• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.27-31
• /
• 1996

• Proceedings of the Microbiological Society of Korea Conference
• /
• 1999.04a
• /
• pp.52.2-52.2
• /
• 1999

• Explosives and Blasting
• /
• v.29 no.2
• /
• pp.13-31
• /
• 2011

Air deck charge blast methods have been applied to improve the fragmentation in open cut bench blastings for mining developments. However, during large scale bench blasting operations, there exist some problems such as boulder productions due to explosive charge concentration. Especially, in case of lime stone mining, when air deck method is applied, there has been unintentionally concentrated on charging because the inside holes are often broken by erosion and decomposition. In this study, compared with general blasting, air deck blasting has been focused in lime stone mining. In other to maximize its efficiency, inside hole was examined by endoscope in advance and deck charge using air tube was applied to the section in which concentration might be taken place. Blasting efficiency, fragmentation, charging reduction rate, and total working hours (from charging to blasting) were the main object for comparing, and as a result, air deck was more efficient then the general blasting in all aspects except total working hours.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.1
• /
• pp.18-26
• /
• 2017

In a previous study, we assessed the feasibility of ferric chloride ($FeCl_3$) as a washing agent in bench-scale in-situ soil washing to remove Pb from agricultural paddy soil. Herein is a subsequent study to evaluate variations in soil properties after $FeCl_3$ soil washing in terms of fractionation and bioavailability of Pb and chemical properties of the soil. After soil washing, the soil pH decreased from 4.8 to 2.6 and the exchangeable fractions of Pb in the soil increased from 12 mg/kg to 15 mg/kg. Variations in the Pb fractionation of the soil increased Pb bioavailability by almost three-fold; however,the base saturation decreased by 75%. The concentrations of total nitrogen and available phosphate were similar before and after soil washing. The available silicate concentration significantly increased after soil washing but was two times lower than that of soil washed with HCl, which is widely used as a washing agent. This indicates that $FeCl_3$ can be an acceptable washing agent that protects the soil clay structure. The results suggest that soil amendment, such as liming, is needed to recover soil pH, reduce mobility of Pb, and provide exchangeable bases of Ca, Mg, and K as essential elements for the healthy growth of rice plants in reused soil that has been washed.

• Tunnel and Underground Space
• /
• v.20 no.1
• /
• pp.15-27
• /
• 2010

Geo-hazard shows a rapid increasing tendency with establishment of frequent great slopes in various construction sites, especially in the unfavorable topographic condition in which about 70% of the surface is covered by the mountainous area. An repeatedly taking place on the heavy rain season is accompanied by a large scale of rockfall, and causes great damage to an individual as well as a property. Even though lots of field studies and fundamental studies have been performed to reduce this hazard, however, an essential study on the mechanism of the rockfall should be limited to the conventional studies on the slope reinforcement and/or the rockfall risk analysis. In this study, the mechanism of rockfall depending on the morphologic characteristics of slope has been simulated numerically with the PFC2D, one of the discrete element programs. For analyzing its mechanism, the input parameters relating to the slope such as surface condition, gradient, number of benches, bench gradient, and the ratio of bench width to rockfall size were taken into consideration.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.611-620
• /
• 1997

The history of Tidal Bench Mark(TBM) at four major tide observation stations on the the Korea West Coast is reviewed. The data concerned with the local mean sea level(LMSL), the datum level(DL), and TBM is collected and checked. The values of LMSL surveyed by Rural Development Corporation(RDC), Office of Hydrographic Affair(OHA), and Office of Port Affair(OPA) are compared so that their unbiased MSLs at four stations are determined. Kriging model is introduced to estimate the design levels for tide; DL, MSL, and high water spring tide(HWOST). The estimated design level is well fitted with the sample data. The value of the identified drifts increase with the latitude. The estimated semi-variograms ${\gamma}(h)$ show self similarity. The values of the ${\gamma}(h)$ for DL and HWOST are 0.005 times as much as the values of ${\gamma}(h)$ of MSL.

• Journal of Practical Engineering Education
• /
• v.7 no.1
• /
• pp.25-30
• /
• 2015

Virtual reality is a combination of various studies, such as programming, simulation, and computer graphics. This type of new cultural paradigm requires novel concept of contents development and information exchange. This research uses 3D virtual reality technology in new equipment called I-Bench Mobile which let user to interact with the equipment for completing furniture disposition task. The simulation is manufactured in 3D with application of physics, and the ultimate goal of it is to increase customers' satisfaction by allowing them to enjoy snap shot function for arranging furniture at exact desired place. This research requires not only coding techniques but also educating process in both engineering and art, such as computer science, media art design, and visual communication; therefore, the development of software by facilitating Virtual/Augmented Reality technology in this research is a good example of fusion IT technique education.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.97-105
• /
• 2007

This study was conducted to compare the performances of acidogenic fermentation and hydrogen fermentation using bench-scale leaching-bed reactors for organic solid waste. Acidogenic fermenters were operated with dilution rates (D) of 2.0, 3.0 and $4.0d^{-1}$ after employing anaerobic sludge and hydrogen fermenters were operated with D of 2.0, 4.0 and $6.0d^{-1}$ after employing heat-treated anaerobic sludge. The highest chemical oxygen demand (COD) conversion efficiency (56.2%) was obtained in acidogenic fermentation with D of $3.0d^{-1}$. Only volatile fatty acid (VFA) was produced as a metabolite. On the other hand, hydrogen fermentation did not show higher COD conversion efficiency (49.3%) than acidogenic fermentation, but it produced hydrogen gas (5.1% of total COD) which was a clean and environmentally friendly fuel with a high energy yield. Therefore, either acidogenic fermentation or hydrogen fermentation could be applied to organic solid waste depending on the purpose of treatment, which could maximize the economics of anaerobic treatment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.52-61
• /
• 2015

Personal distance is one of the basic and important concepts in the field of Environmental Psychology in influencing personal space, visible or invisible territoriality and psychological carrying capacity of contemporary urban dwellers. This study aims to analyze the bench users' behaviour and personal distances in urban parks for the first time in Korea, one of the representative landscape spaces in urban areas. For these purposes, this study has adopted a blind observation and pictorial analysis for bench users in Yeouido Park in Seoul. The main results of this study show that the average interpersonal distance between female and male(intimate relationship) is 47.5cm, the distance between female and female is 53.2cm, and the distance between male and male is 70.3cm. These results mostly support the previous western study results, but the interpersonal space and territoriality of Koreans in urban parks may be smaller than that for western societies.

• International Journal of Automotive Technology
• /
• v.3 no.1
• /
• pp.33-40
• /
• 2002

Increasingly stringent emission regulations of EU and CARB (California Air resource Board) require mandatory OBD (On Board Diagnostics) far the catalytic converters of a vehicle. It demands that MIL(Malfunction Indication Light) should be tuned on to inform the driver of catalytic converter failures. Currently dual oxygen sensor method Is widely used for the converter OBD. However, since it works only alter converter light-off, it has a serious limitation when applied to TLEV or more stringent emission regulations where more than 85% of total emission is coming out before converter light-off. In addition, a recent development in catalyst material. coating technology and additive catalysts leads to a much improved OSC (Oxygen Storage Capacity) after converter light-off, current methods are very difficult to determine levels of converter aging. Therefore, it is desired to develop an OSC detecting method before converter light-off to diagnose converter failures with higher reliability. In this study, OSCs of converters are measured by an absolute measuring method and a dynamic measuring method, and some of fundamental ideas are suggested about converter OBD before converter light-off. The converters are aged with two different aging methods; those are a furnace aging and an engine bench aging: to represent aging conditions in actual field applications. Dual oxygen sensor method at the lower temperature than light-off is also studied at a model gas bench with the converters. It is fecund that there is a certain point in temperature lower than light-off where difference due to aging level becomes maximum, thus a proper dynamic method to effectively monitor catalytic converters could be implemented fur the range lower than light-off temperatures. With this result, the aging level of converters is examined at an engine bench.