• Korean Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.482-489
• /
• 2012

Visual monitoring is hard to apply on fish because they are living in a water system. To overcome this problem, acoustic telemetry, which is effective for underwater monitoring, is often used for studying fish behaviors, such as movement distance, route and patterns. In this study, in order to monitor the movement pattern of Squaliobarbus curriculus (family Cyprinidae), we used acoustic telemetry and identified the home range and movement distances. A total of nine individuals were released at two different locations: one is at the estuary barrage (Sc1~3) and the other is at the lower part of Baekjae Weir (Sc4~9), located in Geum River. Approximately, a 70 km section from the estuary barrage was investigated. Fish, which were released at the estuary barrage, utilized up to 12.7 km upstream as home range from the release site. At the lower part of Baekjae Weir, most of the fish moved and stayed within a 7.2 km downstream area, except for Sc6, which moved 53.4 km (linear maximum distance from release site) downstream from the release site. Relatively small sized fish (Sc7~9) did not show any movement. Accumulated movement distance significantly correlated with the standard length of S. curriculus ($r_s$=0.715, p=0.03). Moreover, the standard length of moving fish was significantly larger than that of not moving fish (Mann-Whitney U test, p=0.024). Therefore, the movement distance of S. curriculus has been correlated with fish size; movement distance was increased with the standard fish length. Although the sample size of monitored fish was small, various meaningful data were collected by acoustic telemetry. Consequently, this technique could be a method available for effectively monitoring the behavior and ecology of native Korean and endemic species.

• Korean Journal of Biological Psychiatry
• /
• v.6 no.2
• /
• pp.153-160
• /
• 1999

Animal models can provide a useful tool for the study of some aspects of psychiatric disorders and their treatment. The four criteria for the evaluation of animal models of psychiatric disorders are as following : 1) similarity of inducing conditions 2) similarity of behavioral state 3) common underlying neurobiological mechanisms 4) reversal by clinically effective treatment techniques. Several animal models have been proposed for schizophrenia : phenylethylamine model, L-dopa model, hallucinogen model, cocaine model, amphetamine model, phencyclidine model, noradrenergic reward system lesion model, reticular stimulation model, social isolation model, conditioned avoidance reaction, catalepsy test, paw test, self-stimulation paradigms, latent inhibition paradigms, blocking paradigms, prepulse inhibition of the startle reflex, rodent interaction, social behavior in monkeys, hippocampal damage, high ambient pressure, and models using selective breeding. Among them, animals with bilateral lesion of the hippocampus may provide an adequate animal model for several symptoms of schizophrenia, and ketamine model can reproduce negative symptoms and cognitive deficits as well as positive symptoms of schizophrenia. In conclusion, no model of schizophrenia is entirely representative of the disease, and findings gleaned from model systems must be cautiously interpreted. Furthermore, the process of developing and validating animal models must work in concert with the process to identify reliable measures of human phenomenology.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1991-2001
• /
• 2009

This study provides basic information that is needed to build marketing strategies related to consumer brand-switching, through the investigation of consumer motivations for brand-switching, as determined by the types of fashion products. The study was implemented by a descriptive survey method using a questionnaire. The survey was conducted during the period of May $11^{th}$ through July $5^{th}$ 2008. A total of 184 completed responses were analyzed. All respondents were from the Seoul area and between the ages of 20 and 31. Factor analysis and Cronbach's alpha coefficients, one-way ANOVA and Duncan test were employed for the analysis of data. Significant differences were found in brand-switching motives according to the types of fashion products. For clothing, shift behavior occurred more often in conjunction with the attributes of the products itself, such as design, color, price, size, and fiber content. In general, clothes more than shoes, were likely subject to brand-switching most often on the basis of situational factors. On the other hand, for shoes, more brand-switching activities occurred because of non-product attributes, such as discounts, coupons, desire for a change, and wearing of friends. In light of the results, there is a need to differentiate brand related marketing strategies with respect to clothing and shoes. For clothing, efforts focusing on the improvement of the product attributes will be more effective in minimizing brand-switching. There is also a need to improve instructions for increasing the product understanding of salespersons as well as the ability to give advice in accordance with personal consumer characteristics. With regard to shoes, greater efforts should be given to promotional activities, and the desire of consumers for a change in order to prevent brand-switching of customers.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.3
• /
• pp.31-49
• /
• 2002

The purpose of this study was to investigate discomforts and sexual life and to identify the relation between the discomforts and sexual life with low back pain. The data were collected from March 2 through July 31, 2001. Four hundred forty-two questionnaires were returned (response rate=88.0%). Analysis of the data was done with SPSS PC+ and use descriptive statistics, $x^2$-test, t-test, ANOVA. regression. The statistics shows that over than 80% of the adults experienced lumbago at least one time in their life, and Back pain is known as one of the most common complaints made by the patients of all ages in the general hospital or local medical clinics throughout. However, in certain case it leads to a chronic condition which can cause a great deal of problems in management and in financial burden to individuals and society. The result of this study was summarized as follows: 1) It appeared that regarding the distribution of gender, male was the higher(63.6%) then that of female, the portion of forties was 28.5%. Sitting for long time was 23.1% in men and 21.7% in women. Unknown reason including sexual behaviour was 12.9% in men and 15.5% in women. Patients treated medicine and physical therapy were 36.4%. In level of educational background, the rate of high school was 31.0%, technical college was 28.5%. The highest proportion by occupation was 18.3% of office workers, occupation posture was 41.9% of sitting. 2) Men(26.0%) and most of women(34.8%) were not satisfied in the explanation satisfaction rate of sex life concerned disease. 23.8% in men and 23.6% in women considered flexibility of waist good. Man(33.3%) and most of woman(35.0%) considered that Health education is necessary. 32.7% in men and 27.3% in women did't mind educator is whoever. Preventing of lower back pain(LBP) and proper Health education of sex life are demanded in daily life. 3) 58.0% of man and 64.0% of woman mostly had a posture which is man over woman. 28.5% in men and 27.8% in women considered that proper information finding of LBP and sex life was very few and few. 37.7% in men and 42.7% in women have acquired information about sex life flung their friends. 4) The number of sex life was decreased from 2.96 0.98 to 2.61 1.63 and also the time of sex life was decreased from 3.65 1.89 to 226 1.64. The satisfaction rate of sex life changed from 3.60 0.86 to 2.77 1.10. In the number of sex life, The non correct group was 2.62 1.91 and the correct group was higher in 2.68 1.65. In the time of sex life, The non correct group was 2.02 1.47 and the correct group was higher in 229 1.65. The satisfaction rate of sex life was 2.76 0.86 in non correct group and 2.88 1.10 in correct group. So there was a difference. 5) In the satisfaction rate of sex life, Men who have a lower back pain were higher than women and no attack group was higher than attack group. As they had many sex life, the satisfaction rate was higher significantly in statistics. As the time of sex life was short, the satisfaction rate was lower significantly in statistics. As the age was low, the demand rate of Health education was high and as means of patient who had a lower back pain was high, the demand rate of Health education was high. As the patient who had a lower back pain had a long married life, the demand rate of Health education was high and as education level was high, the demand rate of Health education was high. It is necessary to provide patients with conservative treatment, educational teaching, and training to prevent further injuries in the future. In general, it is important to educate the public how to prevent back injuries and how to treat themselves in an onset period to prevent further injuries sliding into a chronic state. Sexuality is an integral part of normal and healthy relationships, but patients are unable to enjoy sex because they are riot able to get into a comfortable position due to back pain. Many conditions of the spine can make certain positions uncomfortable. Health educator should make the education program of the discomforts and the sexual pattern for low back pain in workplace and/or hospital. Further study Is needed on how to integrate the educational program on sexuality into the total rehabilitation program.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1069-1078
• /
• 2008

The purposes of this study were to identify the consumer behavior using in campus specialty coffee shop and to establish the marketing strategies through Importance-Performance Analysis (IPA) of service quality. Questionnaires were distributed to 725 students at K University located in Masan, from April 23 to May 3, 2007. Finally, 621 questionnaires were included in the final analysis (response rate: 85.7%). For statistical analysis, SPSS (12.0) was used to conduct the descriptive analysis, t-test, factor analysis and reliability test. The results of this study were as follows. The average cost of using specialty coffee shop in campus was \ 2,096, the average staying time was 25.92 min and the average number of visits per month was 2.17 times. The importance level of 'employee's attitude', 'physical environment', 'sensory quality of coffee', 'beverage features', 'representativeness' were 3.88, 3.79, 3.73, 3.67, 3.28 points, respectively. Also, the performance level of 'sensory quality of coffee', 'beverage features', 'employee's attitude', 'physical environment', 'representativeness' were 3.13, 3.06, 3.05, 2.77, 2.61, respectively. The importance and performance levels of service quality of specialty coffee shop in campus were significantly different (p<.001). Establishment of marketing strategies for in campus speciality coffee shop was possible through the IPA of service quality. Strategies for improving customer satisfaction were to secure enough chairs/ tables, to procure comfortable chairs for customer and to ensure the quality of coffee bean and service of employee.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.664-672
• /
• 2004

Widespread popularity of wireless data communication devices, coupled with the availability of higher bandwidths, has led to an increased user demand for content-rich media such as images and videos. Since such content often tends to be private, sensitive, or paid for, there exists a requirement for securing such communication. However, solutions that rely only on traditional compute-intensive security mechanisms are unsuitable for resource-constrained wireless and embedded devices. In this paper, we propose a selective partial image encryption scheme for image data hiding , which enables highly efficient secure communication of image data to and from resource constrained wireless devices. The encryption scheme is invoked during the image compression process, with the encryption being performed between the quantizer and the entropy coder stages. Three data selection schemes are proposed： subband selection, data bit selection and random selection. We show that these schemes make secure communication of images feasible for constrained embed-ded devices. In addition we demonstrate how these schemes can be dynamically configured to trade-off the amount of ded devices. In addition we demonstrate how these schemes can be dynamically configured to trade-off the amount of data hiding achieved with the computation requirements imposed on the wireless devices. Experiments conducted on over 500 test images reveal that, by using our techniques, the fraction of data to be encrypted with our scheme varies between 0.0244％ and 0.39％ of the original image size. The peak signal to noise ratios (PSNR) of the encrypted image were observed to vary between about 9.5㏈ to 7.5㏈. In addition, visual test indicate that our schemes are capable of providing a high degree of data hiding with much lower computational costs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6521-6526
• /
• 2015

Background: This study aimed toanalyze the risk behavior for cervical cancer (CC) and the human papillomavirus (HPV) prevalence and resolution among women who received care through the private healthcare network of a municipality in southern Brazil. Materials and Methods: This descriptive and retrospective study was conducted with 25 women aged 20 to 59 years who received care through the private healthcare network and were treated at a specialty clinic in the period from January to December 2012 in a municipality in Northwest Parana, Southern Brazil. Data from medical records with cytological and HPV results were used. Following treatment, these women were followed-up and reassessed after 6 months. Data were statistically analyzed using the t-test and chi-squared test at a 5% significance level. Results: The mean age of the studied women was $27.8{\pm}7.75$ years old, and the majority were married, with paid employment and were non-smokers. The mean age at menarche was $13.0{\pm}0.50$ years old, and the mean age at first intercourse was $17.5{\pm}1.78$ years, with only 8.0% (2) initiating sexual activity at an age ${\leq}15$ years old. The majority had 1 to 2 children (60.0%), while 88.0% reported having had one sexual partner in their lifetime, and all the women were sexually active. A total of 68.0% used a hormonal contraceptive method. All the women had leukorrhea and pain and were infected by a single HPV type. Regarding the lesion grade, 80.0% showed high risk and 20.0% low risk. The most prevalent high-risk HPV strain was 16. Conclusions: These findings provide relevant information on HPV risk factors and infection, as well as the treatment and 6-month follow-up results, in economically and socially advantaged women with no traditional risk factors, corroborating previous reports that different risk factors may be described in different populations. Thus, this study reinforces the fact that even women without the traditional risk factors should undergo HPVmonitoring and assessment to determine the persistence of infection, promoting early diagnosis of the lesions presented and appropriate treatment to thus prevent the occurrence of CC.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.485-496
• /
• 2013

In recent years, frequent terror or military attacks by explosion or impact accidents have occurred. Examplary case of these attacks were World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. These attacks of the civil infrastructure have induced numerous casualties and property damage, which raised public concerns and anxiety of potential terrorist attacks. However, a existing design procedure for civil infrastructures do not consider a protective design for extreme loading scenario. Also, the extreme loading researches of prestressed concrete (PSC) member, which widely used for nuclear containment vessel, gas tank, bridges, and tunnel, are insufficient due to experimental limitations of loading characteristics. To protect concrete structures against extreme loading such as explosion and impact with high strain rate, understanding of the effect, characteristic, and propagation mechanism of extreme loadings on structures is needed. Therefore, in this paper, to evaluate the impact resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, impact tests were carried out on $1400mm{\times}1000mm{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PS), prestressed concrete with rebar (PSR, general PSC) specimens. According to test site conditions, impact tests were performed with 14 kN impactor with drop height of 10 m, 5 m, 4 m for preliminary tests and 3.5 m for main tests. Also, in this study, the procedure, layout, and measurement system of impact tests were established. The impact resistance capacity was measured using crack patterns, damage rates, measuring value such as displacement, acceleration, and residual structural strength. The results can be used as basic research references for related research areas, which include protective design and impact numerical simulation under impact loading.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.147-158
• /
• 2004

Laboratory dynamic tests are carried out to assess the liquefaction potential of saturated sands in most countries. However, simple results such as the maximum cyclic shear stress and the number of cycles at initial liquefaction are used in the experimental assessment of liquefaction potential, even though various results can be obtained from the dynamic test. In addition, it seemed to be inefficient because more than three dynamic tests with different stress ratio have to be carried out to draw a liquefaction resistance experimental curve. To improve the present assessment method fur liquefaction potential, a new critical resistible characteristic far soil liquefaction is proposed and verified through conventional cyclic triaxial tests with Jumunjin sand. In the proposed method, various experimental data such as effective stress path, stress-strain relationship, and the change of excess pore water pressure can be used in the determination of cumulative plastic shear strains at every 1/4 cycle. Especially, the critical cumulative plastic shear strain to initiate liquefaction can be defined in a specific point called a phase change point in the effective stress path and it can be calculated from a hysteric curve of stress-strain relationship up to this point. Through this research, it is found that the proposed cumulative plastic shear strain can express the dissipated energy to resist dynamic loads and consider the realistic soil dynamic behavior of saturated sands reasonably. It is also found that the critical plastic shear strain can be used as a registible index of soils to represent the critical soil dynamic state, because it seems to include no effect of large deformation.