• Korean Journal of Poultry Science
• /
• v.35 no.4
• /
• pp.327-333
• /
• 2009

In Korea chicken meat price is not determined in the auction markets, but it is artificially calculated using the live chicken price of one day before, transporting cost, converting rate of live chicken into carcass, and slaughtering cost. This calculated price is published through the mass media and used as the base for chicken meat transaction. By the way, since 85% of the Korean broiler industry is composed by the integrated system, the live chicken price is nothing to do with ex-factory price of chicken meat produced by the integrators. Under this pricing system, when we estimate the margin of the chicken meat through the marketing process, the margin of the integrator is fluctuated by the live chicken price of one day before, which is nothing to do with integrators; When the live chicken price is low, the margin of the integrators is low, but the margin of the selling agencies' is relatively high. On the contrast, when the live chicken price is high, the margin of the integrators is high, but the selling agencies' margin will be relatively low, because consumer's price could not be increased in parallel with increase of the live chicken price. Accordingly, the ex-factory price of chicken meat determined using the production cost of live chicken and slaughtering cost of the integrator by adding resonable margin of the integrator should be determined and published, so that it could be used for chicken meat transaction. In Japan the Zen-Noh Chicken Foods Corporation announce the ideal piece of chicken every morning, and all the transactions of the chicken meat will be determined based on this price. In Korea, it will be desirable to make bench marking from Japanese case, in other words the NH could announce the ideal price of chicken meat every morning, so that it would be the base price of chicken meat transaction. Even though the market share of the NH is less than 5%, its publicity should be accepted, since it is a subsidiary of the National Agricultural Cooperative Federation of Korea.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.1
• /
• pp.23-31
• /
• 2011

Domestic dairy industry is now standing at the crossroad for planning next fifty years, mainly because economic and environmental situations surrounding Korean peninsula are fast changing. For the aspects of dairy consumption, fresh milk consumed less, while consumption of the other milk and dairy products is slightly increasing every year. In 2010, it is approximately estimated that 1,939,000 tons of raw milk was used and the supply would be short by about 35,000 tons, based on the amounts in the previous year. Currently, multilateral negotiations against US and EU are underway. When it will be in effect in the future, significant damage would be expected in the dairy and livestock sectors, leading to cut domestic milk supply. Quality of farm-gate milk is graded as 1A on average 90% or more, loaded with very low in microbial and somatic cell counts. Therefore, policy implications have to be placed toward switch currently the UHT processing method to Pasteurization or the LTLT technology, by which natural flavors and nutrients in milk mostly remain after heat treatment. Domestic cheese products comprise only 10% and the rest is occupied by the various kinds of imported natural products. The market size keeps increasing up to 65,423,000 tons last year. When it comes to vitalization of our natural cheese industry, cheese whey, which is a main by-product in cheese manufacture, is a critical issue to be solved and also "On-Farm Processing" would be combined with a growth of big dairy companies when few immediate issues among the relevant regulations will be eased and alleviated in the near future. Fermented milk market is recorded as a single area of gradual increase in the past 10 years, Korea. Fermented yogurts with health claims targeted stomach, liver, and intestine are popular and has grown fast in sales amounts. In this context, researches on beneficial probiotic lactic acid bacteria are one of the important projects for domestic milk and dairy industries. Labelling regulations on efficacy or health-promoting effects of functional dairy products, which is the most important issue facing domestic dairy processors, should be urgently examined toward commercial expression of the functionality by lawful means. Colostrum, a nutrition-rich yellowish fluid, is roaded with immune, growth and tissue repair factors. Bovine colostrum, a raw material for immune milk preparations and infant formula, can be used to treat or prevent infections of the gastrointestinal tract. Nanotechnology can be applied to develop new milk and dairy products such as micro-encapsulated lactase milk for consumers suffering lactose intolerance. Raw milk is suggested to be managed by its usage in the processing line because imbalance of supply and demand is structural problem in every country and thus the usage systems as in the advanced dairy countries is worth of bench-marking to stabilize milk supply and demand. Raw milk produced is desirable to divide into the three parts; domestic, import, and buffering purposes. It is strongly recommended that a domestic dairy control center as an institutional framework should be urgently established as is Dairy Board in New Zealand and Australia. Lastly, government policy should be directed to foster the highly-educated people who are majoring in Dairy Sciences or working in the dairy industry by means of financial support in studying and training abroad as well.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2162-2176
• /
• 1971

From the ancient times our forefathers settled down in this peninsular and cultivated the hills and waste-lands into fields. Instead of fertilizing the lands they moved to find other fertile lands and lived a feudal life of agriculture and various machines played a main role in the land reclamation. The best method of land clearing, the time and efficiency in the operation and the effect of growing crops should sysematically analized prior to the time of 3rd Five-year Economic Development(1972-1976) in order to cultivated 210,000 ha of waste-land or the modernization of our country. The present study was investigated to find out a new working-system of mechanical land clearing and development of fertile soil. The results are as follows: 1) The land reclamation in natural slope is much more encourageable in land clearing and farming when the slope is below ten grades than bench terrace. 2) Weeds were mixed with soil in the land clearing work in order to supply organic materials and to make soil swollen instead of burning of just removing. 3) The equipments such as bulldozers, harrows, power tillers and so on should be prepared in order to do a systematic work in the land clearing. 4) The work of pulling-up roots is dependent upon the forms of roots spreading under the ground. The work of the pulling-up the straight roots was most difficult. 5) The land clearing work of the wrinkled style blocks was easy in pulling up roots and in the time of first plowing. The harrowing work could also be simply done. 6) The amount of soil carried was $240m^3/10a$, 15.6% increased amount from the standard block, while the required time of clearing work was 2 hours 15 minutes 45 seconds/10a, the one third of time required for the standard block. 7) The time disc harrowing work increased 50%, or 15 minutes/10a compared to the harrowing work required in the cultivated soil. 8) The time of rotary tilling increased 2.4 times or 1 hour 47 minutes 43 seconds/10a compared to the time required in the cultivated soil. 9) The reclamed land should be fertilized according to the soil quality, especially added fertilizer should be more than 1,200kg/10a, limes 20kg/10a. In order to produce added fertilizer grass fields should be needed. 10) The experiment of pasture growing is now progressing and therefore the effect of land clearing and the degree of developed soil will be investigated before long.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Archives of design research
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2000

The purpose of this study is to find out what is the preference of users according to the location of benches at urban community parks. This location of benches is seperated into 4 patterns according to arranging pattern of water space, a walk, pergola and shelter, greenspace. To investigate the visual preference is examined by analyzing visual volume of 4 patterns. Results are as follows; 1. Factor analysis by the total data showed that 5 factors explain 60.40 percent of total variance of the location of bench visual character. They were classified by the sensitive factor, visual factor, physical-individual factor, distinct factor, density factor. Among 5 factors, the sensitive factor which represented psychological reaction was appreciated to be highest. 2. Most of 20 items showed the following scores of mean values in sementic differential experiment : Spot 1->Spot 4-> 2-> 3. The mean values between arrangement place locational differences showed significantly, that could explain to be a violent contrast between the natural factors(weater space, green space, etc) and the artificial factors (around of pergola, shelter, etc)

• The Korean Journal of Food And Nutrition
• /
• v.25 no.3
• /
• pp.570-578
• /
• 2012

Compound K(ginsenoside M1) is one of saponin metabolites and has many benefits for human health. This study was to investigate Compound K produced from ginseng crude saponin extract with commercial cellulolytic complex enzyme(cellulase, ${\beta}$-glucanase, and hemicellulase) obtained from Trichoderma reesei. The effect factors(temperature, pH, ginseng crude saponin extract and enzyme concentration, and reaction time) on production of Compound K from ginseng crude saponin extract were determined by one factor at a time method. The selected major factor variables were ginseng crude saponin extract of 2%(w/v), enzyme of 7%(v/v), reaction time of 48 hr. Based on the effect factors, response surface method was proceeded to optimize the enzymatic bioconversion conditions for the desirable Compound K production under the fixed condition of pH 5.0 and $50^{\circ}C$. The optimal reaction condition from RSM was ginseng crude saponin extract of 2.38%, enzyme of 6.06%, and reaction time of 64.04 hr. The expected concentration of Compound K produced from that reaction was 840.77 mg/100 g. Production of Compound K was 1,017.93 mg/100 g and 862.31 mg/100 g, by flask and bench-scale bioreactor($2.5{\ell}$) system, respectively.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.328-336
• /
• 1999

A green microalga, Chlorella vulgaris UTX 259, was cultivated in a bench-scale raceway pond. During the culture, 15%(v/v) $CO_2$ was supplied and industrial wastewater discharged from a steel-making plant was used as a culture medium. In a small scale culture bottle, the microalga grew up to 1.8 g $dm^{-3}$ of cell concentration and ammonia was completely removed from the wastewater with an yield coefficient of 25.7 g dry cell weight $g^{-1}\;NH_3-N$. During the bottle-culture, microalga was dominant over heterotrophic microorganisms in the culture medium. Therefore, the amount of carbon dioxide fixation could be estimated from the change of dry cell weight. In a semi-continuous operation of raceway pond with intermittent lighting (12 h light and 12 h dark), increase of dilution rate resulted in increase of the ammonia removal rate as well as the $CO_2$ fixation rate but the ammonia removal efficiency decreased. Ammonia was not completely removed from the medium (wastewater) of raceway pond which was operated in a batch mode under a light intensity up to 20 klux. The incomplete removal of ammonia was believed due to insufficient light supply. A mathematical model, capable of predicting experimental data, was developed in order to simulate the performance of the raceway pond under the light intensity of sun during a bright daytime. Simulation results showed that the rates of $CO_2$ fixation and ammonia removal could be enhanced by increasing light intensity. According to the simulation, 80 mg $dm^{-3}$ of ammonia in the medium could be completely removed if the light intensity was over 60 klux with a continuous lighting. Under the optimal operating condition determined by the simulation, the rates of carbon dioxide fixation and ammonia removal in the outdoor operation of raceway pond were estimated as high as $24.7 g m^{-2} day^{-1}$ and $0.52 g NH_3-N m^{-2} day^{-1}$, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.85-97
• /
• 2007

Statement of problem: Recently, anodic oxidation of cp-titanium is a popular method for treatment of titanium implant surfaces. It is a relatively easy process, and the thickness, structure, composition, and the microstructure of the oxide layer can be variably modified. Moreover the biological properties of the oxide layer can be controlled. Purpose: In this study, the roughness, microstructure, crystal structure of the variously treated groups (current, voltage, frequency, electrolyte, thermal treatment) were evaluated. And the specimens were soaked in simulated body fluid (SBF) to evaluate the effects of the surface characteristics and the oxide layers on the bioactivity of the specimens which were directly related to bone formation and integration. Materials and methods: Surface treatments consisted of either anodization or anodization followed thermal treatment. Specimens were divided into seven groups, depending on their anodizing treatment conditions: constant current mode (350V for group 2), constant voltage mode (155V for group 3), 60 Hz pulse series (230V for group 4, 300V for group 5), and 1000 Hz pulse series (400V for group 6, 460V for group 7). Non-treated native surfaces were used as controls (group 1). In addition, for the purpose of evaluating the effects of thermal treatment, each group was heat treated by elevating the temperature by $5^{\circ}C$ per minute until $600^{\circ}C$ for 1 hour, and then bench cured. Using scanning electron microscope (SEM), porous oxide layers were observed on treated surfaces. The crystal structures and phases of titania were identified by thin-film x-ray diffractmeter (TF-XRD). Atomic force microscope (AFM) was used for roughness measurement (Sa, Sq). To evaluate bioactivity of modified titanium surfaces, each group was soaked in SBF for 168 hours (1 week), and then changed surface characteristics were analyzed by SEM and TF-XRD. Results: On basis of our findings, we concluded the following results. 1. Most groups showed morphologically porous structures. Except group 2, all groups showed fine to coarse convex structures, and the groups with superior quantity of oxide products showed superior morphology. 2. As a result of combined anodization and thermal treatment, there were no effects on composition of crystalline structure. But, heat treatment influenced the quantity of formation of the oxide products (rutile / anatase). 3. Roughness decreased in the order of groups 7,5,2,3,6,4,1 and there was statistical difference between group 7 and the others (p<0.05), but group 7 did not show any bioactivity within a week. 4. In groups that implanted ions (Ca/P) on the oxide layer through current and voltage control, showed superior morphology, and oxide products, but did not express any bioactivity within a week. 5. In group 3, the oxide layer was uniformly organized with rutile, with almost no titanium peak. And there were abnormally more [101] orientations of rutile crystalline structure, and bonelike apatite formation could be seen around these crystalline structures. Conclusion: As a result of control of various factors in anodization (current, voltage, frequency, electrolytes, thermal treatment), the surface morphology, micro-porosity, the 2nd phase formation, crystalline structure, thickness of the oxide layer could be modified. And even more, the bioactivity of the specimens in vitro could be induced. Thus anodic oxidation can be considered as an excellent surface treatment method that will able to not only control the physical properties but enhance the biological characteristics of the oxide layer. Furthermore, it is recommended in near future animal research to prove these results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.26-37
• /
• 2016

As activities and convenience of residents in outdoor spaces in apartment houses have been considered important, strategies for making outdoor spaces in apartment houses healing spaces have emerged as a major interest. The purpose of this study is to draw elements for planning healing to create healing spaces in collective housing areas and to present design guidelines. The findings of this study are as follows. Functional elements of a healing environment were classified into safe environment, therapeutic environment, ancillary environment, orientation-reinforcing environment, amenities, and social environment. Outdoor spaces in collective housing areas were divided into collective housing entrance areas, internal and external spread areas, outdoor activity areas, and areas by theme. First, collective housing entrance areas should be planned in such a manner that residents can feel the area is private and easy to recognize. Second, internal and external spread areas should be planned in such a manner that they are easy to access and communicate with neighbors. Third, outdoor activity areas should be divided into an open space, resting space, playing space, and sports space. Open spaces should be planned in such a manner that they can command a fine view and respect the privacy of nearby residents. Resting spaces should be equipped with a shelter that protects users from direct sunlight, rain, and snow as well as include a movable bench. Playing spaces should be built considering development of children's curiosity, adventurous spirit, character, stimulation, and physical health. Playing spaces should be designed in such a manner that roadways and sidewalks can be separated for safe traffic. Sport spaces should be planned in such a manner that they can be associated with a pavilion and trail that provide residents with an opportunity to communicate with each other and rest. Fourth, spaces by theme are classified into sense garden, therapeutic garden, experiential garden, and learning garden. Sense gardens are a small garden based on the five senses. Sense gardens should be designed in such a manner that they can improve users' mental and physical health through programs that stimulate the sense of sight, auditory sense, and olfactory sense. Therapeutic gardens should be designed in such a manner that they can provide a comfortable and relaxing space by minimizing noise. It is advisable for therapeutic gardens to be equipped with a medicinal herb garden, meditation garden, and sense garden. Experiential and learning gardens should be designed in such a manner that they can provide users with a space in which they can enjoy nature and leisure activities. It is advisable for experiential and learning gardens to be equipped with a tea garden, vegetable garden, and camping garden. Healing programs should be designed in such a manner that users can feel relaxed by providing a healing environment, making the most of the natural environment. Further research on evaluating whether the findings of this study are effective in healing in a qualitative and quantitative manner is needed.

• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.685-693
• /
• 2008

The rates of oxidative degradation of perchloroethene (PCE) and trichloroethene (TCE) using $KMnO_4$ solution were evaluated under the flow condition using a bench-scale transport experimental setup. Parameters which are considered to affect the reaction rates tested in this study were the contact time (or retention time), and the concentration of oxidizing agent. A glass column packed with coarse sand was used for simulating the aquifer condition. Contact time between reactants was controlled by changing the flow rate of the solution through the column. The inflow concentrations of PCE and TCE were controlled constant within the range of $0.11{\sim}0.21\;mM$ and $1.3{\sim}1.5\;mM$, respectively. And the contact time was $14{\sim}125$ min for PCE and $15{\sim}36$ min for TCE. The $KMnO_4$ concentration was controlled constant during experiment in the range of $0.6{\sim}2.5\;mM$. It was found that the reduction of PCE and TCE concentrations were inversely proportional to the contact time. The exact reaction order for the PCE and TCE degradation reaction could not be determined under the experimental condition used in this study. However, the estimated reaction rate constants assuming pseudo-1st order reaction agree with those reported based on batch studies. TCE degradation rate was proportional to $KMnO_4$ concentration. This was considered to be the result of using high inflow concentrations of reactant, which might be the case at the vicinity of the source zones in aquifer. The results of this study, performed using a dynamic flow system, are expected to provide useful information for designing and implementing a field scale oxidative removal process for PCE/TCE-contaminated sites.