5g/60g) mixture (LFSA-5) showed good cleaning power, penetrating ability, emulsifiability and stability to alkali, and gave less problem in water pollution. Scouring effect of LFSA-5 was investigated by the change of percentage of exhaustion before and after scouring at various dyeing temperatures. The percentage of exhaustion of the unscoured PET fabric was 4.5% at $70^{\circ}C$, while that scoured with LFSA-5 was 1.3% at the same temperature, which proved LFSA-5 to be a good scouring agent. Moreover, the foaming power of LFSA-5 measured by Ross and Miles method was 6mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 20mm at $80^{\circ}C$. As a result, LFSA-5 proved a good low foaming scouring agent.

  • PDF

MORPHOLOGIC ANALYSIS OF C-SHAPED ROOT USING 3-D RECONSTRUCTION (3차원 재구성법에 의한 C-shaped root의 형태분석)

  • Jung, Eun-Hee;Shin, Dong-Hoon
    • Restorative Dentistry and Endodontics
    • /
    • v.27 no.4
    • /
    • pp.421-431
    • /
    • 2002
  • C-shaped canal configuration is very difficult to treat because that clues about preoperative canal anatomy cannot be ascertained from clinical crown morphology and limited information can be derived from radiographic examination. This study was done to get more informations about the root and canal configuration of C-shape root by 3-dimensionally reconstructing for the purpose of enhancing success rate of endodontic treatment. 30 mandibular molars with C-shaped root were selected. Six photo images from occlusal, apical, mesial, distal, buccal, lingual directions and radiographic view were taken as preoperative ones to compare them with 3-D image. After crown reduction to the level of 1-2mm over pulpal floor was performed, teeth were stored in 5.25% sodium hypochlorite solution for the removal of pulp tissue and debris. They were cleaned under running water, allowed to bench dry and embedded in a self-curing resin. This resin block was serially ground with a microtome (Accutom-50, Struers, Denmark) and the image of each level was recorded by digital camera (FinePix S1-pro, Fuji Co., Japan). The thickness of each section was 0.25mm. Photographs of serial sections through all root canal were digitized using Adobe Photoshop 5.0 and then minimum thickness of open and closed sites were measured (open site is the surface containing occluso-apical groove closed site is oppsite). After dizitization using 3-D Doctor (Able software Corp, USA). 3D reconstruction of the outer surface of tooth and the inner surface of pulp space was made. Canal classsification of C-shaped roots was performed from this 3-D reconstructed image. The results were as follows : 1. Most C-shape rooted teeth showed lingual groove (28/30). 2 According to Vertuccis' calssification, type I, II, III, IV, VII were observed. but also new canal types suck as 2-3-2, 1-2-3-2. 2-3-2-1, 2-3-2-3 were shown. 3 There was little difference in minimum thickness on coronal and apical portions, but open site were thinner than closed site on mid portion. Conclusively, 3D reconstruction method could make the exact configurations of C-shape root possible to be visualized and analyzed from multi-directions. Data from minimum thickness recommend cleaning and shaping be more carefully done on dangerous mid portion.