• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.59-66
• /
• 2006

We studied on the effects of the enzyme treatment of pulp fiber on physical properties of coated paper were elucidated using four types of enzymes. The results of this study showed that the blank in which enzyme was not treated showed the highest $St{\ddot{o}}ckigt$ and Hurcules sizing degrees. And when the enzyme treated base paper was used for coating, the coated paper has average 5.7 % higher gloss and whiteness than when untreated base paper was used. Brightness showed 0.12 % higher results with the enzyme treated base papers than the blank while it is considered to show similar trends. Whiteness of coated paper was not influenced by the enzyme treatments but by the properties of coating color. Coated paper whose base paper was enzyme treated showed improved roughness while smoothness of those samples except the ${\beta}$-Glucosidase treated one was relatively low due to the high fines content. Also the coated paper whose base paper was not enzyme treated showed high porosity.

• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.604-612
• /
• 2017

An effective and precise method using a scanning white-light interferometer (SWLI) for three-dimensional surface measurements, in particular for roughness measurements, has been proposed. The measurement of a microscopically sloped area using an interferometer has limitations, due to the numerical aperture of the lens. In particular, for roughness measurements, it is challenging to obtain accurate height data for a sloped area using the interferometer, due to diffraction of the light. Owing to these optical limitations of the interferometer for roughness measurements, the Ra measurements performed using an interferometer contain errors. To overcome the limitations, we propose a method consisting of the following two steps. First, we evaluate the height data and set the invalid height area to be blank, using the characteristics of the modulus peak, which has a low peak value for signals that have low reliability in the interferogram. Next, we interpolate the blank area using the adjacent reliable area. Rubert roughness standards are used to verify the proposed method. The results obtained by the proposed method are compared to those obtained with a stylus profilometer. For the considered sinusoidal samples, Ra ranges from $0.053{\mu}m$ to $6.303{\mu}m$, and we show that the interpolation method is effective. In addition, the method can be applied to a random surface where Ra ranges from $0.011{\mu}m$ to $0.164{\mu}m$. We show that the roughness results obtained using the proposed method agree well with profilometer results. The $R^2$ values for both sinusoidal and random samples are greater than 0.995.

• 분석과학
• /
• 제32권3호
• /
• pp.88-95
• /
• 2019

This study was conducted to establish the analytical method for the determination of cyanide in blood, urine, lung and skin tissues in rats. In order to detect or quantify the sodium cyanide in above biological matrixes, it was derivatized to Pentafluorobenzyl cyanide (PFB-CN) using pentafluorobenzyl bromide (PFB-Br) and then reaction substance was analyzed using gas chromatography mass spectrometer (GC/MS)-SIM (selected ion monitoring) mode. The analytical method for cyanide determination was validated with respect to parameters such as selectivity, system suitability, linearity, accuracy and precision. No interference peak was observed for the determination of cyanide in blank samples, zero samples and lower limit of quantification (LLOQ) samples. The lowest limit detection (LOD) for cyanide was $10{\mu}M$. The linear dynamic range was from 10 to $200{\mu}M$ for cyanide with correlation coefficients higher than 0.99. For quality control samples at four different concentrations including LLOQ that were analyzed in quintuplicate, on six separate occasions, the accuracy and precision range from -14.1 % to 14.5% and 2.7 % to 18.3 %, respectively. The GC/MS-based method of analysis established in this study could be applied to the toxicokinetic study of cyanide on biological matrix substrates such as blood, urine, lung and skin tissues.

• 한국식품위생안전성학회지
• /
• 제12권2호
• /
• pp.117-124
• /
• 1997

A simple, rapid and simultaneous analytical method is described for the detection of Sulfonamide and Tetracycline residues, i.e., Sulfamerazine (SMR), Sulfamethazine (SMT), Sulfamonomethoxine (SMM), Sulfadimethoxine (SDM), Sulfaquinoxaline (SQN), Oxytetracycline (OXY), Tetracycline (TC), Chlortetracycline (CTC). Blank control and sulfonamide and tetracycline fortified fish muscle samples (0.5 f) were blended with octadecylsilyl (C18, 40 ${\mu}{\textrm}{m}$, 21% load, 60$\AA$) derivatized silica packing material (2 g). Blended fish samples were washed with hexane, then, benzene and dichloromethace were used for the elution of tetracycline and sulfonamide were analyzed by HPLC. Correlation coefficients of standard curves for individual sulfonamide and tetracycline isolated from fortified samples were linear (0.9993$\pm$0.0003~0.9997$\pm$0.0003, 0.9493$\pm$0.078~0.9753$\pm$0.036), respectively. The average percentage recoveries of sulfonamide and tetracycline ranged as 80.86~96.52% to 85.88~92.23%, and 30.01~37.12% to 65.89~73.40%, for the concentration range (0.1~1.0 ppm) examined, respectively. Limit of detection for sulfonamide was 0.0012 ppm for SMR in Paralichthys Olivacleus and 0.0020 ppm for SMR, 0.015 ppm for SMM in Cyprinus Carpio. The applicability of this procedure is demonstrated by separation and detection of incurred tetracycline and sulfonamide residues in fish muscle tissue.

• Bulletin of the Korean Chemical Society
• /
• 제28권3호
• /
• pp.369-372
• /
• 2007

A fast and simple high-performance liquid chromatography (HPLC) method for the simultaneous determination of four pesticides having fungicide properties has been proposed for Panax ginseng, C. A. Meyer grown for 4, 5, or 6 years. Analytical separation was performed on C18 columns using ultraviolet detector under gradient conditions. Spiked blank samples were used as standards to counteract the matrix effect observed in the chromatographic determination. The HPLC response for all pesticides was linear, with determination coefficients > 0.9986. The average rate of recovery for pesticides spiked with 2 fortification levels was > 72% with relative standard deviations < 9%. The limits of quantification (LOQ) ranged from 0.03 to 0.16 ppm. These LOQs were lower than the respective maximum residue limits (MRL) established by the Korean Food and Drug Administration (KFDA), except for cyazofamid. The proposed method was used to determine pesticide residue levels in samples of ginseng obtained from Jeonnam Province (Republic of Korea). None of the pesticides were found in ginseng samples grown for 4, 5, or 6 years.

• 한국임상약학회지
• /
• 제6권2호
• /
• pp.28-31
• /
• 1996

The in vitro inactivation of gentamicin and tobramycin by four cephalosporins (cefotetan, cefuroxime, cefodizime, cefotiam) in human serum was investigated. Each cephalosporin was added to human serum samples containing gentamicin sulfate or tobramycin sulfate. Blank samples containing only aminoglycosides were used as controls. Samples were stored at -20, 4 and $25^{\circ}C$ and were analyzed for aminoglycoside concentrations by fluorescence polarization immunoassay ($TDxFLx^{TM}$ system) at 0, 2, 4, 8, 12, 24, 48 and 72 hours after mixing. The serum containing cefotiam stored at $25^{\circ}C$ showed significant inactivation of gentamicin by $12\%$ at 72 hours. The results indicate that cefotitan, cefuroxime and cefodizime do not inactivate gentamicin and tobramycin while cefotiam inactivates gentamicin.

• 분석과학
• /
• 제31권4호
• /
• pp.171-178
• /
• 2018

Recently, for successful lactation, many breastfeeding mothers seek various products, including herbal medicine, dietary supplements, and prescribed medicines, to improve milk production. As demand for galactogogues grows, it is highly possible that pharmaceutical galactogogues may be adulterated with illegal products to maximize their efficacy. For continuous control and supervision of illegal products, we developed and validated a simple and sensitive LC-MS/MS method capable of simultaneously determining five galactogogues. Chromatographic separation was conducted using an Agilent Poroshell $120SB-C_{18}$ column with a mobile phase consisting of 20 mM ammonium formate (pH 5.4) and 100 % acetonitrile. The total run time was 13 min per analyte. The proposed method was performed according to the guidelines of the International Conference of Harmonization and it produced reliable results. This method showed high sensitivity and specificity, with a limit of detection (LOD) and limit of quantitation (LOQ) of 0.01-0.82 ng/mL and 0.02-2.45 ng/mL, respectively, for the solid- and liquid-type samples. Specificity was evaluated by analyzing matrix-blank samples spiked with the target compounds at LOQ levels, which provided a good separation of all peaks without interference. Additionally, the repeatability and intermediate precision were typically <15 %, whereas the recovery was 80-120 % of the values obtained using blank samples. Thus, we concluded that this method could be used for the identification and quantification of galactogogues in food or herbal products.

• Asian Journal of Atmospheric Environment
• /
• 제11권1호
• /
• pp.54-60
• /
• 2017

Quantifying the trace elements in infinitesimal ambient liquid samples (e.g., single raindrop, cloud/fog water, and the soluble fraction extracted from the particles collected for a short time) is an important task for understanding formation processes, heating/cooling rates, and their health hazards. The purpose of this study is to employ an in-air micro PIXE system for quantitative analysis of the trace elements in a thimbleful of reference liquid sample. The bag type liquid sample holder originally designed with $10{\mu}m$ thick $Mylar^{(R)}$ film retained the original shape without any film perforation and apparent peaks of film blank by the end of the analysis. As one of tasks to be solved, the homogeneity of the elemental distribution in liquid reference species was verified by the X-ray line profiles for several references. It was possible to resolve the significant peaks for whole target elements corresponding to the channel number of micro-PIXE spectrum. The calibration curves for the six target elements (Si, S, Cl, Fe, Ni, and Zn) in standard solutions were successfully plotted by concentration (ppm) and ROI of interest net counts/dose (nC).

• 한국축산식품학회지
• /
• 제39권6호
• /
• pp.888-902
• /
• 2019

Our aim was to investigate the effects of bromelain embedded in double emulsion (DE) on physicochemical properties of pork loin. We evaluated DE characteristics such as size, zeta potential, and microscopy after fabrication. We marinated meat with distilled water (DW), 1% (w/v) bromelain solution, blank DE, and 1% (w/v) bromelain loaded in double emulsion (DE E) for 0, 24, 48, and 72 h at 4℃, and prepared raw meat for control. The marinated samples were assessed for color, water holding capacity, cooking loss, moisture content, pH, protein solubility, Warner-Bratzler shear force (WBSF) and gel electrophoresis. The droplet size of 1% (w/v) bromelain embedded in DE was increased compared with blank DE (p<0.05) and values of zeta potential decreased. The increase in lightness and color difference range of the DE-treated group was lower than that of the DW-treated group (p<0.05). Moreover, treatment by immersion in 1% (w/v) DE E resulted in the highest water holding capacity values (p<0.05) and lower cooking loss values than water base treatment (p<0.05). Results for myofibrillar protein solubility and WBSF showed a similar trend. 1% (w/v) DE E showed degradation of myosin heavy chain after 48 h in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Thus, bromelain-loaded DE is useful for controlling and handling enzyme activity in food industry.

• BMB Reports
• /
• 제36권4호
• /
• pp.417-420
• /
• 2003

The present work describes a colorimetric microplate assay for lipase activity based on the reaction between 5,5'-dithiobis(2-nitro benzoic acid) (DTNB) and the hydrolysis product of 2,3-dimercapto-1-propanol tributyrate (DMPTB). Reaction mixtures containing DTNB, DMPTB, and lipase were prepared in microplate wells, and the absorbance at 405nm was recorded after incubation at $37^{\circ}C$ for 30 min. A linear relationship was obtained in the range of 0.1-1 U of lipase activity by this method. The reaction conditions were also optimized for the range of 0.01-0.1 U or 1-10 U. When assaying crude tissue extracts, the reaction of DTNB with non-specific reducing agents created a major source of error. However, this error was corrected by the use of blank samples that did not contain DMPTB.