• 제목/요약/키워드: Blast efficiency

검색결과 131건 처리시간 0.035초

슬래그 엔지니어링에 의한 製銃 및 제강조업의 효율향상에 관한 연구 (Development of Iron and Steelmaking Processes by Slag Engineering Technology)

  • 박주현;민동준;송효석
    • 자원리싸이클링
    • /
    • 제10권3호
    • /
    • pp.37-42
    • /
    • 2001
  • 21세기 철강산업에 요구되는 경제성, 환경친화성, 고효율성을 동시에 만족하는 슬래그 정련조업 조건을 슬래그 엔지니어링 개념에 입각하여 평가하였다. 제선 공정의 경우, 기존의 슬래그 조성에서 염기도를 증가시킴으로써 우수한 로내 통액성 및 향상된 용선품질 확보가 가능할 것으로 평가되었으며, COREX 조업에서는 ($SiO_2$+ $A1_2$$O_3$) 농도를 소량 감소시킴으로써 보다 우수한 유동성 및 정련능 확보가 가능한 것으로 예측되었다. 한편, Stainless Steel-AOD공정의 경우, 소량의 CaO농도 증가를 통하여 현재보다 양호한 정련능 확보가 가능함을 알 수 있었으며, 슬래그 중 (CaO+$A1_2$$O_3$)농도 증가를 통해 $CaF_2$의 사용량 감소를 이룩할 수 있을 것으로 예측되었다.

  • PDF

자극제를 사용한 플라이애쉬 콘크리트의 물리적 특성에 관한 연구 (The Study of Physical Properties of Fly Ash Concrete Using Activator)

  • 박종호;김정빈;원은미;박봉순;이정아;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.565-568
    • /
    • 2008
  • 플라이애쉬는 상대적으로 낮은 초기 강도 발현율에 의해서 고로슬래그 미분말에 비하여 사용이제한적이다. 따라서 플라이애쉬는 우수한 경제성과 많은 발생량에도 불구하고 많은 양이 활용되지 못하고 매립되고 있다.본 연구에서는 자극제가 플라이애쉬를 사용한 콘크리트의 성능에 미치는 영향을 확인하고 플라이애쉬의 활용 증대 가능성을 검토하였다. 연구 결과 자극제를 사용한 플라이애쉬 콘크리트가 동일 슬럼프, 공기량 및 로스를 가지면서 일반적인 혼화제를 사용한 콘크리트보다 압축강도가 높게 나타났으며 다양한 요인에서의 자극제의 성능 발현을 검증할 경우 자극제를 사용한 플라이애쉬 콘크리트의 현장 적용 확대가 가능할 것으로 사료된다.

  • PDF

인접구조물 하부통과에 따른 굴착공법에 대한 고찰 (A Study on Excavation Method According to Passage under Adjacent Structure)

  • 김태현;고진석;조영동
    • 화약ㆍ발파
    • /
    • 제23권1호
    • /
    • pp.31-39
    • /
    • 2005
  • 본 연구는 중앙선(덕소-원주간) 복선전철 터널공사론 기초로 한 것으로 주변 보안물건에 대한 피해가 발생되지 않도록 시험발파를 통한 발파 환경 영향권 분석을 실시하고, 그 결과를 상호 비교, 분석하여 안전하고 효율적인 공사가 수행될 수 있도록 적합한 대체 굴착공법의 적용에 대하여 연구하였다. 시험발파를 통해 제시된 대체굴착공법을 이용하여 더 안전하고 효과적인 작업을 수행한 수 있었으며, 무진동 구간은 일반적으로 2차 작업이 병행되므로 breaker 작업에 의한 진동이 지속적으로 발생되어 연구지역의 경우 적용이 사실상 어렵다고 판단됨에 따라 선대구경 수평보링 공법+라인드릴링 공법+다분할 미진동 소발파 공법을 적용함으로써 발파진동 기준치 이내의 수준으로 굴착작업이 가능하였다.

On the origin of Na-O anticorrelation in globular clusters

  • Kim, Jaeyeon;Lee, Young-Wook
    • 천문학회보
    • /
    • 제42권1호
    • /
    • pp.49.1-49.1
    • /
    • 2017
  • In order to investigate the origin of multiple stellar populations in the halo and bulge of the Milky Way, we have constructed chemical evolution models for the low-mass proto-Galactic subsystems such as globular clusters (GCs). Unlike previous studies, we assume that supernova blast waves undergo blowout without expelling the pre-enriched gas, while relatively slow winds of massive stars, together with the winds and ejecta from low and intermediate mass asymptotic giant branch stars, are all locally retained in these less massive systems. We first applied these models to investigate the origin of super-helium-rich red clump stars in the metal-rich bulge as recently suggested by Lee et al. (2015). We find that chemical enrichments by the winds of massive stars can naturally reproduce the required helium enhancement (dY/dZ = 6) for the second generation stars. Disruption of these "building blocks" in a hierarchical merging paradigm would have provided helium enhanced stars to the bulge field. Interestingly, we also find that the observed Na-O anticorrelation in metal-poor GCs can be reproduced, when multiple episodes of starbursts are allowed to continue in these subsystems. Specific star formation history with decreasing time intervals between the stellar generations, however, is required to obtain this result, as would be expected from the orbital evolution of these subsystems in a proto-Galaxy. The "mass budget problem" is also much alleviated by our models without ad-hoc assumptions on star formation efficiency and initial mass function.

  • PDF

New insights on the origin of multiple stellar populations in globular clusters

  • 김재연;이영욱
    • 천문학회보
    • /
    • 제43권1호
    • /
    • pp.46.1-46.1
    • /
    • 2018
  • In order to investigate the origin of multiple stellar populations in the halo and bulge of the Milky Way, we have constructed chemical evolution models for the low-mass proto-Galactic subsystems such as globular clusters. Unlike previous studies, we assume that supernova blast waves undergo blowout without expelling the pre-enriched gas, while relatively slow winds of massive stars, together with the winds and ejecta from low and intermediate mass asymptotic-giant-branch stars, are all locally retained in these less massive systems. We find that the observed Na-O anti-correlations in metal-poor GCs can be reproduced when multiple episodes of starbursts are allowed to continue in these subsystems. A specific form of star formation history with decreasing time intervals between the stellar generations, however, is required to obtain this result, which is in good agreement with the parameters obtained from our stellar evolution models for the horizontal-branch. The "mass budget problem" is also much alleviated by our models without ad-hoc assumptions on star formation efficiency and initial mass function. We also applied these models to investigate the origin of super helium-rich red clump stars in the metal-rich bulge as recently suggested by Lee et al. (2015). We find that chemical enrichments by the winds of massive stars can naturally reproduce the required helium enhancement (dY/dZ = 6) for the second-generation stars. Disruption of proto-globular clusters in a hierarchical merging paradigm would have provided helium enhanced stars to the bulge field.

  • PDF

과수방제기 살포입자의 도포율 분포특성 (Coverage Distribution of Blasted Droplets by an Orchard Sprayer)

  • 구영모;김상헌;신범수
    • Journal of Biosystems Engineering
    • /
    • 제26권4호
    • /
    • pp.355-362
    • /
    • 2001
  • Uniform application of agri-chemicals will improve orchard pest management. An air-blast(orchard) sprayer designed for vineyards has been used: however, few research on the uniformity and coverage of the sprays has been reported. Distributions of spray coverage were measured with artificial targets and analyzed to enhance the efficiency of spray application. A structure was built to place water sensitive papers, sampling spray droplets blasted from the orchard sprayer. The sampling cards were collected from five directions at three distances (2.5, 3.0 and 3.5m) for two fan speeds (2,075 and 3,031 rpm), and analyzed using an image analysis system. The distribution of the coverage percent area did not follow the wind velocity pattern. The coverage by the low fan speed was more uniform and higher than that by the higher fan speed. The coverage percent area decreased with an increase of distance. The distribution of droplet density was similar to that of coverage. However, the coverage contribution by smaller droplets became more significant as the distance increased. The upward blasting distance was limited within 3m, but the limit to the ground level was expanded the distance more than 3.5m because of the concentrated droplets.

  • PDF

CDMA 하향링크의 간섭제거를 위한 새로운 다계층 신경망의 복잡도 개선에 관한 연구 (Simplified Multilayer Perceptron for Interference Cancellation of CDMA Forward Link)

  • 이봉희;김종민;이상규;한영수;황인관
    • 한국통신학회논문지
    • /
    • 제28권3C호
    • /
    • pp.271-278
    • /
    • 2003
  • 본 논문에서는 CDMA 하향링크에서 최적화가 용이한 새로운 다층 신경망을 제안하고 이를 적용한 신경망 수신기를 레이크 수신기와 비교하여 CDMA 하향링크에서 간섭이 제거되어 성능이 개선되었음을 입증하였다. 새로운 다층신경망은 기존의 다층신경망에 비해 시스템 복잡도가 개선되고 최적화가 용이하면서 기존의 다층신경망과 동일한 간섭제거에 의한 성능 향상 효과를 얻을 수 있어 실제 시스템에 적용하기에 적합하다. CDMA 하향링크에서 요구되는 고속의 데이터 전송을 위해 BLAST를 시작으로 STS, STTC, STC 등 다양한 STD 기술들이 제시되었으나 타사용자의 정보부재로 다중사용자 검파가 불가하고 충분한 수의 안테나를 장착할 수 없는 하향링크의 한계로 실질적으로 채널효율증대 효과가 미흡한 실정이다. [10]-[15]이러한 문제점을 해결하기 위하여 복잡한 채널환경에 대해 적응능력이 뛰어나고, 고속의 병렬처리의 장점을 갖으며, 실시간 구현이 용이한 최적화된 단계층 신경망을 이용해서 다중사용자 간섭을 제거하였다. 여기에 STC 기술들을 접목시킨다면 CDMA 단말기의 획기적인 채널효율증대 가능성을 기대할 수 있을 것이다.

인공절리에 의한 암석의 파쇄도 평가 (Evaluation of Rock Fragmentation due to Artificial Joint Effect)

  • 노유송;석철기;박훈
    • 화약ㆍ발파
    • /
    • 제36권4호
    • /
    • pp.9-15
    • /
    • 2018
  • 발파에 의한 암석의 파쇄도는 적재, 운반과 2차 파쇄로 이어지는 후속공정에 직접적인 영향을 미치므로 파쇄도의 조절은 발파 효율성과 생산비용을 평가하는데 필수적이다. 본 연구에서는 인공절리의 방향에 따른 암석의 파쇄도에 대해 분석하였다. 갱내 암반에 수직 및 수평인공절리를 생성한 후 발파실험을 수행하였다. 생성된 암석파쇄물의 입도분포는 2차원 영상해석 프로그램인 split-desktop으로 평가하였다. 평가결과 수평인공절리가 수직인공절리에 비해 전체적인 암석파쇄물의 크기가 작게 평가되었고, 다양한 크기로 암석파쇄물이 분포하였다. 인공절리의 방향에 따라 대괴발생을 억제하고 암석파쇄물을 일정한 크기 이하로 조절 할 수 있을 것으로 판단된다.

Metaheuristic-reinforced neural network for predicting the compressive strength of concrete

  • Hu, Pan;Moradi, Zohre;Ali, H. Elhosiny;Foong, Loke Kok
    • Smart Structures and Systems
    • /
    • 제30권2호
    • /
    • pp.195-207
    • /
    • 2022
  • Computational drawbacks associated with regular predictive models have motivated engineers to use hybrid techniques in dealing with complex engineering tasks like simulating the compressive strength of concrete (CSC). This study evaluates the efficiency of tree potential metaheuristic schemes, namely shuffled complex evolution (SCE), multi-verse optimizer (MVO), and beetle antennae search (BAS) for optimizing the performance of a multi-layer perceptron (MLP) system. The models are fed by the information of 1030 concrete specimens (where the amount of cement, blast furnace slag (BFS), fly ash (FA1), water, superplasticizer (SP), coarse aggregate (CA), and fine aggregate (FA2) are taken as independent factors). The results of the ensembles are compared to unreinforced MLP to examine improvements resulted from the incorporation of the SCE, MVO, and BAS. It was shown that these algorithms can considerably enhance the training and prediction accuracy of the MLP. Overall, the proposed models are capable of presenting an early, inexpensive, and reliable prediction of the CSC. Due to the higher accuracy of the BAS-based model, a predictive formula is extracted from this algorithm.

포강 내 압력을 고려한 효율적 포신 설계 (Efficient Design of Gun-Tube Considering Inner Pressure of Bore)

  • 김의빈;김규빈;박은교;오석환;노태성;조진연
    • 한국군사과학기술학회지
    • /
    • 제26권5호
    • /
    • pp.371-383
    • /
    • 2023
  • Artillery gun tube experiences very high pressure according to the blast of propellant charge. Therfore, it is essential to guarantee the structural safety of the gun tube. On the other hand, weight reduction of gun tube is also a crucial design factor since the agility of artillery vehicle directly leads to its survivability. In this line of thought, this work proposed an efficient design procedure which utilizes the convex combination of breech pressure and projectile base pressure time histories. Its efficiency is verified by comparing with other procedures. Other procedures utilize different computed max pressure rather than the convex combination design pressure. Additionally, a transient analysis is carried out considering the projectile movement and the corresponding pressure distribution through the newly developed ABAQUS user-subroutine. The analysis confirms the structural safety of the lightweight gun tube designed by the proposed method.