• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.3-7
• /
• 2014

Purpose SPECT/CT scan to be performed attenuation correction on the basis of CT induce an overestimation of the site due to the beam hardening artifact by metal cover and reduce the images quality. Therefore, this study using a phantom that has been inserted artificial hip joint investigated that effect on the SPECT/CT image causing by metal artifact for varying the parameters of the Attenuation Map. Materials and Methods Siemens Symbia T16 SPECT/CT equipment was used. Artificial hip joint was inserted to SPECT/PET phantom, 17 mm sphere of Bright Streak area in CT image was filled with Tc-99m so that the radiation activity was 8 times compared to background. And then Hot and Background was measured in varying Wide Beam Coefficient on Attenuation Map and RBR (Region to Background Ratio) of Metal and Non-Metal was calculated and analyzed depending on the presence or absence of the hip joint. Results It tended to hot count of Non-Metal and Metal to increase as the value of the manual mode is increased, hot count ratio with the group of both manual mode 0.5 and 0.4 is the best match. Also, in automatic mode, the ratio of RBRNon-Metal and RBRMetal was 1.135, statistically significant difference was not observed in the manual mode 0.5 and 0.4. Conclusion In the automatic mode of Wide Beam Coefficient in attenuation correction map, it was found that it is over-correction by 13.52%, it was possible to minimize the over-correction by the artifact in 0.5 and 0.4 of manual mode. Further studies should be performed in order to apply to a patient with the help of this and it is considered possible to reduce the over-correction by the metal artifact of an artificial hip joint for Hip-Resurfacing Arthroplasty patients, and to improve the diagnostic performance.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.161-183
• /
• 2011

This study aims to design, develop the impact of a high school course in practical problem- focused teaching plan which will enable students to deal with an aging society, and prepare well for the aging by looking at issues the elderly face. This study set a target of analyzing the 2007 revised curriculum manual to develop instructor-led teaching and learning plans for 'Successful aging preparation'. Five common subjects were reframed on a practical problem basis through factor analysis of preliminary research regarding aging education for teenagers and the 2007 revised curriculum and textbooks of Technology Home Economics, and Human Development. The practical problem was 'What do we need to do to Successfully live an independent life in aging?', and the subjects studied to answer this question were the aging society and population changes. the nature of the elderly, aging preparation, care of the elderly, and welfare services for the elderly. These five subjects were grouped under the main categories of The Aging Society. Understanding the Elderly, and aging Preparation. The ultimate objective of the lessons was, through critical reasoning, to inquire into the causes of current problems the elderly face so that teenagers can understand aging societies and the elderly, and prepare for a Successful aging. Another objective was to seek reasonable alternatives for teenagers as they prepare for Successful and independent aging, and increase their problem-solving abilities in choosing the best course of action by considering the ripple effect of consequences of each of those alternatives. The practical problem-teaching lesson plans consisted of five classes on practical reasoning instruction. This study suggests that new high school curricula should include lessons on preparation for aging so that students can deal successfully with our aging society.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.611-622
• /
• 2000

To investigate the exchange rates of mercury(Hg) across soil-air boundary, we undertook the measurements of Hg flux using gradient technique from a major waste reclamation site, Nan-Ji-Do. Based on these measurement data, we attempted to provide insights into various aspects of Hg exchange in a strongly polluted soil environment. According to our analysis, the study site turned out to be not only a major emission source area but also a major sink area. When these data were compared on hourly basis over a full day scale, large fluxes of emission and deposition centered on daytime periods relative to nighttime periods. However, when comparison of frequency with which emission or deposition occurs was made, there emerged a very contrasting pattern. While emission was dominant during nighttime periods, deposition was most favored during daytime periods. When similar comparison was made as a function of wind direction, it was noticed that there may be a major Hg source at easterly direction to bring out significant deposition of Hg in the study area. To account for the environmental conditions controlling the vertical direction of Hg exchange, we compared environmental conditions for both the whole data group and those observed from the wind direction of strong deposition events. Results of this analysis indicated that the concentrations of pollutant species varied sensitively enough to reflect the environmental conditions for each direction of exchange. When correlation analysis was applied to our data, results indicated that windspeed and ozone concentrations best reflected changes in the magnitudes of emission/deposition fluxes. The results of factor analysis also indicated the possibility that Hg emission of study area is temperature-driven process, while that of deposition is affected by a mixed effects of various factors including temperature, ozone, and non-methane HCs. If the computed emission rate is extrapolated to the whole study area we estimate that annual emission of Hg from the study area can amount to approximately 6kg.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.94-108
• /
• 2010

The purpose of this study is to provide data for the restoration of 'Yongyun(龍淵)' and 'Hwahongmun(華虹門)' through an investigation of the vicinity of their original landscapes at the time of construction of Hwaseong in Suwon and through tracing the transformative process of the environments of this vicinity. The results are as follows; As identified by 'Yongyunjung(龍淵亭)' and 'Yongdugak(龍頭閣)', other names of Yongyun, 'Banghwasuryujung(訪花隨柳亭)', which was built on 'Yongduam', is a facility whose place identity is highlighted with a sense of unity with Yongyun. The south lakefront of Yongyun, bordering Banghwasuryujung, has boundaries that make the best use of the natural geographical features of Yongduam while the current circumference of Yongyun is comparatively shorter than its original state. The size of 'Joongdo(中島)', however, seems to be an example of apparent over-design complement and reorganize 'Joongdo', which had been restored larger than its original state at the time of restoration in the 1970s. The depth of 'Yongyun' was created to be lower than the actual depth, without consideration for its initial depth, as soil was accumulated through continuous flooding after it was created. It is assumed that the original drains which were installed about 10m inside the lake were created facing the stream. As regards the planting environment, a circular planting of willows was made in the outskirts of 'Yongyun', except the 'Yongduam' which is a pure forest, and a mix of 'Pinus densiflora', shrubbery and deciduous broad leaf trees was planted in 'Joongdo'. Of the plants growing in the area of this study, plant species introduced to Korea after Hwaseong was constructed are found, most of which provide interest and attraction. The old pine trees growing in a group once grew in the castle areas of the vicinity even in the 1920s, the period of Japanese occupation, but they disappeared from the area in the aftermath of subsequent urban development and the Korean War. Although restored to the site, the number and space taken up by these trees are insignificant compared to those of the original environment. On the basis of these results, the following is considered necessary for the true restoration of the vicinity of 'Yongyun' and 'Hwahongmun': First, the grounds of 'Yongyun' should be dredged deeply enough to expose the bedrock and should be recreated in the rough outline of a half moon by extension to the southwest toward 'Yongduam' and 'Hwahongmun', and the size of 'Joongdo' should be significantly reduced. Secondly, considering that most plant species, except the pine trees and wild trees in 'Yongduam', are non-native plants introduced in order to provide such attractions such as the appreciation of scenic areas, they should be replaced with native species, mainly with the pine trees which were utilized during the construction of Hwaseong. The weeping willows planted in the 'middle-island' should be relocated to the outskirts of 'Yongyun', and replaced with pine trees as the major trees and maple trees or deciduous broadleaf trees to fill in the gaps. Thirdly, exotic species such as the 'Pinus rigida' planted in a group around 'Banghwasuryujung' and 'Bugammun' and 'Pinus strobus' planted in the vicinity of Hwahongmun' should be removed.

• Korean Journal of Poultry Science
• /
• v.6 no.2
• /
• pp.75-81
• /
• 1979

This study was carried out to select superior dual purpose hens which could spread to poultry farming for subsidiary work and general farmhouse. Three hundred and fifty chicks of 7 kinds of 2-way crossbred from mating of Rhode Island Red, New Hampshire and Australorps were tested for dual purpose performance. The results obtained were as follows: 1. The average viability of brooding, rearing and laying Period hen were 92.3% 98.3% and 93.1% respectively. There was significant difference at 1% level among crossbreds for brooding viability, but other viabilitys were no significant difference. 2. The average body weight of 8 weeks was 854.41g, but there was no significant difference among crossbreds, respectively. Average body weight at 300 days, 500 days were 2507.15g, 2632.25g respectively, but there was significant difference at 1% level among crossbreds. 3. Sexual maturity of individual and 50% egg production were 173.7 days and 199.4 days, respectively. There was significant difference at 5% level among crossbreds. 4. The average hen day egg production was 65.3% and the highest was R.N crossbred (70.5%). There was significant difference at 5% level among crossbreds and average hen housed egg Production was 20.2 eggs and the highest was 220.4 eggs in R.A. crossbred. 5. The average egg weight was 57.36g and the highest was A.N crossbred (58.3g). Therc was no significant difference among crossbreds. 6. The average feed consumption per hen per day by stag. was 42.9g (brooding period), 83.7g (rearing period), 131.1g (laying period). Average feed requirement per 1kg. egg production was 3.79 and th. R.A. crossbred was superiority (3.42). 7. On the basis of the results of this study, the R.A and R.N crossbreds were best for superior dual commercial chicks under farming management conditions.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.2
• /
• pp.77-98
• /
• 1974

This study was carried out ill an attempt to investigate the properties and activities of sericin obtained from silk cocoon shells in silk reeling water through various instrumental analyses. In addition, the effects of the characteristics in sericin solubility on the reeling process and silk qualities were also studied on the basis of tile above conditions. The results obtained are as follows： I. The sericin properties and activities through various analytical instruments. 1. The water solubility of each amino acid such as serine, glycine. glutamic and aspartic acids against the pH modified water by using automatic amino acid analyzer, showed the lowest solubility at PH 5, but it increased according to drifting toward the alkalinity. 2. When the obtained sericin particles by water pH variation were observed with the electronic microscope, it was found for the sericin Particles to expand in the alkaline regions. 3. The IR spectrum results showed the differences among the pH modified sericin solutions at the range of 2,100cm-1 and 1.890cm-1 of wave number. 4. The existence of sericin with in silk fabrics made differences in the X-ray interference intencity, that is, the non-degummed fabrics had the interference peak at 2$\theta$=14$^{\circ}$, 17$^{\circ}$, 24$^{\circ}$, and the degummed ones had it at 2$\theta$=17$^{\circ}$, 18$^{\circ}$, 20$^{\circ}$, 23$^{\circ}$, 26$^{\circ}$. II. The results of sericin solubility for silk reeling process. 1. The sericin solubility and swelling had a tendency to increase up with high M-alkalinity and pH value of water. But in case of acidity. water hardness and concentration of ethylene glycol were high, the sericin solubility and swelling were decreased. 2. With the filature experiments, the best conditions of filature orator are summarized as fellows ; a. pH; 6.9${\pm}$0.2 d. acidity; below10ppm b. total hardness; 55：5ppm e. Fe ion; none c. M-alkalinity; 40${\pm}$10ppm

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.137-147
• /
• 2012

Purpose: Analyze the Effectiveness of Radiation Treatment Planning by dose calculation and optimization algorithm, apply consideration of actual treatment planning, and then suggest the best way to treatment planning protocol. Materials and Methods: The treatment planning system use Eclipse 10.0. (Varian, USA). PBC (Pencil Beam Convolution) and AAA (Anisotropic Analytical Algorithm) Apply to Dose calculation, DVO (Dose Volume Optimizer 10.0.28) used for optimized algorithm of Intensity Modulated Radiation Therapy (IMRT), PRO II (Progressive Resolution Optimizer V 8.9.17) and PRO III (Progressive Resolution Optimizer V 10.0.28) used for optimized algorithm of VAMT. A phantom for experiment virtually created at treatment planning system, $30{\times}30{\times}30$ cm sized, homogeneous density (HU: 0) and heterogeneous density that inserted air assumed material (HU: -1,000). Apply to clinical treatment planning on the basis of general treatment planning feature analyzed with Phantom planning. Results: In homogeneous density phantom, PBC and AAA show 65.2% PDD (6 MV, 10 cm) both, In heterogeneous density phantom, also show similar PDD value before meet with low density material, but they show different dose curve in air territory, PDD 10 cm showed 75%, 73% each after penetrate phantom. 3D treatment plan in same MU, AAA treatment planning shows low dose at Lung included area. 2D POP treatment plan with 15 MV of cervical vertebral region include trachea and lung area, Conformity Index (ICRU 62) is 0.95 in PBC calculation and 0.93 in AAA. DVO DVH and Dose calculation DVH are showed equal value in IMRT treatment plan. But AAA calculation shows lack of dose compared with DVO result which is satisfactory condition. Optimizing VMAT treatment plans using PRO II obtained results were satisfactory, but lower density area showed lack of dose in dose calculations. PRO III, but optimizing the dose calculation results were similar with optimized the same conditions once more. Conclusion: In this study, do not judge the rightness of the dose calculation algorithm. However, analyzing the characteristics of the dose distribution represented by each algorithm, especially, a method for the optimal treatment plan can be presented when make a treatment plan. by considering optimized algorithm factors of the IMRT or VMAT that needs to optimization make a treatment plan.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.31-39
• /
• 2008

This study was performed to develop children's food quality certification system as part of the children's favorite foods safety management projects. As a component of the research, we developed a quality certification logo to build up brand image which is familiar with children, as well as to offer the right standard and opportunity for food selection. The age level contains elementary graders from 8 to 13. The logo concept was focused on 'Safety', 'Certification, Guidance' and 'Health' in accordance with the vision of the Korea Food and Drug Administration (KFDA), "Safe food, good nutrition and healthy children". The logo name was proposed as "Best Food for Children", "Safety Food for Children" and "Children Good Food", which was decided by public subscription in the KFDA. The 36 tentative plans for a seal were proposed depending on names. We conducted a survey for the 12 logo samples, designed by the name of "Children Good Food", to use as the basic material for the development of logo to convey the meaning of children's food quality certification system effectively. This survey was conducted among 321 elementary graders and 331 parents of elementary graders. We selected the most favorite design through the survey and applied it for products practicality. It is expected that a steady policy may be possible to implement by applying the basis of the children's food project.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.173-180
• /
• 1978

The sensory test and analysis of the proximate composition and hydroxyproline content of 4 kinds of Korean commercial sausage products (Beef, Hamburger, Frank, Hotdog) were carried out and the results were compared one another. The qualities of these sausage products were compared one another. The qualities of these sausage products were compared on the basis of the nutritive value of foreign sausages and according to the Korea Food Law. The results obtained were as follows. 1. The general conclusion drawn from the results of the proximate analysis was that the average composition of commercial sausages was adequate in view of the limits set by the Food Law. 2. The evaluation factors of sausages based on moisture-to-protein and protein-to-fat ratios were proposed tocompare the qualities of Korean commercial sausages with those of foreign commercial sausages. 3. Content of collagen as connective tissues in total protein of Korean commercial sausages were $2.1{\sim}15%$. The results of the present study appeared to suggest that meat contents of Korean commercial sausages used in this study were less than those of foreign sausages. 4. Among the 4 different kinds of sausages studied the qualities of Frank sausages were the best whereas those of Hotdog sausages were of the lowest quality. Beef sausages appeared better than Hamburger sausages from the view point of nutritive components.

• Journal of Distribution Science
• /
• v.8 no.3
• /
• pp.37-47
• /
• 2010

CRM refers to the operating activities that always maintain and promote good relationship with customers to ultimately maximize the company's profits by understanding the value of customers to meet their demands, establishing a strategy which may maximize the Life Time Value and successfully operating the business by integrating the customer management processes. In our country, many big businesses are introducing CRM initiatively to use it in marketing strategy however, most medium and small sized companies do not understand CRM clearly or they feel difficult to introduce it due to huge investment needed. This study is intended to present CRM promotion strategy and activities plan fit for the medium and small sized companies by analyzing the success factors of the leading companies those have already executed CRM by surveying the precedents to make the distributors out of the industries have close relation with consumers to overcome their weakness in scale and strengthen their competitiveness in such a rapidly changing and fiercely competing market. There are 5 stages to build CRM such as the recognition of the needs of CRM establishment, the establishment of CRM integrated database, the establishment of customer analysis and marketing strategy through data mining, the practical use of customer analysis through data mining and the implementation of response analysis and close loop process. Through the case study of leading companies, CRM is needed in types of businesses where the companies constantly contact their customers. To meet their needs, they assertively analyze their customer information. Through this, they develop their own CRM programs personalized for their customers to provide high quality service products. For customers helping them make profits, the VIP marketing strategy is conducted to keep the customers from breaking their relationships with the companies. Through continuous management, CRM should be executed. In other words, through customer segmentation, the profitability for the customers should be maximized. The maximization of the profitability for the customers is the key to CRM. These are the success factors of the CRM of the distributors in Korea. Firstly, the top management's will power for CS management is needed. Secondly, the culture across the company should be made to respect the customers. Thirdly, specialized customer management and CRM workers should be trained. Fourthly, CRM behaviors should be developed for the whole staff members. Fifthly, CRM should be carried out through systematic cooperation between related departments. To make use of the case study for CRM, the company should understand the customer and establish customer management programs to set the optimal CRM strategy and continuously pursue it according to a long-term plan. For this, according to collected information and customer data, customers should be segmented and the responsive customer system should be designed according to the differentiated strategy according to the class of the customers. In terms of the future CRM, integrated CRM is essential where the customer information gathers together in one place. As the degree of customers' expectation increases a lot, the effective way to meet the customers' expectation should be pursued. As the IT technology improved rapidly, RFID (Radio Frequency Identification) appears. On a real-time basis, information about products and customers is obtained massively in a very short time. A strategy for successful CRM promotion should be improving the organizations in charge of contacting customers, re-planning the customer management processes and establishing the integrated system with the marketing strategy to keep good relation with the customers according to a long-term plan and a proper method suitable to the market conditions and run a company-wide program. In addition, a CRM program should be continuously improved and complemented to meet the company's characteristics. Especially, a strategy for successful CRM for the medium and small sized distributors should be as follows. First, they should change their existing recognition in CRM and keep in-depth care for the customers. Second, they should benchmark the techniques of CRM from the leading companies and find out success points to use. Third, they should seek some methods best suited for their particular conditions by achieving the ideas combining their own strong points with marketing. Fourth, a CRM model should be developed that will promote relationship with individual customers just like the precedents of small sized businesses in Switzerland through small but noticeable events.