• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.60-66
• /
• 1998

The hot stove system is a process that is continuously and constantly generating the hot combustion air required for the blast furnace. The hot stove process is considered as a main energy consumption process because it consumes about $20\%$ of the total energy in steel making works. So, many researchers have interested in the improvement of the heat efficiency of the hot stove to reduce the energy consumption. But they have difficulties in improving the heat efficiency of the hot stove because there is no precise information on heat transformation occurring during the heating period. In order to model the relationship between the operating conditions and heat efficiencies, we propose a neural network using feature extraction as one of experimental modeling methods. In order to show the performance of the model, we compare it with Partial Least Square (PLS) method. Both methods have similarities in using the dimension reduction technique. And then we present the simulation results on the prediction of the heat efficiency of the hot stove.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2015

In this study, a blast furnace slag with the alkaliphilic microorganism (Bacillus halodurans) alkaline activator was used to cement natural soils in the field. A low-cost and massive microbial solution for cementation of field soils was produced and compared with existing microbial culture in terms of efficiency. A field soil was prepared for three different cementation areas: a cemented ground with microbial alkaline activator (Microbially-treated soil), a cemented ground with ordinary Portland cement (Cement-treated soil), and untreated ground (Non-treated soil). The testing ground was prepared at a size of 2.6 m in width, 4 m in length, and 0.2 m in depth. After 28 days, a series of unconfined compression tests on the cement-treated and microbially-treated soils were carried out. On the other hand, a torvane test was carried out for non-treated soil. The strength of field soils treated with microorganism was 1/5 times lower than those of cement-treated soil but is 6 times higher than non-treated soil. The pH measured from microbially-treated soil was about 10, which is lower than that of cement-treated soil (pH = 11). Therefore, it is more eco-friendly than Portland cemented soils. The C-S-H hydrates were found in both cement- and microbially-treated soils through SEM-EDS analyses and cement hydrates were also found around soil particles through SEM analysis.

• Journal of the Korea Concrete Institute
• /
• v.27 no.1
• /
• pp.65-73
• /
• 2015

This study discussed the pozzolanic properties of calcined sewage sludge (CSS) according to calcination and fineness conditions. The chemical and mineralogical analysis of CSS according to calcination temperature and time were carried out and compared with that of the existing pozzolanic materials such as fly-ash, blast furnance slag and meta-kaolin. Various mortars were made by mixing those CSS and $Ca(OH)_2$ (1:1 wt. %), and their compressive strength and hydrates according to experimental factors such as fineness of CSS and curing age were also investigated in detail. The results show clearly the potentiality of calcined sewage sludge (CSS) as an admixture materials in concrete, but the CSS should be controlled by calcination temperature and time, and fineness etc. In this experimental condition, the calcination temperature of $800^{\circ}C$, calcination time of 2 hours and fineness of $5,000cm^2/g$ were optimum conditions in consideration of the mechanical properties and economic efficiency of CSS. The compressive strength of CSS mortars was higher than that of fly-ash mortars and blast furnace slag mortars, especially at the early ages. Then, the utilization of CSS in construction fields was greatly expected.

• Journal of Life Science
• /
• v.13 no.5
• /
• pp.723-731
• /
• 2003

For the investigation of conserved regions in lipase genes, 132 and 24 sequences were obtained from LED (Lipase Engineering Database) and COG (Clusters of Orthologous Groups of proteins), respectively. There was high diversity in lipase genes and peculiar amino acid sequences were conserved for each homologous family of LED. Similar conserved amino acid sequences were detected from COG0657 and Moraxella lipase 1 homologous group of LED. Although many studies have attempted to detect new lipase genes in procaryotes, they have been limited culturable bacteria. The importance of metagenome, including DNA from non-culturable bacteria, is known. Due to the high diversity, we assumed it might be possible to detect new lipase gene from metagenome. Due to the high diversity of nucleotide sequences in lipase genes, 10 primer sets were designed. Designed primer sets were inspected in BLAST of NCBI and they could amplify a part of the lipase gene from 222 to 713 bp. They can amplify 16.7%∼60.0% of each lipase homologous group which was 3.6 fold higher than each sets. They might offer a high probability of detecting new lipase genes, owing to high efficiency and the diversity of lipase genes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.76-83
• /
• 2012

In this study, the research examined the effect on FC, WG, RP replacement ratio on the quality improvement of BS mortar using the RA. First of all, the flow value increased as the FC contents increased, and decreased as the WG and RP contents increased. The air contents was reduced as the FC and RP contents increased, but was increased as the WG contents went up While the compressive strength of 1 : 7 mix proportion increased with the increase of the FC and WG contents, it decreased as there was more RP contents. The compressive strength of RP could increase as the mix proportion increased, but the difference depending on the improvement material type and replacement ratio decreased gradually. The absorption deteriorated as the FC and RP contents increased in all the mix proportions, but improved a little when WG was used. Meanwhile, the absorption decreased as the compressive strength improved in all the mix proportions as a correlation, but the order was FC, RP and WG depending on the quality improvement material types. The FC and WG were most favorable in terms of quality improvement as a total analysis, and the RP and WG was most effective in terms of economical efficiency and resource recycling.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.45-54
• /
• 2016

In this study, the construction method of new underground continuos impervious wall that the bentonite slurry keeps the stability of excavated trench and the mixture of cement and bentonite plays a role as a constituent of impervious wall in the trench. The merit of homogeneity of the method so called as a cement-bentonite slurry wall enables to accurately make an estimation of hydraulic conductivity of the walls compared with that by other general grouting methods and to verify their waterproof efficiency without difficulty at the design stage. The use of cement-bentonite slurry walls for the containment of groundwater flow has also proven a cost-effective impervious wall technology by employing the simple combination of construction equipments and easy and fast construction procedures. The engineering characteristics of cement-bentonite impervious wall obtained by carrying out the laboratory experiments under various conditions. This study reveals the effect of variation of constituent materials and their mixing methods (Water-Cement-Bentonite) on the engineering characteristics of a composition. Also, this study makes some recommendations on the optimum mixing ratio and mixing sequence for the best quality at the site. That is the most important factors to estimate the construction cost and design of the technique. The comparison is lastly made to evaluate the effect of ordinary Portland and blast furnace slag cement as a bonding material on the behavior of impervious walls.

• Development and Reproduction
• /
• v.9 no.2
• /
• pp.105-114
• /
• 2005

Embryonic stem(ES) cells have tremendous potential as a cell source for cell-based therapies. Realization of that potential will depend on our ability to understand and manipulate the factors that influence cell fate decision and to develop methods for getting enough cell numbers for clinical applications. Hematopoiesis has been widely studied, and hematopoietic differentiation from ES cells is a good model to study lineage commitment. In this study, we investigated stemness and compared the efficiency of hematopoietic differentiation using two different mouse embryonic stem cell lines TC-1 and B6-1. Although the two cell lines showed known stem cell properties with minor differences, the embryoid body formation efficiency in methylcellulose was much higher in TC-1 than B6-1. When measured potentials of hematopoietic differentiation using functional(colony-forming cell) and phenotypic(specific marker expression) assays, we found that TC-1 can differentiate into hematopoietic cells in methylcellulose culture but B6-1 cannot. These results imply that we can improve the efficiency of hematopoietic cell differentiation by selection of proper cell lines and this may be also applied in the differentiation of human embryonic stem cells.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.154-154
• /
• 2017

In accordance with the opening of the Korean rice market, this study was focused on establishment of database for discriminating the Korean rice varieties and imported brand rices using DNA markers. In this study, the SNP markers were developed using single nucleotide polymorphisms between the reference sequences of japonica and them of 40 brand rices which collected in Australia, China, Thailand, United States and Vietnam. The developed SNP markers were screened to a total of 360 rices including 320 Korean rice varieties and 40 imported brand rices. We selected polymorphic markers among Korean bred rive varieties and imported brand rices. The selected markers were classified into 3 grades. The markers of A grade produced DNA band in 360 rices of 30~40%, B grades produced in 40~60%, and C grades produced bands over 60% rices. First, we tried to set-up the discriminating system using the minimum SNP markers of A grade. Especially, a set of sixteen SNP markers could identify among Korean bred rice varieties and imported brand rices. Additionally, some SNP markers like NSb for Pib gene, JJ80-T for Pi5 and YL155/YL87 for Pita which linked to resistance genes to blast were used to fingerprinting system. These markers were set-up as multiplex set for enhancing the identification efficiency among rice varieties. Finally, the selected SNP markers would be used to the fluidigm assay to construct the database for elaborate discrimination of rice varieties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.474-479
• /
• 2016

As the Eco-energy is recently required, electrical energy is fast increased. Several induction heating methods are attractive for Eco-energy and energy saving. In this paper, electrical fan heater was designed and developed with new concept for energy saving by electromagnetic induction heating. Proposed system was composed of three module, blast part, induction heating part and power transformation part. Induction heating method was adapted for heating and the resonant inverter was used for increasing of the power transformation efficiency. Full-bridge resonant inverter was adopted to resonant inverter. This system was composed of induction heating part made with metal(SUS 40 series), and power transformation part made with rectifier module, filter module and resonant inverter. From these results, the proposed new electric heater could be saved the energy from faster increasing the temperature compared to commercial gas and other electric heater. This electrical fan heater is possible to be used in field of home, commercial and agricultural area for eco-energy saving heater.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.199-207
• /
• 2003

In the combat environments at the sea, the naval ships should have enough structural integrity to perform the task under the enemy's attack and possible damages. Although the naval ships can be damaged from the enemy's attack, those damages should be minimized and the naval ships must maintain their combat capabilities continuously after recoveries from the damages. Therefore, it is ve교 important for modem naval ships, especially combat naval ships, to ensure the survivability. This paper reviewed the developing procedure for the technique of the naval ships structures and described method, especially box girder system considering survivability. The efficiency of box girder is examined by numerical simulation, and it is found that the establishment of box girder is a good design method to improve the survivability.