• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.30-34
• /
• 2009

A Sand blasting technology has been used to address via and trench processing of glass wafer of optic semiconductor packaging. Manufactured sand blast that is controlled by blast nozzle and servomotor so that 8" wafer processing may be available. 10mm sq test device manufactured by Dry Film Resist (DFR) pattern process on 8" glass wafer of $500{\mu}m's$ thickness. Based on particle pressure and the wafer transfer speed, etch rate, mask erosion, and vertical trench slope have been analyzed. Perfect 500 um tooling has been performed at 0.3 MPa pressure and 100 rpm wafer speed. It is particle pressure that influence in processing depth and the transfer speed did not influence.

• 농업과학연구
• /
• 제6권2호
• /
• pp.97-104
• /
• 1979

새로운 도열병균의 생태형에 대하여 감수성이 높은 수도 통일계 품종 밀양 23호의 도열병의 발생경과와 발생양상에 미치는 시비수준의 영향을 구명하기 위하여 이 연구를 시도하였다. 그 동안에 얻은 연구 결과는 다음과 같다. 대체로 시비수준이 높아짐에 따라 밀양 23호는 도열병에 대하여 감수성이 더욱 높아지며 발병과 시비 수준사이에 밀접한 관계가 인정되었다. 이와 같은 관계는 마디도열병이나 이삭목도열병의 발생보다도 잎도열병 발생에 있어서 더욱 뚜렷하게 나타난다. 시비수준이 낮은 경우에도 마디도열병이냐 목도열병이 상당히 많이 발생하며 시비수준이 높은 경우의 마디 또는 이삭목도열병의 발생과 차이가 크지 않았다. 따라서 시비수준을 조절하므로서 마디 또는 목도열병을 회피시킨다는 것은 불가능할지 모르며 또한 잎도열병의 발생상으로부터 목도열병을 예찰한다는 것도 곤란한 일이라 생각된다.

• 터널과지하공간
• /
• 제20권5호
• /
• pp.325-331
• /
• 2010

이 연구에서는 사암 벤치에 대하여 V형과 경사 V형의 두 가지 기폭 패턴으로 대규모 발파를 실시하였다. 장약량은 비슷하였다. 발파 후 디지털 이미지 프로세싱 방법으로 파쇄석의 파쇄도를 평가하였다. 10 $m^3$ 용량 로우프 쇼벨의 싸이클 시간도 계측하였다. 그 결과는 경사 V형으로 기폭한 경우 파쇄성능이나 굴착기 성과가 더 향상된다는 것을 보여준다. 이 논문에서는 경사 V형 패턴이 V 형 패턴보다 더 나은 성능을 보이는 이유에 대하여 논한다.

• 터널과지하공간
• /
• 제20권3호
• /
• pp.183-193
• /
• 2010

이 논문은 석회석 광산의 발파 중에 일어나는 파쇄도 관련 문제들에 대하여 고찰한 것이다. 먼저 실 규모 발파 시에 발파 결과를 크게 달리 할 수 있는 중요 발파설계변수를 추출하였다. 또 현장에서 간편하게 적용할 수 있는 발파 성과 평가 방법을 제시하였다. 이는 저자들이 시멘트 제조를 위한 석회석 광산에서 다양한 규모로 설계, 시공, 평가 한 경험에 근거한 것이다.

• Advances in Computational Design
• /
• 제5권4호
• /
• pp.417-443
• /
• 2020

Tunnels have been an integral part of human civilization. Due to complexity in its design and structure, the stability of underground structures under extreme loading conditions has utmost importance. Increased terrorism and geo-political conflicts have forced the engineers and researchers to study the response of underground structures, especially tunnels under blast loading. The present study has been carried out to seek the response of tunnel structures under blast load using the finite element technique. The tunnel has been considered in quartzite rock of northern India. The Mohr-Coulomb constitutive model has been adopted for the elastoplastic behaviour of rock. The rock model surrounding the tunnel has dimensions of 30 m x 30 m x 35 m. Both unlined and lined (concrete) tunnel has been studied. Concrete Damage Plasticity model has been considered for the concrete lining. Four different parameters (i.e., tunnel diameter, liners thickness, overburden depth and mass of explosive) have been varied to observe the behaviour under different condition. To carry out blast analysis, Coupled-Eulerian-Lagrangian (CEL) modelling has been adopted for modelling of TNT (Trinitrotoluene) and enclosed air. JWL (Jones-Wilkins-Lee) model has been considered for TNT explosive modelling. The paper concludes that deformations in lined tunnels follow a logarithmic pattern while in unlined tunnels an exponential pattern has been observed. The stability of the tunnel has increased with an increase in overburden depth in both lined and unlined tunnels. Furthermore, the tunnel lining thickness also has a significant effect on the stability of the tunnel, but in smaller diameter tunnel, the increase in tunnel lining thickness has not much significance. The deformations in the rock tunnel have been decreased with an increase in the diameter of the tunnel.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.45-52
• /
• 2008

In order to investigate the initiation and propagation processes of a spherical detonation wave induced by direct initiation, numerical simulations were carried out using two-dimensional compressible Euler equations with an axisymmetric assumption and a one-step reaction model based on Arrhenius kinetics with various levels of ignition energy. By varying the amount of ignition energy, three typical initiation behaviors, which were subcritical, supercritical and critical regimes, were observed. Then, the ignition energy of more than $137.5{\times}10^6$ in non-dimensional value was required for initiating a spherical detonation wave, and the minimum ignition energy(i.e., critical energy) was less than that of the one-dimensional simulation reported by a previous numerical work. When the ignition energy was less than the critical energy, the blast wave generated from an ignition source continued to attenuate due to the separation of the blast wave and a reaction front. Therefore, detonation was not initiated in the subcrtical regime. When the ignition energy was more than the minimum initiation energy, the blast wave developed into a multiheaded detonation wave propagating spherically at CJ velocity, and then a cellular pattern radiated regularly out from the ignition center in the supercritical regime. The influence on ignition energy was observed in the cell width near the ignition center, but the cell width on the fully developed detonation remained constant during the expanding of detonation wave due to the consecutive formation of new triple points, regardless of ignition energy. When the ignition energy was equal to the critical energy, the decoupling of the blast wave and a reaction front appeared, as occurred in the subcrtical regime. After that, the detonation bubble induced by the local explosion behind the blast wave expanded and developed into the multiheaded detonation wave in the critical regime. Although few triple points were observed in the vicinity of the ignition core, the regularly located cellular pattern was generated after the onset of the multiheaded detonation. Then, the average cell width on the fully developed detonation was almost to that in the supercritical regime. These numerical results qualitatively agreed with previous experimental works regarding the initiation and propagation processes.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.607-624
• /
• 2016

Rockburst is becoming more serious in Chinese coal mine. One of the effective methods to control rockburst is blasting. In the paper, we monitored and analyzed the blasting waves at different blast center distances by the Hilbert-Huang transform (HHT) in a coal mine. Results show that with the increase of blast center distance, the main frequency and amplitude of blasting waves show the decreasing trend. The attenuation of blasting waves is slower in the near blast field (10-75 m), compared with the far blast field (75-230 m). Besides, the frequency superposition phenomenon aggravates in the far field. A majority of the blasting waves energy at different blast center distances is concentrated around the IMF components 1-3. The instantaneous energy peak shows attenuation trend with the blast center distance increase, there are two obvious energy peaks in the near blast field (10-75 m), the energy spectrum appears "fat", and the total energy is greater. By contrast, there is only an energy peak in the far blast field, the energy spectrum is "thin", and the total energy is lesser. The HHT three dimensional spectrum shows that the wave energy accumulates in the time and frequency with the increasing of blast center distance.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.113-118
• /
• 2011

서열 상동성 분석은 생명현상에 관여하는 물질을 정렬, 색인하여 데이터베이스 하는 것으로, 생명정보학의 유용성을 입증하는 분야이다. 본 논문에서는 구조가 복잡한 진핵생물의 서열 패턴을 단백질 서열로 변환하기 위해 은닉마르코프모델을 이용하는 GenScan 프로그램을 이용한다. 서열상동성 분석 중 최소거리 탐색 문제는 문제의 크기가 커지면 계산량이 기하급수적으로 증가하여 정확한 계산이 불가능해진다. 따라서 유사한 아미노산간의 치환과 상이한 아미노산간의 치환 점수를 차등화한 점수표를 적용하고, 은닉마르코프모델 등을 적용해 정교한 전이 확률모델을 적용한다. 변환된 서열을 서열 상동성 분석을 위해 사용되는 blast p를 이용하여, 은닉 마르코프 모델을 도입함으로 인해 단백질 구조 서열로 변환하는 데에 있어서 우수한 기능을 제공함을 알 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.209-216
• /
• 1999

In tunneling and road cuts by blasting, it is of the utmost importance that the remaining rock is of high quality in order to avoid rockfall, rockslides and excessive maintenance work. Therefore, numerous blasting techniques which make use of decoupled charge or shock wave superposition effect have been used to control overbrake. In this paper. some approximate method for the determination of blast load according to the charge condition was introduced at first and, instrumented tests were conducted in small scale transparent material to investigate the shape and amplitude of blast load around the bore hole. Compare to the fully coupled charge, low amplitude of blast load around the bore hole was observed in the decoupled charge and explosion gas pressure was important in the shape of blast load. Therefore, quasi-static behaviour of the crack pattern was shown due to low loading rate.

• 한국기후변화학회지
• /
• 제9권2호
• /
• pp.133-142
• /
• 2018

Climate change will affect not only the crop productivity but also the pattern of rice disease epidemics in Korea. Impact assessments for the climate change are conducted using various climate change scenarios from many global climate models (GCM), such as a scenario from a best GCM or scenarios from multiple GCMs, or a combination of both. Here, we evaluated the feasibility of using a climate change scenario from the best GCM for the impact assessment on the potential epidemics of a rice leaf blast disease in Korea, in comparison to a multi?model ensemble (MME) scenario from multiple GCMs. For this, this study involves analyses of disease simulation using an epidemiological model, EPIRICE?LB, which was validated for Korean rice paddy fields. We then assessed likely changes in disease epidemics using the best GCM selected for individual agro?climatic zones and MME scenarios constructed by running 11 GCMs. As a result, the simulated incidence of leaf blast epidemics gradually decreased over the future periods both from the best GCM and MME. The results from this study emphasized that the best GCM selection approach resulted in comparable performance to the MME approach for the climate change impact assessment on rice leaf blast epidemic in Korea.