• 한국광학회지
• /
• 제18권3호
• /
• pp.179-184
• /
• 2007

본 논문은 가시광선 반사 스펙트럼으로부터 피부조직의 광학적, 구조적 특성을 역 추출하는 알고리즘에 대한 연구를 다룬다. 본 연구에서는 유전알고리즘을 사용한 기존의 역 추적 최적화 알고리즘에 파장 선택법과 심플렉스법을 추가하여 알고리즘의 최적화 능력을 개선하였다. 파장 선택법은 기존 알고리즘에 사용된 135개의 파장 중 10개의 유효 파장만을 사용한 결과 계산시간이 83% 감소하였다. 심플렉스법을 사용해 유전알고리즘으로 얻은 근사적인 탐색 점으로부터 재 탐색을 수행하였고, 이를 통해 얻은 탐색 점의 SSE(sum of square error)는 기존 유전알고리즘 만으로 얻은 탐색 점이 가지는 SSE의 0.64%였다. 본 연구의 모델링 결과를 통해 개선된 알고리즘이 기존 알고리즘에 비해 빠르고 정확한 해를 찾는다는 것을 확인할 수 있었다.

• 한국음향학회지
• /
• 제38권2호
• /
• pp.177-183
• /
• 2019

본 논문에서는 수동 선배열 소나의 저주파 영역에서 수신된 표적 신호로부터 간섭신호를 분리해 내기 위해 독립성분분석 알고리즘을 적용하는 방안을 제안하고 기존 알고리즘들의 성능을 비교해 보았다. 저주파 대역 신호의 경우 비교적 넓은 방위로부터 수신되기 때문에 인접 빔 신호를 관측신호로 활용하여 독립성분분석을 수행할 수 있다. 신호분리에 사용한 독립성분분석 알고리즘은 FastICA(Fast Independent Component Analysis), NNMF (Non-negative Matrix Factorization), JADE (Joint Approximation Diagonalization of Eigen-matrices)이다. 실측 선배열 수동소나신호를 이용하여 독립성분분석을 수행한 결과 제안한 방법으로 간섭신호분리가 가능함을 확인하였으며, JADE 알고리즘의 신호 분리 성능이 가장 우수한 것으로 나타났다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.755-767
• /
• 2020

A significant development has been made on a new fatigue damage model applicable to Gaussian wide band stress response spectra using numerical approximation methods such as data processing, time simulation, and regression analysis. So far, most of the alternative approximate models provide slightly underestimated or overestimated damage results compared with the rain-flow counting distribution. A more reliable approximate model that can minimize the damage differences between exact and approximate solutions is required for the practical design of ships and offshore structures. The present paper provides a detailed description of the development process of a new fatigue damage model. Based on the principle of the Gaussian wide band model, this study aims to develop the best approximate fatigue damage model. To obtain highly accurate damage distributions, this study deals with some prominent research findings, i.e., the moment of rain-flow range distribution MRR(n), the special bandwidth parameter μk, the empirical closed form model consisting of four probability density functions, and the correction factor QC. Sequential prerequisite data processes, such as creation of various stress spectra, extraction of stress time history, and the rain-flow counting stress process, are conducted so that these research findings provide much better results. Through comparison studies, the proposed model shows more reliable and accurate damage distributions, very close to those of the rain-flow counting solution. Several significant achievements and findings obtained from this study are suggested. Further work is needed to apply the new developed model to crack growth prediction under a random stress process in view of the engineering critical assessment of offshore structures. The present developed formulation and procedure also need to be extended to non-Gaussian wide band processes.

• Wind and Structures
• /
• 제34권1호
• /
• pp.59-72
• /
• 2022

In this work the numerical results of the flow around a 5:1 rectangular cylinder at Reynolds numbers 3 000 and 40 000, zero angle of attack and smooth incoming flow condition are presented. Implicit Large Eddy Simulations (ILES) have been performed with a high-order accurate spatial scheme and an implicit high-order accurate time integration method. The spatial approximation is based on a discontinuous Galerkin (dG) method, while the time integration exploits a linearly-implicit Rosenbrock-type Runge-Kutta scheme. The aim of this work is to show the feasibility of high-fidelity flow simulations with a moderate number of DOFs and large time step sizes. Moreover, the effect of different parameters, i.e., dimension of the computational domain, mesh type, grid resolution, boundary conditions, time step size and polynomial approximation, on the results accuracy is investigated. Our best dG result at Re=3 000 perfectly agrees with a reference DNS obtained using Nek5000 and about 40 times more degrees of freedom. The Re=40 000 computations, which are strongly under-resolved, show a reasonable correspondence with the experimental data of Mannini et al. (2017) and the LES of Zhang and Xu (2020).

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3813-3820
• /
• 2014

최근 전기 사용량이 증가하면서 전력수요와 공급능력의 불균형으로 인하여 전력예비율은 점차 감소되고 있으며, 전력 공급의 신뢰성도 떨어지고 있다. 이러한 배경 하에 전기저장장치(Battery Energy Storage System)는 수요관리의 유력한 수단 가운데 하나로써 중요성이 점차 부각되고 있다. 하지만, 이차전지를 이용한 전기저장장치는 아직 고가이므로 전력계통에 도입하여 운용하기 위해서는 경제성 평가가 필수적이다. 따라서, 본 논문에서는 전력회사용 BESS의 경제성평가를 위하여 BESS를 고려한 전원베스트믹스와 축사근사법을 이용하여, BESS의 도입 전 연간 운용비용과 BESS의 도입 후 연간 운용비용을 비교하여 최적의 BESS 도입용량과 도입비용을 산정하는 알고리즘을 제안하였다. 또한, 수용가용 BESS의 경제성평가에서는 피크세이빙 및 부하평준화 기능을 통하여 수용가의 기본전기요금과 사용량전기요금을 감소시켜 최대한의 메리트를 추구하는 경제성평가 알고리즘을 제시하였다. 제안한 알고리즘을 이용하여, 모델 전력계통과 수용가(교육기관)를 대상으로 BESS의 경제성을 분석하여, 본 논문에서 제시한 알고리즘의 유용성을 확인하였다.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.98-106
• /
• 2021

본 연구에서는 해양플랜트의 플로트오버 설치작업을 위해 개발된 능동형 갑판 지지 프레임 (Deck support frame, DSF)의 구조설계에 대해 다양한 실험계획법을 이용한 민감도해석의 비교연구를 수행하였다. 능동형 DSF의 주요 구조부재의 두께 치수 변수는 설계인자로 고려하였고, 응답치는 중량과 강도성능으로부터 선정하였다. 민감도해석의 비교연구에 사용한 실험계획법은 직교배열설계법, Box-Behnken 설계법 그리고 Latin hypercube 설계법이다. 실험계획법의 설계공간 탐색의 근사화 성능을 평가하기 위해 반응표면법을 각 실험계획법 별로 생성하여 근사화 정확도 특성을 검토하였다. 또한 최상설계안의 결과로부터 실험계획법의 특성에 따른 수치계산 비용, 중량감소 효과 등과 같은 설계향상 효과를 비교하였다. 능동형 DSF의 구조설계에 대해 직교배열설계법이 가장 향상된 결과를 나타내었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.2831-2847
• /
• 2017

In this paper, a joint destination-relay selection and antenna mode selection scheme for full-duplex (FD) relay network is investigated, which consists of one source node, N FD amplify-and-forward (AF) relays and M destination nodes. Multiple antennas are configured at the source node, and beamforming technique is adopted. Two antennas are employed at each relay, one for receiving and the other for transmitting. Only one antenna is equipped at each destination node. In the proposed scheme, the best destination node is firstly selected according to the direct links between the source node and destination nodes. Then the transmit and receive mode of two antennas at each relay is adaptively selected based on the relaying link condition. Meanwhile, the best relay with the optimal Tx/Rx antenna configuration is selected to forward the signals. To characterize the performance of the proposed scheme, the closed-form expression of the outage probability is derived; meanwhile, the simple asymptotic expressions are also obtained. Our analysis shows that the proposed scheme obtains the benefits of multi-relay diversity and multi-destination diversity. Moreover, extra space diversity in the medium SNR region can be achieved due to the antenna selection at the relay. Finally, Monte-Carlo simulations are provided to consolidate the analytical results, and show the effectiveness of the proposed scheme.

• 산업기술연구
• /
• 제20권A호
• /
• pp.211-218
• /
• 2000

It is desirable but difficult to predict springback quantitatively and accurately for successful tool and process design in sheet stamping operations. The result of springback analysis by the finite element method (FEM) is sensitively influenced by numerical factors such as blank element size, number of integration points, punch velocity, contact algorithm, etc. In the present work, a parametric study by Taguchi method is performed in order to evaluate the influence of numerical factors on the result of springback analysis quantitatively and to obtain the combination of numerical factors which gives the best approximation to experimental data. Since springback is determined by the residual stress after forming process, it is important to evaluate stress distribution accurately. The oscillation in the time history curve of stress obtained by the dynamic-explicit finite element method says that the stress solution at termination time is in very unstable state. Therefore, a variability study is also carried out in this study in order to assess the stability of implicit springback analysis starting from the stress solution by explicit forming simulation. The U-draw bending process, one of the NUMISHEET '93 benchmark problems, is adopted as an application model because it is most popular one for evaluating the springback characteristic.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.19-27
• /
• 2005

As three-dimensional range scanners make large point clouds a more common initial representation of real world objects, a need arises for algorithms that can efficiently process point sets. In this paper, we present a method for extracting smooth surfaces from dense point clouds. Given an unorganized set of points in space as input, our algorithm first uses principal component analysis to estimate the surface variation at each point. After defining conditions for determining the geometric compatibility of a point and a surface, we examine the points in order of increasing surface variation to find points whose neighborhoods can be closely approximated by a single surface. These neighborhoods become seed regions for region growing. The region growing step clusters points that are geometrically compatible with the approximating surface and refines the surface as the region grows to obtain the best approximation of the largest number of points. When no more points can be added to a region, the algorithm stores the extracted surface. Our algorithm works quickly with little user interaction and requires a fraction of the memory needed for a standard mesh data structure. To demonstrate its usefulness, we show results on large point clouds acquired from real-world objects.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3585-3601
• /
• 2016

The error rate performance of circularly distributed antenna system is studied over Nakagami-m fading channels, where a dual-channel receiver is employed for the quadrature phase shift keying signals detection. To mitigate the Co-Channel Interference (CCI) caused by the adjacent cells and to save the transmit power, this work presents remote antenna unit selection transmission based on the best channel quality and the maximized path-loss, respectively. The commonly used Gaussian and Q-function approximation method in which the CCI and the noise are assumed to be Gaussian distributed fails to depict the precise system performance according to the central limit theory. To this end, this work treats the CCI as a random variable with random variance. Since the in-phase and the quadrature components of the CCI are correlated over Nakagami-m fading channels, the dependency between the in-phase and the quadrature components is also considered for the error rate analysis. For the special case of Rayleigh fading in which the dependency between the in-phase and the quadrature components can be ignored, the closed-form error rate expressions are derived. Numerical results validate the accuracy of the theoretical analysis, and a comparison among different transmission schemes is also performed.