• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.105.1-105
• /
• 2003

This study was performed to develop the precise and rapid method to distinguish the blended sesame oil through the electronic nose analysis. The sesame oil was blended with corn oil at the ratio of 95:5, 90:10, 80:20(w/w), respectively. Samples were then analyzed by gas chromatography, SPME-GC/MS and the electronic nose composed of 12 metal oxide sensors. The sensetivities(delta Rgas/Rair) of sensors by electronic nose was carried out with principal component analysis(PCA). The proportion of first principal component showed 98.76%. In this study, the electronic nose analysis could be used as a competent method to classify for genuine sesame oil.

• Communications for Statistical Applications and Methods
• /
• v.10 no.1
• /
• pp.135-144
• /
• 2003

This work is concerned with comparison of the recently developed disparity measures for the partial association model in three dimensional categorical data. Data are generated by using simulation on each term in the log-linear model equation based on the partial association model, which is a proposed method in this paper. This alternative Monte Carlo methods are explored to study the behavior of disparity measures such as the power divergence statistic I(λ), the Pearson chi-square statistic X$^2$, the likelihood ratio statistic G$^2$, the blended weight chi-square statistic BWCS(λ), the blended weight Hellinger distance statistic BWHD(λ), and the negative exponential disparity statistic NED(λ) for moderate sample sizes. We find that the power divergence statistic I(2/3) and the blended weight Hellinger distance family BWHD(1/9) are the best tests with respect to size and power.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1041-1044
• /
• 2008

The addition of chemical inert filler in blended cement, such as limestone or chemical inert silica fume, will produce a physical effect on cement hydration. Due to the high surface area of inert filler in the mixtures, it provides sites for the nucleation and growth of hydration products, thus improving the hydration rate of cement compounds and consequently increasing the strength at early age. This paper proposes a model of hydration of Portland cement blended with chemical inert filler. This model considers the influence of water to cement ratio, cement particle size, cement composition and addition of chemical inert filler on hydration. The heat evolution, degree of hydration and porosity are obtained as accompanied results in hydration process. The prediction results agree well with experiment results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.143-144
• /
• 2023

This study aimed to evaluate the feasibility of estimating the setting time and compressive strength in Ternary Blended Concrete(TBC) using Settimeter, Strength meter, and Hybrid meter. It was determined that the hardness values at the initial setting time and final setting time of Settimeter, Hybrid meter, and at the 5 MPa of Strength meter were not affected by the mixing ratio of TBC. However, future studies need to consider the errors caused by the instability of the measurement surface during condensation and the state of the measurement surface after hardening.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.327-336
• /
• 2022

Due to the COVID-19 pandemic, the ratio of online education in domestic universities has rapidly increased. This research has developed a curriculum that can be blended with online education-especaally for building construction. The realities of building construction education provided by domestic universities during the COVID-19 pandemic were analyzed. It was revealed that approximately 66.1% of the education was provided online, while approximately 33.9% of the education was provided in the form of face-to-face lectures. It was thus found that the ratio of online education had rapidly increased. We developed a blended learning curriculum of building construction subjects. The curriculum focused on weekly education procedures and the contents of education for each 15-week period. The curriculum proposed by this research could be applied flexibly according to the education goals of the instructor and the learning capabilities of the students.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.130-136
• /
• 2011

This study describes the effect of EGR rate on the combustion and emissions characteristics of a four cylinder CRDI diesel engine using biodiesel (soybean oil) blended diesel fuel. The test fuel is composed of 30% biodiesel and 70% ULSD (ultra low sulfur diesel) by volumetric ratio. The experiment of engine emissions and performance characteristics were performed under the various EGR rates. The experimental results showed that ignition delay was extended, the maximum combustion pressure and heat release gradually were decreased with increasing EGR rate. Comparing biodiesel blended fuel to ULSD, the injection quantity of biodiesel blended fuel was further increased than ULSD. The emission results showed that $NO_x$ emission of biodiesel blended fuel becomes higher according to the increase of EGR rate. However, in the case of biodiesel blended fuel, HC, CO and soot emissions were decreased compared to ULSD.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.945-952
• /
• 2004

Shrink-resist effects and properties of the knitted fabrics from wool/acrylic(W/A) fiber blends were determined to find out an optimal blending ratio keeping the quality properties of wool products. The test fabrics were knitted by a weft knitting machine with all needle knitting structure ($0{\times}0$ rib) under the same knitting conditions with five different types of yarns: $W100\%,\;A100\%$, and W/A blended yarns(70/30, 50/50, 30/70). Shrinkage during repeated washing, electrostatic propensity, thermal resistance and pilling propensity of W/A knits. The shrink resistance was significantly enhanced on repeated washing of W/A knits, especially, over $50\%$ acrylic blended knits. Addition of strong physical force and alkali detergent applied in this washing experiment brought about superior effects with the low shrinkage rate although it was very severe washing conditions for wool fabrics. The results from the washing experiment implies that W/A blend knits can be machine washed at individual households with other ordinary laundry. There was some changes and variation found in thermal resistance, electrostatic propensity, and pilling. W/A 50/50 blended knits did not bring serious changes to other physical properties comparing with original wool, which helps consumers care wool knitted clothes more conveniently.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.113-117
• /
• 2000

The objective of this study is to find the long-age strength property and the compressive strength of age which is used as the specified concrete strength. The W/W ratio (45%, 50%, 55%, 60%) fine aggregate of useful river sand or blended sand(river sane : sea sand=1:1) were chosen as the experimental parameters. the experimental results show that pH(it means the material segregation resistance) & suspension were increased larger, so W/C become larger, and slump flow was increased as W/C increased (except W/C=60%), air-contents were decreased as W/C became increase and all of this results are satisfied with the under of 40%. The compressive strength ( a case use only river sand as fine aggregate) is showed less than the case of blended asnd. Because the unit weight of the blended sand is more heavy than the unit weigh of the river sand. The results of the case which haven been used only river sand, and the case have been used blended sand), both case have considered W/C. So it's possible to use the compressive strength of age 28 day like the case of plain concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.41-49
• /
• 2020

To improve the problem of strength reduction of unary and binary blended non-cement concrete that occur at room temperature, comparative analysis was conducted based on the slump and compressive strength properties of ternary blended non-cement concrete in which cement was replaced with silica fume, fly ash, and blast furnace slag, and the following conclusions were drawn. The ternary blended non-cement concrete showed higher compressive strength than binary binder concrete, and the slump reduction was less when 10% silica fume was mixed. In addition, the appropriate composition ratio range of each by-product was suggested according to slump and compressive strength level based on ternary diagram.

• Advances in concrete construction
• /
• v.11 no.2
• /
• pp.99-109
• /
• 2021

Slag blended concrete is widely used as a mineral admixture in the modern concrete industry. This study shows an optimization process that determines the optimal mixture of air-entrained slag blended concrete considering carbonation durability, frost durability, CO2 emission, and materials cost. First, the aim of optimization is set as total cost, which equals material cost plus CO2 emission cost. The constraints of optimization consist of strength, workability, carbonation durability with climate change, frost durability, range of components and component ratio, and absolute volume. A genetic algorithm is used to determine optimal mixtures considering aim function and various constraints. Second, mixture design examples are shown considering four different cases, namely, mixtures without considering carbonation (Case 1), mixtures considering carbonation (Case 2), mixtures considering carbonation coupled with climate change (Case 3), and mixtures of high strength concrete (Case 4). The results show that the carbonization is the controlling factor of the mixture design of the concrete with ordinary strength (the designed strength is 30MPa). To meet the challenge of climate change, stronger concrete must be used. For high-strength slag blended concrete (design strength is 55MPa), strength is the control factor of mixture design.