• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.1
• /
• pp.33-38
• /
• 2013

Occlusal plane is a sagittal expression of dental arch form, and it composes the shape of occlusion, which is one of the most important elements of Maxillo-oral system. In this case, vertical, horizontal coordinates of bionic-median-sagittal plane was produced in articulator, and to achieve relation of left and right position of upper, lower teeth and deficits in alveola, Shilla system was used to reconstruct occlusal plane. In this case, a 41 year-old male patient visited for fracture of 10 unit metal-ceramic fixed partial denture of upper anterior teeth and for overall treatment. Clinical, radiographical, model examination was held, full mouth rehabilitation was achieved by placing dental implant. Maxillo-oral relation was recorded using Gothic arch Tracer complex and were mounted. And for the next step, we estimated original occlusal plane using Shilla system. After analysis we produced diagnosis wax pattern. On the basis of this, radiography stent was manufactured and dental implant was placed, and temporary prosthesis was made by using diagnosis wax pattern. Cross mounting and anterior guiding table were performed in order to reproduce temporary restoration morphology and bite pattern, followed by final restoration made of all ceramic crown with zirconia coping. As stated above, appropriately esthetic and functional results can be seen in using Shilla system in diagnosis and treatment procedure of full mouth rehabilitation patient.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.70-79
• /
• 2016

Patients who lost posterior teeth due to periodontitis or dental caries have collapsed vertical dimension, unstable occlusion and change of the mandibular position. In particular, patients in orthognathic surgery, clinician should re-establish the pre-operative stable position of mandibular condyle in articular fossa and favorable vertical dimension for high post-operative stability of mandible. Therefore, interdisciplinary approach and co-operation, including prosthetics, orthodontics, oral and maxillofacial surgeon, from diagnosis and treatment plan is important to get a good outcome. This case report was patients who had collapsed occlusal plane due to severe dental caries on maxillary molars with skeletal Class III malocclusion. Before orthognathic surgery, resetting of maxillary occlusal plane with temporary removable denture was performed. Then successful multidisciplinary approach was done and lead to acceptable clinical outcome.

• The Journal of Korean Academy of Prosthodontics
• /
• v.14 no.1
• /
• pp.55-65
• /
• 1976

The influences of the mandibular displacement and valium administration on the muscular activity were observed by spectrophotometric analysis of glycogen, glucose, G-6-P, lactate, pyruvate, ATP, phosphocreatine ana protein. Experimental animals were divided into three groups; the first was the mandibular displacement group, the second was valium administered group and the third was the mandibular displacement and valium admministered group. In mandibular displacement group, the high inclined plane with a gap of 2.5mm to 3.0mm between the upper and lower incisors was created by setting the silver crowns on the lower incisors. By creating such a high inclined plane, the bite was opened and the mandible was dispalced posteriorly. In valium administered group, 5mg/kg body weight of valium was administered intraperitoneally every day until the animal was sacrificed. Results were as follows: I) The body weight of all experimental rats was decreased in the beginning of experimental periods. The body weight of the mandibular displacement group showed the similar increasing rate as the control group from 15 days of experimental period. 2) The superficial masseter muscles of the mandibular displacement group appeared to be decreased it's functional activity at 36hrs, 60hrs and 96hrs of experimental periods as revealed by the decrease of various metabolites studied in this experiment. From 96hrs of experimental periods, the contents of those metabolites tended to increase up to the control level. 3) The superficial masseter muscle of 2nd group showed the decreased value of all metabolites at until 60hrs and the values were recovered to almost the same as the control at 168hrs. 4) Glycogen and G-6-P contents induced by mandibular displacement plus valium administration, showed longer duration of the decreased value than 1st group. And the decrease of glucose and pyruvate contents induced by mandibular displacement at 36hrs and 60hrs of experimental periods was enhanced by valium administration. However, the contents of lactate in 3rd group were decreased continuously until the end of experiment.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.937-946
• /
• 1998

The patient with an anterior open bite has one of the most difficult orthodontic problem to correct. Previous studies have yielded different conclusions as to exactly where the morphologic problems associated with vertical dysplasia-high angle cases are located. In order to identify the cephalometric features of high angle cases and highlight the measurements that characterize high angle cases, 109 pretreatment cephalograms, 35 high angle, 37 average angle, and 37 low angle cases, were analyzed and compared statistically. As the mandibular plane was steeper, the anterior facial height, especially lower anterior facial height, became greater, and the posterior facial height became smaller. All the dentoalveolar vertical dimensions, especially in upper, increased. And all the skeletal angular measurements increased. Especially Lower genial angle had most positive correlation to mandibular Plane angle. Upper incisor was lingually inclined, and lower incisor was labially inclined in high angle cases.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.179-203
• /
• 1992

This study was designed to analyze nasal respiratory patency and its correlation with skeletal components in growing children with anterior crossbite. The subjects consisted of 40 control patients, 24 nose breathers with anterior crossbite and 18 mouth breathers with anterior crossbite. The mean age was 11.4 years in the control group, 10.1 years in nose breathing group and 9.5 years in mouth breathing group. The results were as follows, 1. In anterior cross bite group, and nasal respiratory airflow rates (N.R.A.R.) was significantly lower than that of control group regardless of nasal decongestants application. 2. The N.R.A.R. of mouth breathers with anterior crossbite in male group was significantly lower than that of mouth breathers, but increased to the level of control group after nasal decongestants application. But in female group, the N.R.A.R. was significantly lower in mouth breathing group at both conditions. 3. Mouth breathing group showed smaller anterior vertical nasal cavity height (ANS-ANS'), lower upper anterior facial height ratios (N-sp'/N-Me) and higher maxillary occlusal plane ratios (OL-ML/ML-NL) than those of nose breathing group with anterior crossibte. 4. Items showing nasal height (ANS-ANS', PNS-PNS'), anterior upper facial height (N-sp') was were strongly correlated with N.R.A.R. at 150 pascal in inspiration. But item showing maxillary occlusal plane ratios (OL-ML/ML-NS) was negatively correlated with N.R.A.R. at 150 pascal in inspiration. 5. There were forward tongue position in mouth breathing group, but it was not significantly correlated with N.R.A.R. at 150 pascal in inspiration.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.197-208
• /
• 1998

This study was carried out to compare the amount of the maxillary bone remodeling and tooth displacement in each three maxillary superimposition methods, Ricketts, Best-fit, Structural method. Forty cases of the lateral cephalometric radiographs from 27 boys and 13 girls who had been treated to correct anterior cross-bite were selected for the study. The initial radiographs were taken at about 8-year-old and the second radiographs were taken in about 3.3 years later. Followings were the results: 1. With the Structural method, backward movement was shown in PNS, while forward movement was observed in ANS and point A. With the Ricketts method, however, all structures were shown significant backward movement comparing with Structural method(P<0.05). With the Best-fit method, the amount of horizontal movement was similar to that of the Structural method(P>0.05). 2. The palate seemed to be moved downward with Structural method, but there was no measured downward remodeling on nasal floor with Ricketts and Best-fit method(P<0.05). 3. Comparing with Structural method, Ricketts and Best-fit method significantly underestimated the eruption of the teeth by 20% to 30% (P<0.05). 4. The Structural method showed the anteroinferior rotation (43%) and posteroinferior rotation(57%) of the palatal plane, while the Best-fit method showed mostly anterosuperior rotation(87%), but no change was found in the Ricketts method. 5. With the Structural method, there was a statistically significant correlation between the amount of the rotation of the palatal plane and that of N-S line(r=0.86). 6. The measured angles of the long axis of the incisors and molars showed no significant difference in each 3 methods(P>0.05).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2468-2479
• /
• 1996

An upper bound solution is obtained to perform the process analysis of hot strip rolling process. The material flows within the roll bite at various geometries and frictional conditions are obtained from finite element analysis and the typical flow pattern which is necessary to determine the kinematically admissible velocity field is assumed. From the kinematically admissible velocity field, the upper bound energy is calculated and the rolling load, angle of neutral point and forward slip ratio at various operational conditions are obtained from upper bound energy. The process analysis of above mentioned parameters at various operational conditions have provided valuable information which is hard to obtain during rolling operation and the predicted ranges of quantitive values from these analyses lie whthin the bound of actual operational data.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.199-207
• /
• 2013

Purpose: The importance of occlusal contacts of the natural dentition for durability of teeth, mandibular stabilization, and restorative dentistry is well known. The purpose of this study is to analyze the occlusal contact and guidance pattern of Koreans by evaluating the static occlusion on maximal intercuspal position and measuring dynamic occlusion during straight protrusion. Materials and methods: The occlusal contacts at maximal interincisal position and the occlusal guidance pattern during straight protrusion of 29 subjects were recorded with shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA) and compared. Occlusal registration procedures were repeated 3 times. The position was fixed to an upright position and the head position was fixed with the Frankfurt horizontal plane paralleling the horizontal plane. Fisher's Exact Test (R-General Public License, ver. 2.14.1) and Pearson's Test were used to assess the significance level of the differences between the experimental groups (${\alpha}=.05$). Results: When using shimstock foil, T-Scan III system, and polyvinylsiloxane registration material, most of the patients showed contact on anterior, premolar, and molar teeth during maximal intercuspal position. Approximately 51% of maximal intercuspal position showed anterior contact using shimstock foil. When examining the protrusive movement using shimstock foil and T-Scan III system, guidance pattern with the central incisor was the most common. Conclusion: During maximal intercuspal position, there were cases in which not all of the teeth showed occlusal contact. During mandibular protrusive movements, one or more maxillary central incisors frequently joined in straight protrusion and the posterior teeth were disoccluded. Therefore, the anterior teeth protect the posterior teeth, and vice versa. Thus, mutually protected occlusion should be applied when reconstructing occlusion.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.197-208
• /
• 1997

Class III malocclusion patients can be approached with many different types of treatment methods, and thus, each patient's problems must be accurately evaluated to allow selection of the best possible treatment method. Cephalometric analysis is an essential part of diagnosis and treatment planning of orthodontic patients, and it would certainly be helpful if reliable cephalometric guidelines could be set. The author divided 482 Class III malocclusion patients(253 males and 229 females) into fourgroups according to different types of treatment methods they have received to correct imbalance between upper and lower jaws: 1) orthopedic appliance (face mask & RPE), 2) camouflage treatment with fixed appliance, 3) surgical-orthodontic treatment, 4) cross-bite correction with removable plates/ functional appliance. Cephalometric values at the time of first clinical examination were compare among the four groups. Cephalometric analysis indicates the following results: 1)the amounts of antero-posterior and vertical skeletal discrepancies and dental compensation were greatest in surgery group 2) SNB, Wits, distance from Nasion Perpendicular Plane to point a facial angle, facial convexity, and APDI were greater in orthopedic appliance group than fixed appliance(camouflage) group, but there was no statistical difference 3) removable plates/ functional appliance group showed least amounts of skeletal discrepancies and dental compensation with statistical significance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.145-153
• /
• 1991

A numerical simulation of the nonsteady state rolling process in the plane strain condition is presented in the basis of the rigid-plastic finite element method by considering large deformation. In order to apply the large deformation theory to the numerical method for sheet rolling problems, constitutive equation relating 2nd-Piola Kirchhoff stress and Lagrangian strain which reflect geometrical nonlinearity is used. To confirm the validity of the developed algorithm, the analysis of the neutral flow region, roll separating force, torque, pressure and stress/strain distributions on the workpiece is conducted from the bite of the material until the steady state is reached. The computed results of the roll force and torque in the present finite element analysis are lower than those corresponding to small strain theory. The pressure distribution at the work piece-roll interface is found to show the typical 'friction hill' type only. The peak value in near the neutral region, however, is good agrements with the existing results. the neutral region, however, is good agrements with the existing results. The frictional force at the roll interface provide detailed information about the neutral point where the shear forces change direction. In addition, the analysis also includes the effect and influence of material condition, strip thickness, work roll diameter, as well as roll speed and lubricant on each deformation process.