• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2005

Embedded systems have a set of tasks to execute. These tasks can be implemented either on application specific hardware or as software running on a specific processor. The design of an embedded system involves the selection of hardware software resources, Partition of tasks into hardware and software, and performance evaluation. An accurate estimation of execution time for extreme cases (best and worst case) is important for hardware/software codesign. A tighter estimation of the execution time bound nay allow the use of a slower processor to execute the code and may help lower the system cost. In this paper, we consider an ARM-based embedded system and developed a tool to estimate the tight boundary of execution time of a task with loop bounds and any additional program path information. The tool we developed is based on an exiting timing analysis tool named 'Cinderella' which currently supports i960 and m68k architectures. We add a module to handle ARM ELF object file, which extracts control flow and debugging information, and a module to handle ARM instruction set so that the new tool can support ARM processor. We validate the tool by comparing the estimated bound of execution time with the run-time execution time measured by ARMulator for a selected bechmark programs.

• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.387-396
• /
• 2013

Non-point pollution source is difficult to control due to uncertain outflow path and emission. So, There are many development and research to Best Management Practices(BMP) established to manage the Non-point pollution source. Besides, various methods of estimated efficiency to exact assessment of BMP is presented. In this study, the impact about length of Grassed Swale on reduction efficiency based on monitoring results of Grassed Swale by length is studied. By estimating Grassed Swale reduction efficiency in a variety of methods, the difference between the methods of estimated efficiency was compared with those that. Estimated efficiency method using ER, SOL, ROL, ROF, SOLF, and ROLF methods is analyzed. EMC analysis result is high inflow and outflow concentration distinction organic compound for nutritive salts The result of efficiency analysis along Grassed Swale length sharply increases in a Grassed Swale inlet. After this increase, the efficiency gradually decreases. This is expected that cistern installed in the end of the front. To obtain a stable reduction efficiency of Grassed Swale, minimum length 30m of Grassed Swale should be enough. Also, in order to efficiently and economically design Grassed Swale, the researches on length of Grassed Swale are needed rather than simple analysis of efficiency.

• The Korean Journal of Archival Studies
• /
• no.18
• /
• pp.139-178
• /
• 2008

The functional requirements standards for electronic records management systems which have been published recently describe the specifications very precisely including not only core functions of records management but also the function of system management and optional modules. The fact that these functional requirements standards seem to be similar to each other in terms of the content of functions described in the standards is linked to the global standardization trends in the practical area of electronic records. In addition, these functional requirements standards which have been built upon with collaboration of archivists from many national archives, IT specialists, consultants and records management applications vendors result in not only obtaining high quality but also establishing the condition that the standards could be the certificate criteria easily. Though there might be a lot of different ways and approaches to benchmark the functional requirements standards developed from advanced electronic records management practice, this paper is showing the possibility and meaningful business cases of gaining useful practical ideas learned from imaging electronic records management practices related to the functional requirements standards. The business cases are explored central functions of records management and the intellectual control of the records such as classification scheme or disposal schedules. The first example is related to the classification scheme. Should the records classification be fixed at same number of level? Should a record item be filed only at the last node of classification scheme? The second example addresses a precise disposition schedule which is able to impose the event-driven chronological retention period to records and which could be operated using a inheritance concept between the parent nodes and child nodes in classification scheme. The third example shows the usage of the function which holds or freeze and release the records required to keep as evidence to comply with compliance like e-Discovery or the risk management of organizations under the premise that the records management should be the basis for the legal compliance. The last case shows some cases for bulk batch operation required if the records manager can use the ERMS as their useful tool. It is needed that the records managers are able to understand and interpret the specifications of functional requirements standards for ERMS in the practical view point, and to review the standards and extract required specifications for upgrading their own ERMS. The National Archives of Korea should provide various stakeholders with a sound basis for them to implement effective and efficient electronic records management practices through expanding the usage scope of the functional requirements standard for ERMS and making the common understanding about its implications.

• Communications of Mathematical Education
• /
• v.28 no.1
• /
• pp.19-44
• /
• 2014

This study aims to develop strategies for improving the affective characteristics of Korean students based on results from international achievement tests. In pursuing the goal, different research methods are employed including a) analysis of the theories and literature regarding the affective domains included in PISA and TIMSS studies; b) analysis of the current situation and needs of Korean students with respect to the affective factors based on PISA and TIMSS results; c) case studies of best practices in relation to students' affective domains in Korea and abroad; and d) development of strategies for improving and supporting Korean students' affective characteristics. In this paper, first of all, relevant theories on affective characteristics in literature are introduced. In other words, the concepts of three affective domains in question - interest, self-efficacy, and value - are reviewed, and their definitions for the present study are made. Also, teaching strategies and support plans for improving students' affective factors are extracted from previous studies. Furthermore, this paper reviews recent trends in research on how the affective domains are related to mathematics education and how one can teach them effectively. The teaching guidelines for each affective domain are developed according to the instruction principles extracted through literature review in general for all subjects. Based on the results of the findings mentioned above, this paper establishes and suggests the guidelines on how to teach mathematics reflecting the affective characteristic.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.176-181
• /
• 2012

Persistent accidents related to food safety and expanded international trades have urged the world to be aware of the gravity of the accidents. Accordingly many countries have tried to come up with various laws, regulations, measures, support networks and educational programs for the agenda, particularly focusing on harmonizing food safety technologies among nations and fostering professionals. Also, APEC newly organized Food Safety Cooperation Forum (FSCF) in 2007 to exert multi-dimensional efforts to improve food safety for Asia Pacific nations. Up to now, 35 activities have been promoted since 2007 and additional 20 activities are waiting for their turns for action on the list of APEC project agenda. FSCF has the objective that it helps the stakeholders in food supply chain develop their own competence in that area, thus increase international trade among nations and maintain the globe healthy by applying the highest standards and best practices for the management of food safety ranging from production to consumption. To achieve this strategic objective, APEC subsequently formed Partnership Training Institute Network (PTIN) to build up the multilateral networks of specialists from governmental agencies engaging in food safety management, industries, academia and international organizations in Asia-Pacific region. This attempt made it possible for the world to exchange their scientific and technological information concerning food safety and strengthen related education and training. Today, international cooperation is essential for food safety management. Therefore, we need to participate actively in the activities of APEC FSCF to contribute to improving food safety technologies for the member countries of APEC. We also need to connect the domestic support programs with theirs.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.5
• /
• pp.83-91
• /
• 2018

Purpose - The purpose of this study is to explore the introduction and activation of smart training for the effective training of vocational ability development of companies in the 4th industrial revolution era, we analyze the present status of smart training introduction and related difficulties and propose concrete activation plan. Research design, data, and methodology - Through the online survey, we tried to confirm the recognition of corporate about smart training. Questionnaires include what are the benefits, expectations, and difficulties of smart training, etc. The survey was conducted from August 21, 2017 to September 4, 2017. A total of 69 companies participated in the questionnaire. The questionnaire results were analyzed through frequency analysis and contents analysis. Based on the results of the questionnaire, we found out the cause of inhibition of smart training activation and suggested activation strategies. Results - The main reason for the provision of smart training is the expectation of the training performance and the recognition that it is possible to provide training in a flexible manner. The effectiveness of smart training operation was evaluated as a high level of contribution to the development of creative training course and the capacity of training institute. As a result of checking factors that hinders the activation of smart training, the most important reason is that the time and cost burden of the training institutes is excessive. The lack of expertise in the design of smart training courses and the burden of employers and trainees. Conclusions - In order to activate smart training, it is necessary to find solutions to the obstacles at the internal or external level of training institutions. The internal barriers to the training organization are lack of internal competence for preparation and course management. In this regard, we need to consider providing consulting, best practices or guidance in the process of designing and operating smart training. On the other hand, as an external obstacle factor, it is necessary to provide incentives to participate in smart training. In addition, further research is needed on strategies that can lead to participation in smart training from the viewpoint of employers and learners.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.67-78
• /
• 2018

This paper aims to investigate the nature of Customer Relationship Management (CRM) in liner shipping industries, study the organization's general characteristics which could help to promote such CRM practices, and analyze the relationship between the CRM and the organization's effectiveness. The result of analysis shows that the organizational characteristics which affect the CRM most in shipping industries are the market orientation and the CEO's support. In particular, the CRM was proven to have significant impact on employee satisfaction, service competitiveness enhancement, financial performance, customer satisfaction and the repurchase intention of the customers. This study also suggests that the CRM of liner shipping industries should be enforced comprehensively in synchronization with organizational characteristics, such as organizational culture and organizational systems. Based on such organizational characteristics, the noted CRM strategies were justified to have significantly impacted the overall management performance of the organizational performance of shipping industries and the customer's satisfaction and repurchase intention. This study would be appreciated as a meaningful analysis on the CRM in liner shipping industries which pursues the best interests of both shipping companies and customers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1077-1088
• /
• 2019

As the cyber threats of nuclear power plants become more necessary to systematically prepare against the cyber attack, the international community and the domestic government are urged to apply proper security controls for Critical Digital Assets (CDA) through cyber security regulatory guidelines. In this study, we suggests the application of security controls to develop the regulatory requirements of the graded approach through the analysis of domestic and foreign cyber security regulation guidelines and best practices for digital assets directly related to nuclear accidents. In order to apply the regulatory requirements based on the consequence(impact of infringement) of the regulated facility, which is a basic consideration of the graded approach, we will classify two methods and describe details of each method. By reanalyzing existing security controls, it is introduced that the method of demanding digital assets directly related to accident to enhance security controls required for existing CDA or develop additional security controls and requiring minimum security controls for CDA that are not directly related to accident.

• Journal of Korean Library and Information Science Society
• /
• v.52 no.3
• /
• pp.129-155
• /
• 2021

This study tried to suggest the revitalization plans for specialized libraries by referring to various issues regarding specialized libraries in the sense that the issue of specialized libraries can soon become an opportunity for the development of specialized libraries. Through literature analysis, problems and issues related to specialized libraries were derived, and the perception of librarians was investigated through surveys. The policy directions presented based on the results are as follows. First, the 'Library Development Plan' should strengthen the part related to the specialized library development plan. Second, topic maps for specialized libraries in Korea are needed.(Second, the topic map for specialized libraries in Korea is needed.) Third, it is also necessary to operate to configure multiple councils based on the distinction between the specialized library. Fourth, an analysis of the duties of specialized library librarians should be made. Fifth, professional information services that specialized libraries can perform need to be developed. Sixth, among the information resources owned by specialized libraries, it is necessary to find ways to establish and jointly utilize information resources that are valuable and shareable as national resources. Seventh, specialized libraries should allow every library to participate in library evaluation, and make improvement plans for specialized libraries based on the collected data. Eighth, it is also necessary to publish a collection of best practices for specialized libraries.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.304-313
• /
• 2018

Agricultural land reclamation in Saemangeum tidal land project is mostly planned to be completed by 2020. Irrigation water for the land is required to be prepared by that time. However, water quality for the irrigation sources is barely meet the target concentration. This paper described the reduction effect of and policy consideration for best management practices (BMPs) which were fertilizer prescription by soil test (SO#1), mixed application of SO#1 and 3 (SO#2), drainage gate control (SO#3), time-release fertilizer application (SO#4), and control (CT). Reduction of paddy runoff was relatively higher in SO#3 (25%) and SO#1 (27%) while lower in SO#4 (9%) and SO#2 (7%) than that in CT. In addition, farmers promised to follow the BMP guidelines but they didn't because of the several problems caused for the BMPs implementation. Thus, it recommended developing an automated control of irrigation gate and paddy water depth and supporing farmers for NPS pollution control and irrigation water reduction.