• 아시안잔디학회지
• /
• 제19권2호
• /
• pp.95-102
• /
• 2005

USGA green specification is currently accepted in construction method of Korea. This study was carried out to find the factors influencing growth of turfgrass associated with soil physical properties of soil root-zone on golf green constructed with USGA method. Three putting greens in poor turfgrass and one in good turfgrass condition were selected for investigation on one golf course site at mid-South Korean peninsula. Soil hardness, moisture content, root length, and turf density were measured on-site greens, and soil physical properties and soil chemical properties also analyzed in laboratory. As a result of on-site surveys and soil physical tests in laboratory, soil physical properties were most important factors which influenced on turfgrass growth at tested greens. The results of soil particle analysis on green No. 2, in good turf condition, matched USGA sand particle recommendations. But those greens such as Nos. 1, 11 and 16, in poor putting greens, showed high soil compaction and improper soil particle distribution. Those factors created low leaf density, poor root depth, and higher moisture content compared with lower part of topsoil. Such phenomena caused inadequate turfgrass growth with soil hardening associated with poor drainage. Therefore, declines of soil physical properties associated with improper particle distribution caused a major factor influencing on turfgrass growth in golf green. Adequate test of soil particle analysis by USGA specification and proper construction method followed by adequate turf maintenance should be performed to obtain optimal turf quality on putting green.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.657-663
• /
• 2019

In this work, we study physical and mechanical properties of oxide films formed on AZ91D magnesium alloy by plasma anodization at different temperatures. It is found that the higher the electrolyte temperature, the lower is the breakdown voltage of oxide layer. This is probably because films formed at higher temperatures are thinner and denser. Moreover, electrolyte temperature plays an important role in the physical properties of the films. As the electrolyte temperature increases from 20 to $50^{\circ}C$, the hardness of the oxide layer increases. Friction test against steel balls indicates that wear scars become narrower for films formed at higher temperatures because the films are harder, as indicated by the Vickers hardness. The thinner and denser nature of the oxide film formed at $50^{\circ}C$ is also advantageous for heat transfer when film is used as a heat sink. Laser flash test results show very fast heat transfer for AZ91D with plasma anodized oxide layer formed at higher temperatures.

• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.330-333
• /
• 1995

알코올처리 찰가자미류껍질 젤라틴을 식용단백소재로 이용하기 위한 기초자료를 얻을 목적으로 첨가제에 의한 알코올처리 젤라틴의 물리적 특성치의 변화를 검토하였다. 겔강도, 졸화온도, 겔화온도 및 점도와 같은 물리적 특성치는 에탄올처리의 유무에 관계없이 두 젤라틴 모두가 철이온, 당 및 에탄올을 첨가한 경우는 증가하였으나, 염화나트륨 및 유기산을 첨가한 경우는 감소하는 경향을 나타내었고, 첨가물에 의한 물리적 특성치의 증감폭은 에탄올 처리 유무에 따라 차이가 없었다.

• Applied Biological Chemistry
• /
• 제39권3호
• /
• pp.218-221
• /
• 1996

가공적성이 우수한 알코올처리 각시가자미껍질 젤라틴을 식품산업소재로 이용하기 위한 기초자료를 얻을 목적으로 가공시 많이 이용하거나 혼입될 우려가 있는 철이온, 식염, 당, 산 및 알코을 등에 의한 알코올처리 젤라틴의 물리적 특성의 변화를 무처리 젤라틴과 비교하여 검토하였다. 겔강도, 졸화온도, 겔화온도 및 점도와 같은 물리적 특성치는 에탄올처리의 유무에 관계없이 두 젤라틴 모두가 철이온 , 당 및 에탄올을 첨가한 경우 증가하였으나, 염화나트륨 및 유기산을 첨가한 경우는 감소하는 경향을 나타내었다. 첨가물에 의한 물리적 특성의 변화폭은 에탄올처리 젤라틴이 무처리 젤라틴에 비하여 식염, 당 및 에탄올을 가한 경우 차이가 없었으나 철이온 및 산을 가한 경우 적었다.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.950-955
• /
• 2009

The physical and rheological properties of thermoplasticized irradiation-crosslinked polyethylene foam using supercritical methanol treatment were investigated by GPC, FTIR, DSC, WAXS, DMTA and UDS. The polyethylene foam was selectively decrosslinked into thermoplasticized polyethylene in an appropriate supercritical methanol condition without any undesirable side reactions such as oxidation and disproportionation. The thermoplasticization was promoted with increasing reaction temperature to reach completion above $380^{\circ}C$. The supercritical reaction condition affected the crystallization behavior, and mechanical and rheological properties of the decrosslinked polyethylene foam, but not its crystallographic structure or crystallinity.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.246-246
• /
• 2006

Ionic polymer-metal composite (IPMC) soaked with various ionic liquids was prepared by using polystyrene sulfonic acid-grafted poly(vinylidene fluoride-co-hexafluoropropylene) as ion-exchange membrane (IEM). The prepared IPMCs were effectively deformed three times larger and actuated for 300 times longer than those of Nafion with water at the same applied conditions. The experimental results indicated than the increase in the bending capability can be caused by the increase in the improved properties of the IEMs and ionic liquids such as uptake content and ionic conductivity. And air-operating stability of the IPMCs is appreciably governed by various physical and electrochemical properties of soaked solvents in IEMs.

• Journal of Microbiology and Biotechnology
• /
• 제27권3호
• /
• pp.552-560
• /
• 2017

Quorum quenching (QQ) bacteria entrapped in a polymeric composite hydrogel (QQ medium) have been successfully applied in membrane bioreactors (MBRs) for effective biofouling control. However, in order to bring QQ technology closer to practice, the physical strength and lifetime of QQ media should be improved. In this study, enforcement of physical strength, as well as an extension of the lifetime of a previously reported QQ bacteria entrapping hollow cylinder (QQ-HC), was sought by adding a dehydration procedure following the cross-linking of the polymeric hydrogel by inorganic compounds like $Ca^{2+}$ and boric acid. Such prepared medium demonstrated enhanced physical strength possibly through an increased degree of physical cross-linking. As a result, a longer lifetime of QQ-HCs was confirmed, which led to improved biofouling mitigation performance of QQ-HC in an MBR. Furthermore, QQ-HCs stored under dehydrated condition showed higher QQ activity when the storage time lasted more than 90 days owing to enhanced cell viability. In addition, the dormant QQ activity after the dehydration step could be easily restored through reactivation with real wastewater, and the reduced weight of the dehydrated media is expected to make handling and transportation of QQ media highly convenient and economical in practice.

• 센서학회지
• /
• 제31권3호
• /
• pp.175-179
• /
• 2022

The physical properties of biomaterials are important for their isolation and separation from body fluids. In particular, the precise evaluation of the multi-physical properties of single biomolecules is essential in that the correlation between physical and biological properties of specific biomolecule. However, the majority of scientific equipment, can only determine specific-physical properties of single nanoparticles, making the evaluation of the multi-physical properties difficult. The improvement of analytical techniques for the evaluation of multi-physical properties is therefore required in various research fields. In this study, we developed a motion-tracking algorithm to evaluate the multi-physical properties of single-nanoparticles by analyzing their behavior. We observed the Brownian motion and electric-field-induced drift of fluorescent nanoparticles injected in a microfluidic chip with two electrodes using confocal microscopy. The proposed algorithm is able to determine the size of the nanoparticles by i) removing the background noise from images, ii) tracking the motion of nanoparticles using the circular-Hough transform, iii) extracting the mean squared displacement (MSD) of the tracked nanoparticles, and iv) applying the MSD to the Stokes-Einstein equation. We compared the evaluated size of the nanoparticles with the size measured by SEM. We also determined the zeta-potential and surface-charge density of the nanoparticles using the extracted electrophoretic velocity and the Helmholtz-Smoluchowski equation. The proposed motion-tracking algorithm could be employed in various fields related to biomaterial analysis, such as exosome analysis.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.186-192
• /
• 2022

Collagen is one of the most widely used biological materials in medical design. Collagen extracted from marine organisms can be a good biomaterial for tissue engineering applications due to its suitable properties. In this study, collagen is extracted from fish skin of Ctenopharyngodon Idella; then, the freeze drying method is used to design a porous scaffold. The scaffolds are modified with the chemical crosslinker N-(3-Dimethylaminopropyl)-N'-ethyl carbodiimide hydrochloride (EDC) to improve some of the overall properties. The extracted collagen samples are evaluated by various analyzes including cytotoxicity test, SDS-PAGE, FTIR, DSC, SEM, biodegradability and cell culture. The results of the SDS-PAGE study demonstrate well the protein patterns of the extracted collagen. The results show that cross-linking of collagen scaffold increases denaturation temperature and degradation time. The results of cytotoxicity show that the modified scaffolds have no toxicity. The cell adhesion study also shows that epithelial cells adhere well to the scaffold. Therefore, this method of chemical modification of collagen scaffold can improve the physical and biological properties. Overall, the modified collagen scaffold can be a promising candidate for tissue engineering applications.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.438-448
• /
• 2011

Chitosan is widely used in cosmetics and medical fields. Special emphasis has been put on the chemical modification of chitosan to explore its full potential. We have described the synthesis and biological activity of novel peptide amino acid derivatives. The polyamino acid derivatives were synthesized by introducing alkylamine functional group on chitosan at C-6. The poor aqueous solubility of chitosan derivatives hinder both pharmacological studies and pharmaceutical development. To make amino acid coupled chitosan derivatives with improved biological effect and solubility, some attempts have been taken to consist of amino peptide group like aspartic acid and phenylalanine-aspartic acid derivatives onto chitosan C-6. The resultingly substituted chitosan was characterized by solubility in various solvents. We measured chitosan derivatives with $^1H$-NMR and $^{13}C$-NMR. Also, We were investigated on the physical properties and biological activities of these products.