• The Journal of the Acoustical Society of Korea
• /
• 제23권2E호
• /
• pp.56-67
• /
• 2004

Despite abundant research outcomes of blind source separation (BSS) in many types of simulated environments, their performances are still not satisfactory to be applied to the real environments. The major obstacle may seem the finite filter length of the assumed mixing model and the nonlinear sensor noises. This paper presents a two-step speech enhancement method with multiple microphone inputs. The first step performs a frequency-domain BSS algorithm to produce multiple outputs without any prior knowledge of the mixed source signals. The second step further removes the remaining cross-channel interference by a spectral cancellation approach using a probabilistic source absence/presence detection technique. The desired primary source is detected every frame of the signal, and the secondary source is estimated in the power spectral domain using the other BSS output as a reference interfering source. Then the estimated secondary source is subtracted to reduce the cross-channel interference. Our experimental results show good separation enhancement performances on the real recordings of speech and music signals compared to the conventional BSS methods.

• 한국통신학회논문지
• /
• 제37권6A호
• /
• pp.473-479
• /
• 2012

본 논문에서는 가우시안 2-군집 모델을 사용한 블라인드 등화 방법을 제안한다. 제안 방식에서는 M-QAM 수신 신호를 가우시안 분포하는 2-군집으로 모델링하여 계산 복잡성을 최소화하고 신호 추정의 신뢰도를 높였다. 여기에 가변 파라미터 비선형 추정기를 사용하여 송신 신호를 추정하고, 신호 추정 시 군집의 분산에 따라 축소신호점과 원신호점을 선택적으로 적용하여 신호 추정의 신뢰도를 더욱 개선하였다. 결과적으로 제안 방식은 등화기의 계산 복잡성을 단순화하면서 성능을 개선하였다. 모의실험을 통해 64-QAM의 고차 신호에 대한 블라인드 등화에서 제안 방식이 기존 방식에 비해 우수한 성능을 보임을 확인하였다.

• Journal of Multimedia Information System
• /
• 제7권4호
• /
• pp.249-256
• /
• 2020

Learning methods using various assistive and smart devices have been developed to enable independent learning of the disabled. Pointer control is the most important consideration for the disabled when controlling a device and the contents of an existing graphical user interface (GUI) environment; however, difficulties can be encountered when using a pointer, depending on the disability type; Although there are individual differences depending on the blind, low vision, and upper limb disability, problems arise in the accuracy of object selection and execution in common. A multimodal interface pilot solution is presented that enables people with various disability types to control web interactions more easily. First, we classify web interaction types using digital devices and derive essential web interactions among them. Second, to solve problems that occur when performing web interactions considering the disability type, the necessary technology according to the characteristics of each disability type is presented. Finally, a pilot solution for the multimodal interface for each disability type is proposed. We identified three disability types and developed solutions for each type. We developed a remote-control operation voice interface for blind people and a voice output interface applying the selective focusing technique for low-vision people. Finally, we developed a gaze-tracking and voice-command interface for GUI operations for people with upper-limb disability.

• ETRI Journal
• /
• 제36권1호
• /
• pp.12-21
• /
• 2014

In this paper, we propose a new digital blind in-phase/quadrature-phase (I/Q) mismatch compensation technique for image rejection in a direct-conversion receiver (DCR). The proposed image-rejection circuit adopts DC offset cancellation and a sign-sign least mean squares (LMS) algorithm with a unique step size adaptation both for a fast and precise I/Q mismatch estimation. In addition, several performance-optimizing design considerations related to accuracy, speed, and hardware simplicity are discussed. The implementation of the proposed circuit in an FPGA results in an image-rejection ratio (IRR) of 65 dB, which is the best performance with modulated signals, along with an adaptation time of 0.9 seconds, which is a tenfold increase in the compensation speed as compared to previously reported circuits. The proposed technique will be a promising solution in the area of image rejection to increase both the speed and accuracy of future DCRs.

• 방송공학회논문지
• /
• 제9권1호
• /
• pp.9-16
• /
• 2004

본 논문에서는 차량용 음성명령어기의 사용을 위한 전처리 과정으로 음성개선 방법을 다룬다 특히 보다 주위 소음에 자유롭고 단말 조작에 있어 안정성을 보장하기 위하여 일반적 단일 마이크로폰으로 처리되는 잡음뿐만 아니라 음성명령어를 제외한 오디오 신호 등 비정적 통계적 특성을 갖는 소음들도 제거 될 수 있도록 음성개선 방법을 제안한다. 우리는 2개의 마이크로폰을 가지고 BSS 알고리즘을 적용하여 비정적 신호들을 분리하고, 분리된 신호에 대하여 Kalman 필터를 이용하여 시간상 단구간 정적 잡음을 제거한다. 인식 실험 결과를 통하여 공간적, 시간적 음성개선 방법이 순차적으로 적용될 때, 실제 차량 환경에서 음성 개선 알고리즘으로 적용될 수 있음을 보였다.

• Smart Structures and Systems
• /
• 제17권3호
• /
• pp.413-429
• /
• 2016

The recent research on proper orthogonal decomposition (POD) has revealed the linkage between proper orthogonal modes and linear normal modes. This paper presents an investigation into the modal identifiability of an instrumented cable-stayed bridge using an adapted POD technique with a band-pass filtering scheme. The band-pass POD method is applied to the datasets available for this benchmark study, aiming to identify the vibration modes of the bridge and find out the so-called deficient modes which are unidentifiable under normal excitation conditions. It turns out that the second mode of the bridge cannot be stably identified under weak wind conditions and is therefore regarded as a deficient mode. To judge if the deficient mode is due to its low contribution to the structural response under weak wind conditions, modal coordinates are derived for different modes by the band-pass POD technique and an energy participation factor is defined to evaluate the energy participation of each vibration mode under different wind excitation conditions. From the non-blind datasets, it is found that the vibration modes can be reliably identified only when the energy participation factor exceeds a certain threshold value. With the identified threshold value, modal identifiability in use of the blind datasets from the same structure is examined.

• 한국음향학회지
• /
• 제25권1호
• /
• pp.14-20
• /
• 2006

본 논문에서는 지연혼합에서의 암묵신호분리를 위해 분리행렬의 초기 값을 설정하는 방법을 제안한다. 혼합신호의 상호상관행렬에 대한 고유분리를 분석한 후, 고유벡터의 지연정보를 이용하여 초기 값으로 설정한다. 제안하는 방법을 기존의 주파수영역 독립성분분석 (FDICA: Frequency domain independent component analysis)에 초기 값으로 설정하여 분리 성능을 향상시킨다. 컴퓨터 시뮬레이션을 통해 제안하는 방법이 신호대간섭비 (SIR: Signal to Interference Ratio)가 우수하고 학습곡선의 수렴속도가 개선됨을 보인다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.128-141
• /
• 2015

Independent Component Analysis (ICA), one of the blind source separation methods, can be applied for extracting unknown source signals only from received signals. This is accomplished by finding statistical independence of signal mixtures and has been successfully applied to myriad fields such as medical science, image processing, and numerous others. Nevertheless, there are inherent problems that have been reported when using this technique: instability and invalid ordering of separated signals, particularly when using a conventional ICA technique in vibratory source signal identification of complex structures. In this study, a simple iterative algorithm of the conventional ICA has been proposed to mitigate these problems. The proposed method to extract more stable source signals having valid order includes an iterative and reordering process of extracted mixing matrix to reconstruct finally converged source signals, referring to the magnitudes of correlation coefficients between the intermediately separated signals and the signals measured on or nearby sources. In order to review the problems of the conventional ICA technique and to validate the proposed method, numerical analyses have been carried out for a virtual response model and a 30 m class submarine model. Moreover, in order to investigate applicability of the proposed method to real problem of complex structure, an experiment has been carried out for a scaled submarine mockup. The results show that the proposed method could resolve the inherent problems of a conventional ICA technique.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.36-42
• /
• 2006

In this paper, a novel post processing using Wiener filtering technique is proposed to p rm further interference reduction in FDICA. Using the proposed method, the target signal components are remained with little attenuation while the interference components are drastically suppressed. The results of experiments show that the proposed method achieves a reduction of the residual crosstalk. Compared to the NLMS method, the proposed method has slightly better separation performance in SIR, and even requires much less computational complexity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.398-398
• /
• 2000

Since there is a blind zone in driver's view around the excavator, industrial accidents between the equipment and the workers within the zone have been occurred frequently. The purpose of this paper is to develop a obstacle recognition system which can prevent such an accident by providing the driver with the information on direction and distance of the obstacle within the blind zone. We designed the ultrasonic sensor based obstacle recognition system which consists of sensor arrays and a control unit connected via CAN(controller area network). The Cross-correlation technique and histogramic probability distribution method are used as a reliable obstacle detection algorithms to remove the environmental noise. The experimental results using a real excavator show the effectiveness of the system.