• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.268-273
• /
• 2014

$Y_2O_3$ ceramic specimens were fabricated from the granular powder, obtained by spray drying process from the slurry. The slurry was prepared by mixing PVA binder, NaOH for Ph control, PEG and $Y_2O_3$ powder. The $Y_2O_3$ specimen was shaped in size of ${\phi}14mm$ and then sintered at $1650^{\circ}C$. The characteristics, microstructure, densities and plasma resistance of the $Y_2O_3$ specimens were investigated with the function of forming pressure and sintering time. $Y_2O_3$ specimens were exposed under the $CHF_3/O_2/Ar$ plasma, the dry etching treatment of specimens was carried out by the physical reaction etching of $Ar^+$ ion beam and the chemical reaction etching of $F^-$ ion decomposed from $CHF_3$. With increasing sintering time, $Y_2O_3$ specimens showed relatively high density and strong resistance in plasma etching test.

• Korean Journal of Clinical Pharmacy
• /
• v.26 no.4
• /
• pp.318-323
• /
• 2016

Background: Multidisciplinary team care (MTC) is a collaborative approach to treatment plan and ongoing care. We aimed to evaluate the clinical effect of MTC on the regulation of chronic kidney disease-mineral and bone disorder (CKD-MBD) complications in dialysis patients. Methods: This retrospective observational study was approved by the institutional review board. Among patients who have undergone dialysis at admission, the patients admitted to the nephrology ward were allocated to MTC group, and the others to usual care (UC) group. The MTC group had collaborative care by nephrologists, nurses, pharmacists, and nutritionists. The endpoints were the regulation of corrected calcium (cCa) and phosphate (P), the percent of patients in target level of cCa-P product ($cCa{\times}P$), and the prescription rate of non-calcium based P-binders. Results: A total of 163 patients were included from January to December 2009. A significant difference was shown in the percentage of patients in target $cCa{\times}P$ level at admission (MTC vs. UC, 81.40% vs. 91.67%; P = 0.038), but there was no significant difference at discharge. During admission, the cCa and P levels of patients in only UC group were significantly changed. In addition, compared with UC group, patients in MTC group were more likely prescribed appropriate P-binders, when they had higher $cCa{\times}P$ levels than $55mg^2/dL^2$ (P <0.001). Conclusion: It was found that MTC had beneficial effect on improving the regulation of CKD-MBD and the appropriate phosphate binder uses. Therefore, application of the MTC is anticipated to enhance quality of clinical care in chronic diseases.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.121-131
• /
• 2007

A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1276-1281
• /
• 2001

The feeding values of four indigenous Kenyan sorghum cultivars and the effects of polyvinylpyrrolidone (PVP) on the utilization of high tannin sorghum by broiler chicks were studied in two 3-week feeding trials. In Experiment 1, one hundred and five broiler chicks (initial average weight 97 g) were randomly assigned to each one of the seven grain-soybean meal diets. The diets consisted of maize [diet 1; no assayable tannin], white sorghum [diet 2; 0.59% catechin equivalents (CE)], cream sorghum [diet 3; 0.94% CE], light brown sorghum [diet 4; 2.71% CE] and dark brown sorghum [diet 5; 3.54% CE]. Diets 6 and 7 were included to test the possibility of overcoming the detrimental effects of sorghum tannins by adding PVP at 0.25% and 0.5% to dark brown sorghum, which resulted in dietary tannin levels of 3.46% and 3.38% CE respectively. In Experiment 2, the effects of tannin on dry matter digestibility (DMD) and nitrogen (N) retention were studied in a 3-week substitution assay in which high tannin sorghum (5% CE) was substituted for white maize at different inclusion levels. Ninety broiler chicks aged 7 days (initial average weight 102 g) were randomly assigned to each one of the six diets. The diets consisted of corn gluten meal and fishmeal as protein sources plus maize [diet 1] and high tannin sorghum at different inclusion levels [diets 2, 3, 4, 5 and 6], resulting in dietary tannin levels of 0, 1.25%, 1.66%, 2.08%, 2.5% and 3.2% CE respectively. Feed intake, feed efficiency and body weight gain were measured weekly. In Experiment 2, tannin absorption, DMD and N retention were measured on days 19, 20 and 21. The results of Experiment 1 showed that feed intake, feed efficiency and body weight gain were all affected by treatment (p<0.05). Diets 1, 2 and 3 gave similar body weight gains and all were better than diets 4 and 5 (i.e. 504, 517, 473 g, vs. 256, 267 g). Similarly, feed efficiencies were higher (p<0.05) for diets 1, 2 and 3 compared to diets 4 and 5 (0.4, 0.42, 0.39 vs. 0.21, 0.23). When 0.25% PVP was added to the dark brown sorghum (diet 6) there was no significant improvement in chick performance (p>0.05). However, addition of 0.5% PVP (diet 7) resulted in significant improvement (p<0.05) in body weight gain compared to the untreated dark brown sorghum. Overall, PVP did not completely overcome the deleterious effects of tannins. The results of Experiment 2 indicate that sorghum inclusion level and subsequent tannin level had no effect on feed intake, feed efficiency, weight gain, DMD and N retention. The above results suggest that tannin level should be limited to below 2.71% CE in broiler chick diets containing 20% CP and 0.4% methionine. However, in diets with 23% CP and 0.8% methionine tannin level of up to 3.2% will not affect performance. Consequently high tannin sorghum (5% CE) can be used to substitute for white maize by up to 100% in broiler chick diets.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.565-572
• /
• 2009

In this study, corrosion resistance of palm oil fuel ash (POFA) concrete as a blended concrete is evaluated by using electrochemical technique. The POFA is an industrial byproduct obtained from fuel ash after extracting palm oil from palm-tree. In order to obtain basic material characteristics of the POFA concrete, tests on compressive strength, slump, weight loss, bleeding and expansion ratio were carried out the early-aged POFA concrete. On the other hand, durability characteristics, both chloride penetration and carbonation depth test, were also conducted. Finally, corrosion resistance were evaluated by applying electro-chemical artificial crack healing technique, and the tests on the impressed voltage characteristic, galvanic current and linear polarization resistance. From the experimental results, it was found that long-term strength, bleeding, lower slump ratio, expansion ratio, chloride penetration, carbonation and corrosion resistance were improved by using the POFA due to activated pozzolanic reaction. It can be also mentioned that POFA concrete has a potential to be used as a cementitious binder for green-recycling resources.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.1034-1038
• /
• 2008

Degradative Solidification/Stabilization(DS/S) is a modification of conventional Solidification/Stabilization(S/S) that incorporates degradative processes for organic contaminant destruction with the low cost of conventional S/S. Inorganic contaminants are immobilized and chlorinated organic contaminants are destroyed by DS/S treatment. In this study, a DS/S using cement/slag/Fe(II) systems as binder was investigated to assess its effectiveness in degrading chloroform(CF) and methylene chloride(MC) contained in hazardous liquid wastes. The initial concentration of CF was 0.26 mM, 1.0 mM, 8.4 mM, 25 mM and 42 mM and Fe(II) was 200 mM. The result showed that degradation of CF in various concentration was in one kind reaction as pseudo-first-order and 95% of 0.26 mM initial concentration of CF was removed in five days. 50 mg/L of heavy metal was added in order to accelerate the rate of degradation of MC and initial concentration of MC was 3.50 mM however, degradation did not occur in system. Thus additional studies needed for degradation of MC and more studies on other reaction pathways products will help elucidate reaction mechanisms and pathways for chlorinated methanes in cement/slag/Fe(II) systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.8-14
• /
• 2000

Long term cultivation crops like tomato, capsicum, melon etc. demand much amount of continuous supplying of nutrition during the whole growing periods. It is not easy to cover satisfactorily the nutritional demands for them by splitted top dressings, slow release fertilizer applications and fertigation systems. To overcome these problems, the "CULTAN" (Controlled Uptake Long Term Ammonium Nutrition) Beaker Deposit techniques have been developed and it was put into PVC beaker with the combined nitrogen fertilizer type mixed with the ratio of one-third of ammonium sulfate-N and two-thirds of urea-N, in which nitrogen was loaded on the demanding amount of a tomato plant during the growing period. Gypsum was mixed as a binder, and loamy soil and compost were used as a diffusion regulator. It was placed upside down into root zone of tomato at the transplanting. Tomato roots were spreaded into the Deposit beaker by ammonium ions which attract root growth. The tomato fruit yield and nitrogen uptake by plant were increased by application of $NH_4$-Beaker deposit fertilizer rather than those of common fertilizer treatment. In conclusion, it was able to improve economic and ecological benefits through CULTAN system compared with common fertilization systems. CULTAN system was estimated as a prospective alternative to enhance productivity and minimize nutrient lose. In addition, it shows further developing possibility of CULTAN system by the supplement of micro-nutrients and pesticides in the macro-nutrient beaker deposits.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.296-300
• /
• 1988

A trial product of monogranular compound fertilizer for sesame under vinyle mulching cultivations was manufactured using the principal sources of urea, diammonium phosphate and muriate of potash in combination with a filler of zeolite and a binder of liquid waste from glutamic acid fermentation. Two field experiments using transparent vinyl mulching for single-crop cultivation and black vinyl mulching for cultivation after wheat and barley cropping were carried out to evalute their effects on sesame and the results obtained were as follows. Plant height and stem diameter of the trial product in sesame plant were higher and better than those of NPK split application and NPK all basic application. As the yield of the trial product was higher and similar to the NPK application plots in transparent and black vinyl mulching treatment respectively, the one time basic application of a developed monogranular compound fertilizer for sesame was possible under vinyl mulching cultivation.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.41-46
• /
• 2014

The property improvement of polycarbonate coated with a multilayer film composed of an inorganic $SiO_2$ film and a photocatalytic $TiO_2$ film was studied. The $SiO_2$ film as a binder had an excellent light transmission characteristic. After the treatment with atmospheric pressure plasma, the surface of $SiO_2$ film showed the hydrophilicity, which increased the film coating uniformity with a $TiO_2$-containing aqueous solution. When $TiO_2$ film was over 200 nm thick, the absorption effect of UV rays in the range of 180~400 nm suppressed the yellowing phenomena of polycarbonate substrate. The inorganic film improved the heat resistance of polycarbonate substrates. $TiO_2$ film in the outmost under the exposure of UV rays promotes the catalytic oxidation characteristics and yields the capability to the decomposition of organic contaminants, and also increases the self-cleaning properties due to the increase of hydrophilicity. Structural stability of the polycarbonate substrate coated with inorganic $TiO_2$ and $SiO_2$ film was shown. The role of $SiO_2$ film between $TiO_2$ and polycarbonate substrate suppressed the peeling of $TiO_2$ film by inhibiting the photocatalytic oxidation effect of $TiO_2$ film on the polycarbonate substrate.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.4
• /
• pp.148-154
• /
• 2019

Vanadium oxide based materials have been studied as novel negative electrode materials in lithium-ion batteries (LIBs) because of their high specific capacity. In this study, potassium metavanadate ($KVO_3$) was synthesized and its electrochemical properties are evaluated as a negative electrode materials. The aqueous solution of $NH_4VO_3$ is mixed with a stoichiometric amount of KOH. The solution is boiled to remove $NH_3$ gas and dried to obtain a precipitate. The obtained $KVO_3$ powders are heat-treated at 300 and $500^{\circ}C$ for 8 h in air. As the heat treatment temperature increases, the initial reversible capacity decreases, but the cycle performance and Coulombic efficiency are improved slightly. On the contrary, the electrochemical performances of the $KVO_3$ electrodes are greatly improved when a polyacrylic acid (PAA) as binder was used instead of polyvinylidene fluoride (PVDF) and a fluoroethylene carbonate (FEC) was used as electrolyte additive. The initial reversible capacity of the $KVO_3$ is 1169 mAh/g and the Coulombic efficiency is improved to 76.3% with moderate cycle performance. The $KVO_3$ has the potential as a novel high-capacity negative electrode materials.