• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.61-66
• /
• 2015

Purpose: The purpose of this study was to establish conditions to dry a radish by examining the drying and quality characteristics depending on the air temperature and velocity of a far infrared conveyor dryer. Methods: A sample of weighing 6 kg was dried until the moisture content reached $15{\pm}0.5%$ (w.b.). Four temperatures (50, 60, 70, and $80^{\circ}C$) and three air velocity levels (0.4, 0.6, and 0.8 m/s) were employed as the drying factors. Results: The drying rate increased with the increase in the temperature and air velocity but decreased with time. However, the drying rate was influenced by temperature rather than velocity. At a temperature $50^{\circ}C$ with a air velocity of 0.4 m/s, it took 350 min for the radish to dry which was the longest drying time; $80^{\circ}C$ with a air velocity of 0.8m/s, it took 180 min for the radish to dry, which was the shortest drying time. ${\Delta}E$ (the color difference value) increased with the increase in temperature and air velocity. The browning and rehydration ratio increased as the temperature rose. Energy consumption decreased with the increased temperature and air velocity. Conclusions: Based on the results of this study, the best drying conditions for the radish were determined to be a temperature of $70^{\circ}C$ with an air velocity of 0.8 m/s.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.69-74
• /
• 2017

Purpose: The purpose of this study is to analyze turbidity and quality characteristics of white rice as a function of main shaft blast velocity and to verify the optimum processing conditions in the cutting type white rice processing system (CTWRPS). Methods: Sindongjin, one of the rice varieties, which used to be produced in Gimje-si, Jeollabuk-do, in 2015, was used as the experimental material. Turbidity and quality characteristics of white rice were measured at three different main shaft blast velocities: 25, 30, and 35 m/s. The amount of test material used for a single experiment was 20 kg, and after processing, whiteness was found to be $42.5{\pm}0.5$, following which, turbidity and quality characteristics were measured. Results: Turbidity decreased with increase in the shaft blast velocity, and as a result, was lowest at 35 m/s of shaft blast velocity among all the other experiment velocities. The trend of cracked rice ratios was similar to the turbidity. Broken rice ratio turned out to be less than 2.0% in all the test conditions. In the first stage of processing, the processing pressure decreased as the main shaft blast velocity increased. Additionally, in the second stage of processing, the processing pressure was at its lowest value at the main shaft blast velocity of 35 m/s. Energy consumption, too, decreased as the main shaft blast velocity was increased. Conclusions: From the above results, it is concluded that the main shaft blast velocity of 35 m/s is best for reducing turbidity and producing high quality rice in a CTWRPS.

• Toxicological Research
• /
• 제28권3호
• /
• pp.165-172
• /
• 2012

Raphanus sativus (Cruciferaceae), commonly known as radish is widely available throughout the world. From antiquity it has been used in folk medicine as a natural drug against many toxicants. The present study was designed to evaluate the hepatoprotective activity of radish (Raphanus sativus) enzyme extract (REE) in vitro and in vivo test. The $IC_{50}$ values of REE in human liver derived HepG2 cells was over 5,000 ${\mu}g/ml$ in tested maximum concentration. The effect of REE to protect tacrine-induced cytotoxicity in HepG2 cells was evaluated by MTT assay. REE showed their hepatoprotective activities on tacrine-induced cytotoxicity and the $EC_{50}$ value was 1,250 ${\mu}g/ml$. Silymarin, an antihepatotoxic agent used as a positive control exhibited 59.7% hepatoprotective activity at 100 ${\mu}g/ml$. Moreover, we tested the effect of REE on carbon tetrachloride ($CCl_4$)-induced liver toxicity in rats. REE at dose of 50 and 100 mg/kg and silymarin at dose of 50 mg/kg were orally administered to $CCl_4$-treated rats. The results showed that REE and silymarin significantly reduced the elevated levels of serum enzyme markers induced by $CCl_4$. The biochemical data were supported by evaluation with liver histopathology. These findings suggest that REE, can significantly diminish hepatic damage by toxic agent such as tacrine or $CCl_4$.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.349-356
• /
• 2017

The catch composition of commercially important species of the stationary lift net at Barangay Gines, Miagao, Iloilo, the Philippines was investigated from December 2013 to May 2014 during the different phases of the moon. A total of 486 kg of fish coming from 12 different genera, including mollusk and crustaceans, was caught and identified from the catch of the stationary lift net. Among the 12 genera identified from the catch of stationary lift net, anchovy (Stolephorus), sardines (Sardinella), squid (Loligo) and mysid shrimp (Acetes) were considered to be commercially important due to their value. Acetes catch was highest during the new moon in the month of January. Loligo catch was also high during the new moon except in the month of May. Stolephorus catch was also highest during the new moon except in the month of January. Sardinella catch was highest during the first quarter in the month of February. Full moon had the lowest catch all throughout the duration of the study while new moon had the highest catch during December 2013 to March 2014 and first quarter was the highest in the months of April and May.

• 한국의류산업학회지
• /
• 제13권1호
• /
• pp.32-43
• /
• 2011

This study investigate the transition about Japanese national costume kimono. The prototype of the present kimono is a kosode. The origin of kosode dates back to the mid-Heian period, when this type of kimono served as the everyday wear of commoners and an undergarment for court nobles, both men and women. In the Muromachi period, particularly after the Onin war, the kosode began to be by people of all classes. In the Muromachi period, kosode consisted mainly of woven textiles. In the Momoyama period, kosode became very elaborate, employing such various techniques as tie-dyeing, embroidery, metallic leaf(surihaku) and free-hand painting. These were further combined resulting in such techniques as tsujigahana dyeing and nuihaku, which are now considered to epitomize Momoyama-period textile design. A category of kosode of the early Edo period, known as Keicho kosode, is fashioned mainly from black, white, or red figured satin(rinzu), or from figured satin segmented in these three colors. Books of kosode designs began to be published in the Kambun era, when the merchant class was becoming economically powerful, kosode began to reflect its taste. During its final stage of development in the late 17th and early 18th centuries, yuzen dyeing achieved wide acceptance. From the late 18th century toward the early 19th century, kosode worn by the merchant class underwent drastic changes, while those worn by the samurai class changed little. In the after the late 18th century, clear differences in design and decorative methods appeared between the kosode worn by rich merchants and those worn by middle and lower class merchants.

• 한국컴퓨터정보학회논문지
• /
• 제20권5호
• /
• pp.91-98
• /
• 2015

본 연구는 국내 중-대형 SW개발 프로젝트 현장에 적용되고 있는 PMS의 주요 기능 및 적용효과에 대하여 소개하고, PMS적용의 중요성과 개선 필요성을 제시하고자 한다. PMS는 CMMI, PMBOK와 같은 글로벌 모델이 권고하는 모범 사례를 기반으로 주요 기능이 구현되었으며, 각 시스템이 목표로 하는 산업분야와 시스템을 구성하는 솔루션에 종속된 특화기능을 보유하고 있다. PMS적용에 따른 효과는 정성적, 정량적 효과로 구분할 수 있다. 대표적인 정성적 효과로는 SW개발 기업의 이미지 및 경쟁력 향상이며, 아울러 대표적인 정량적 효과로는 프로젝트 수행 현장의 관리 노력 절감에 따른 재무적 효과이다. 소프트웨어 프로젝트 수행과 관련한 법적, 환경적 변화에 따라 PMS적용에 대한 고객의 요구에 따른 수요는 증가될 것이므로 프로젝트 관리 분야의 글로벌한 변화추세에 따른 지속적 개선이 요구된다.

• 한국유기농업학회지
• /
• 제21권3호
• /
• pp.335-350
• /
• 2013

With the efforts to development of renewable energy technologies, and increasing awareness to environmental issues, the usage of wood pallets has been increasing every year since the introduction of wood pallet technology to the domestic market. until 2009, majority usage of pellet boiler was in the residential houses. In an effort to increase the distribution of wood pellet boiler to cultivation facilities with high usage of fuels, The Ministry of Agriculture and Forestry has launched a distribution project of wood pellet boiler for fuel usage as a part of the agricultural and fishery energy efficiency projects. Although only small number of farms with a heat-culturing facility have replaced from conventional boiler to pellet boiler. Although part of reason for low usage of pallet boiler is lack of understanding and information of it, the main reasons are high initial cost and uncertainty of its cost efficiency. Also, most people from agricultural industry don't realize it's significance in terms of environmental benefit due to lack of understanding in 'resource circulation' and 'adopting to climate change'. In this study, first, we did a cost-efficiency analysis of the farm which uses a diesel boiler to grow cucumber, tomato, paprika. Then we replaced the diesel boiler to a pallet boiler and measured its cost-efficiency again. By comparing the cost-efficiency of the diesel boiler with the pellet boiler, we analyzed the economic viability of pellet boiler. Then we analyzed viability of pallet boiler usage in terms of 'resource circulation' and 'adopting to climate change'. As a result of our analysis, we have found out that under the current system of government support, the energy usage varies depends of the types crops grown and the higher the energy use, the more cost efficient it is to use the pallet boiler. Also, it is economically viable to use the pallet boiler in terms of 'resource circulation' and 'adopting to climate change'.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권1호
• /
• pp.56-64
• /
• 2015

Acid mine drainage occurrence is a serious environmental problem by mining industry, it usually contains high levels of metal ions, such as iron, copper, zinc, aluminum, and manganese, as well as metalloids of which arsenic is generally of the greatest concern. An indigenous plant extract was used to produce calcium carbonate from Canavalia ensiformis as effective biomaterial, and its ability to form the calcium carbonate under stable conditions was compared to that of purified urease. X-ray diffraction and scanning electron microscopy were employed to elucidate the mechanism of calcium carbonate formation from the crude plant extracts. The results revealed that urease in the plant extracts catalyzed the hydrolysis of urea in liquid state cultures and decreased heavy metal amounts in the contaminated soil. The heavy metal amounts were decreased in the leachate from the treated mine soil; 31.7% of As, 65.8% of Mn, 50.6% of Zn, 51.6% of Pb, 45.1% of Cr, and 49.7% of Cu, respectively. The procedure described herein is a simple and beneficial method of calcium carbonate biomineralization without cultivation of microorganisms or further purification of crude extracts. This study suggests that crude plant extracts of Canavalia ensiformis have the potential to be used in place of purified forms of the enzyme during remediation of heavy metal contaminated soil.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.70-70
• /
• 2011

The prospects of current and coming solar-photovoltaic (PV) technologies are envisioned, arguing this solar-electricity source is beyond a tipping point in the complex worldwide energy outlook. Truly, a revolution in both the technological advancements of solar PV and the deployment of this energy technology is underway; PV is no longer an outlier. The birth of modern photovoltaics (PV) traces only to the mid-1950s, with the Bell Telephone Laboratories' development of an efficient, single-crystal Si solar cell. Since then, Si has dominated the technology and the markets, from space through terrestrial applications. Recently, some significant shift toward technology diversity have taken place. Some focus of this presentation will be directed toward PV R&D and technology advances, with indications of the limitations and relative strengths of crystalline (Si and GaAs) and thin-film (a-Si:H, Si, Cu(In,Ga)(Se,S)2, CdTe). Recent advances, contributions, industry growth, and technological pathways for transformational now and near-term technologies (Si and primarily thin films) and status and forecasts for next-generation PV (nanotechnologies and non-conventional and "new-physics" approaches) are evaluated. The need for R&D accelerating the now and imminent (evolutionary) technologies balanced with work in mid-term (disruptive) approaches is highlighted. Moreover, technology progress and ownership for next generation solar PV mandates a balanced investment in research on longer-term (the revolution needs revolutionary approaches to sustain itself) technologies (quantum dots, multi-multijunctions, intermediate-band concepts, nanotubes, bio-inspired, thermophotonics, ${\ldots}$ and solar hydrogen) having high-risk, but extremely high performance and cost returns for our next generations of energy consumers. This presentation provides insights to the reasons for PV technology emergence, how these technologies have to be developed (an appreciation of the history of solar PV)-and where we can expect to be by this mid-21st century.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.193-200
• /
• 2015

Purpose: The purpose of this study was to investigate the energy saving effects and characteristics of plant growth in a greenhouse with an aluminum multi-layer curtain compared to a greenhouse with non-woven fabric. Method: The dimensions of both greenhouses $43m{\times}3.6m{\times}8m(L{\times}H{\times}W)$, and both used hot air heater systems for maintaining a constant temperature $15^{\circ}C$. Heating characteristics such as solar intensity, inside and ambient temperatures, and fuel consumption were measured and analyzed. Results: The changes of average temperature of both greenhouses during a 15-days (December 06 - 20) showed approximately $26^{\circ}C$ at around 2 pm when the ambient temperature was highest. The greenhouses were set by the heater to keep a temperature of $15^{\circ}C$ from 4 pm to 8 am the following day. The average heat loss (for 15 days) from the greenhouse with an aluminum multi-layer curtain was $161.2-268.4kJ/m^2{\cdot}h$ during the daytime and $152.3-198.1kJ/m^2{\cdot}h$ during the nighttime. The average heat loss (for 15 days) from the greenhouse with non-woven fabric was $155.7-258.9kJ/m^2{\cdot}h$ during the daytime and $144.9-207.0kJ/m^2{\cdot}h$ during the nighttime. The total heat loss (for one day) from the non-woven fabric system was $7,960kJ/m^2$($2,876kJ/m^2$ during the daytime, $5,084kJ/m^2$ during the nighttime). The heat supply over 36 days for the non-woven fabric system was higher than the aluminum multi-layer curtain system by $616.3-65,079.4kJ/m^2$. Conclusions: These results suggest that a greenhouse with an aluminum multi-layer curtain could save energy usage by 35% over a greenhouse with non-woven fabric.