• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.500-502
• /
• 2000

BiPbSrCaCuO 계 초전도체에서 관측되는 자기부양효과에 대하여 연구를 수행하였다. BiPbSrCaCuO 계 초전도체에 산화은을 첨가한 시료와 첨가하지 않은 시료의 자기적 특성을 측정하여 자기부양효과의 메카니즘에 대하여 고찰하였다. toroidal자석에서 관측되는 자기부양 효과는 자석의 중심부분에서만 발생하며, 자석의 ring 부분에서는 관측되지 않았다. 이 결과는 본 연구의 자기 부양효과의 발생에는 자석의 형상 및 자속의 분포 형태와 밀접한 관련이 있음을 의미한다.

• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.543-554
• /
• 1996

Bi-Sr-Ca-Cu-O 계에서 상형성에 관해 연구하였다. 임계온도가 80K인 초전도체는 Bi-Sr-Ca-Cu의 몰비율이 2:2:1:2의 성분으로부터 solid state synthesis의 방법으로 합성하였다. 이때 이상에 대한 x-ray diffraction pattern은 모두 색인하였다. 2:2:1를 기본으로한 solid solution의 형성을 Bi2Sr2-xCa1+yCu2O8+$\delta$으로 단일상(single phase)을 형성하고 있으며, 이때 x와 y의 범위는 0

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.3
• /
• pp.143-153
• /
• 1989

In conclusion, a high-Tc superconducting YBa sub(2) Cu sub(3) O sub(y) phase with zero resistance at about 90K was successfully prepared by nitrate solution method with densed micro structure. The result of the EDAX analysis on the isolated particles using the microscopic meissner effect showed that the particles were isolated at higher temperature due to the differences in O vacances rather than the differences in chemical compositions. The composition of the isolated particles were almost identical to the starting compositions on the samples prepared by the solid reaction and nitrate solution method but the Ba-rich composition were seen in the coprecipitated sample. The isolation process on Bi system was not successful due to the weak dimagnetism even though its high Tc above the liquid nitrogen temperature.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1212-1220
• /
• 2000

Bi-2223 초전도체계에서 석출물을 flux-pinning center로 이용할 수 있는지 가능성을 타진하기 위하여 $Bi_{1.8}$P $b_{0.4}$S $r_{2}$C $a_{2.2}$C $u_3$ $O_{8}$ 조성을 가진 Bi-2223/Ag 선재를 반응온도, 산소분압, 시간 등을 변화시키면서 열처리를 행하였다. 열처리 후 석출물들은 XRD, SEM, TEM, EDS로 분석하였다. Bi-2223 모상내의 (Ca, Sr)$_2$(Pb,Bi) $O_4$, B $i_{0.5}$ P $b_3$S $r_2$C $a_2$Cu $O_{12+}$$\delta$/ (3221)와 같은 2차상들의 크기와 분포는 2223 입자들의 연결성을 파괴하지 않고 열처리 조건에 의해서 조절할 수 있었다. 서냉 열처리가 된 시편은 임계전류밀도( $J_{c}$)값이 증가하였는데, 이는 2223 입자내 나노미터 크기로 형성된 석출물들이 flux-pinning sites로 작용한 것으로 추정된다.다.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.223-228
• /
• 1992

$Bi_2Sr_2Ca_2Cu_3Oy$-based superconductor phases were synthesized by the wet process using acetate precursors. Superconducting transition temperature ($T_c$) was determined from both measurements of electrical resistivity and magnetic susceptibility for the samples which were sintered at the temperatures of $850^{\circ}C$, $860^{\circ}C$, and $870^{\circ}C$ for 40 hours, respectively. The values of carrier concentration from Hall measurements were compared with $T_c$ data as a function of the sintering temperature. The formation mechanism of the superconducting phase was tentatively discussed on a basis of the distribution profile concept of the carrier concentration and the amount of superconducting phases in a ceramic bulk. This explanation may be supported by the experimental results of correlation between the relative amount of superconducting phases and the difference of $T_c$ values between superconducting onset temperature and cutoff temperature at each sintering temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.221-223
• /
• 1999

In this work, samples were manufactured variously by changing conventional calcining and sintering conditions and we tried the utilization by making the heat treatment time, which is demanded to high-Tc phase formation, much shorter. We found out optimal heat treatment conditions with the analysis on formation process at superconducting phase in term of the change of calcining and sintering time and then, examined X-ray diffraction(XRD) patterns, scanning electron microscope(SEM) measurement and energy dispersive X-ray spectrometer(EDX) of the samples manufactured under heat treatment conditions which we suggest here. As a result, 2223 high-$T_c$, phase of (Bi,Pb)SrCaCuO superconductor starting with ($Bi_l$ xPbx,)$_2$$Sr_2$$Ca_2$$Cu_3$$O_y$, composition was formed from 1 hr sintering sample at temperature nearby melting point and also the completed sample with calcining and sintering time of 9 hr was formed high-$T_c$.low-$T_c$ phase appearing in sight above the critical temperature of liquid $N_2$.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.603-606
• /
• 1988

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.3
• /
• pp.254-258
• /
• 2000

Current leads of high $T_{c}$ superconductor were fabricated with Bi excess B $i_{2.2}$/S $r_{1.8}$/C $a_{1}$/C $u_{2}$/ $O_{x}$ composition by rapid cooling method. The dimensions of final samples were fixed 3 mm and 8 mm diameter with 50 mm length each To control uniform density the samples were preformed by CIP(Cold Isostatic Press) process and followed by partial or full melting process after raising up to 90$0^{\circ}C$ for 30min. Plate shaped microstructure was clearly observed adjacent to the Ag tube wall and the size of plate was about 100$\mu$m. However the severe destruction of growth orientation was shown in the inner growth part. critical temperature ( $T_{c}$) was about 53~71K after directional growth while Tc was decreased about 77~80 K before directional growth. After directional growth critical current( $I_{c}$) and critical current density( $J_{c}$) in the specimen of 8 mm diameter at 50 K were about 110 A and 280 A/c $m^2$ respectively.pectively.ely.

• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.425-433
• /
• 1997

BSCCO thin films have been fabricated by co-deposition at an ultralow growth rate using ion beam sputtering(IBS) method. The growth rates of the films was set in the region from 0.17 to 0.27 nm/min. MgO(100) was used as a substrate. In order to appreciate stable existing region of Bi 2212 phase with temperature and ozone pressure, the substrate temperature was varied between 655 and 82$0^{\circ}C$ and the highly condensed ozone gas pressure(PO$_3$) in vacuum chamber was varied between 2.0$\times$10$^{-6}$ and 2.3$\times$10$^{-5}$ Torr. Bi 2212 phase appeared in the temperature range of 750 and 795$^{\circ}C$ and single phase of Bi 2201 existed in the lower region than 785$^{\circ}C$. Whereas, PO$_3$dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with T$_{c}$(onset) of about 90 K and T$_{c}$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as CaCuO$_2$was observed in all of the obtained films.lms.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.201-203
• /
• 1991

T. Kanal et al, were studied the superconducting properties in Bi system by mechanical grinding, in which the authors found that the samples ground degraded from the superconducting phases to nonsuperconducting phases. To obtain more information of the practical application in Bi system with high-Tc phase in this paper, these samples mechanically ground and the high-Tc phase properties of grinding powder samples were investigated.