• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.335-341
• /
• 1999

We fabricate acrylamide photopolymer as a holographic recording material and investigrate photobleaching characteristics. To explain the photobleaching kinetics of photopolymer we adopt two models of the Beer-Lambert law and optical transmittance based on rate equations obtained from a simplified energy-band model. The Beer-Lambert law is in good agreement with the experimental results in a first short-time region but not in long-time region. But the optical transmittance model based on rate equations explains the experimental results very well in both short-and long-time regions.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.4 no.1
• /
• pp.78-81
• /
• 1999

Light penetration depth in high-density Chlorella cultures can be successfully estimated by Beer-Lambert's law. The efficiency of light energy absorption algal cultures was so high that algal cells near the illuminating surface shade the cells deep in the culture. To exploit the potential of high-density algal cultures, this mutual shading should be eliminated or minimized. However, providing more light energy will not ease the situation and it will simply drop the overall light utilization efficiency.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.18-27
• /
• 2023

In this paper, the structural-thermal-optical performance analysis of the mirror was performed by setting the laser heat source as the boundary condition of the thermal analysis. For the laser heat source model, the Beer-Lambert model considering semi-transparent optical material based on Gaussian beam was selected as the boundary condition, and the mechanical part was not considered, to analyze the performance of only the mirror. As a result of the thermal analysis, thermal stress and thermal deformation data due to temperature change on the surface of the mirror were obtained. The displacement data of the surface due to thermal deformation was fitted to a Zernike polynomial to calculate the optical performance, through which the performance of the mirror when a high-energy laser was incident on the mirror could be predicted.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.243-244
• /
• 2003

오존은 매우 불안정한 물질로서, 기타의 환경 대기 가스 분석법에서와 같이 해당 성분의 측정기를 표준 가스로 교정한 후 분석할 수 없다. 이러한 이유로, 환경 대기 중의 오존을 분석하는 일반 분석기의 교정을 목적으로, 본 연구실에서는, 국가 일차 오존 표준분광기(O$_3$-SRP)를 제작하여 운영하고 있다. 운영되고 있는 $O_3$-SRP의 측정 원리는 자외선 흡광 광도법이며, 농도값의 결정은 순수하게 Beer-Lambert 법칙에 따른다. Beer-Lambert 법칙에 따라서 오존 농도를 절대적으로 측정하기 위해서는 몰 흡광계수, 광로의 길이, 투과도, 온도 및 압력을 정확히 측정하여야 한다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.31-37
• /
• 1998

We fabricated acrylamie photopolymer holographic recording materials by photopolymerization of acrylamide, and described hologram formation process. Light absorption and phtobleaching process by MB(methylene blue) dye and radical polymerization process due to TEA(triethanolamind) are explained in detail. We adopted the Beer-lambert law in order to explain the photobleaching kinetics. Dependencies of diffraction efficiency of the hologram on monomer amout and the exposure are investigated. The scattering effect caused by grain of polymer crystal, and fixing method are also illustrated.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.60-65
• /
• 2011

In order to maximize the performance of polymer nano-composites, it is essential to understand an effect of a dispersion state on material properties as well as to achieve highly dispersed composites. In this work, a simple quantitative approach to evaluate the degree of dispersion was suggested for carbon nanotube (CNT) embedded polymer nano-composites. Through UV-visible spectroscopy analysis, the transmittance of nano-composites was measured at various dispersion states and it was found that the transmittance reduced as the dispersion state of CNT improved. Based on the results, an effective concentration factor for quantitative evaluation of dispersion state was introduced into the Beer-Lambert transmittance law. The proposed method and parameter to evaluate the degree of dispersion were verified by analyzing the transmittances at different dispersion states of CNT, concentrations of CNT and sample thicknesses.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.118-124
• /
• 2017

Color rendering index (CRI) and luminous efficacy (LE) are two key performance factors of white LEDs (WLED). While most recent works in optics focus on methodology to improve these factors, little attention has been dedicated to chemical composition of materials. This paper studies the effect of $Sr_{2.4}1F_{2.59}B_{20.03}O_{74.8}:Eu_{0.12},Sm_{0.048}$ phosphor (SrSm), in terms of concentration and particle size on CRI and LE of 8500 K - WLEDs. Importantly, the molar mass of the componential ions in SrSm are calculated to shed light on the connection between the chemical composition of the material of interest and the performance of WLEDs. Results show that CRI can be improved to a value of around 86 by boosting red-light components in WLEDs, for all 3 major configurations: conformal, in-cup, and remote phosphor. CRI value tends to decrease with larger size of particles, while LE value goes in the reverse direction. On the other hand, both CRI and LE appear to be reduced at higher concentration of SrSm. This light attenuation is analyzed by using the Lambert-Beer law and Mie-scattering theory.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.603-608
• /
• 2003

Syndiotactic polystyrene (s-PS) presents a very complex polymorphic behavior depending on the sample preparation history and exhibits a solid-solid phase transition. Each different polymorphic structures of the s-PS sample were prepared by annealing the samples from room temperature to 220 $^{\circ}C$. The structural changes induced by annealing were investigated using FTIR and FT-Raman spectroscopy. Although the crystallization kinetics of s-PS are difficult to investigate with DSC due to its fast crystallization rate, it was possible to determine crystallinity changes in the s-PS sample using infrared characteristic peaks with Beer-Lambert's law.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.4
• /
• pp.36-44
• /
• 2009

Spray cross-section was measured by the Optical Line Patternator (OLP) and Optical Tomography at high ambient pressure. The laser line beam passed through the spray region, then Mie scattered signal and transmitted light were captured. The measured signal was processed to obtain a distribution of attenuation coefficient in spray cross-section. Beer-Lambert's law and mathematical reconstruction methods were used to reconstruct the distribution of attenuation coefficient. Spray became dense at high pressure and attenuation of scattered signal occurred seriously. OLP method, which uses Mie scattered signal, showed limit in compensating attenuation problem in dense spray region. Optical tomography reconstructed spray cross-section well, from transmission rate of light penetrating spray region.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.836-845
• /
• 2017

Gravimetric method is usually used to evaluate air-dry density, which is governing physical or mechanical properties of wood. Although it had high evaluation accuracy, the method is time consuming process. Thus, this study was conducted to estimate air-dry density of wood with high accuracy by using polychromatic X-ray and digital detector as alternative of gravimetric method. To quantify polychromatic X-ray projection for evaluating air-dry density, Lambert-Beer's law with the integral value of probability function was used. The integral value was used as weighting factor in the law, and it was determined by conducting simple test at various penetration depths and tube voltage. Mass attenuation coefficient (MAC) of wood also calculated by investigating polychromatic X-ray projection according to species, penetration depth and tube voltage. The species had not an effect on change of MAC. Finally, an air-dry density of wood was estimated by applying the integral value, MAC and Lambert-Beer's law to polychromatic X-ray projection. As an example, the relation of the integral value (${\alpha}$) according to penetration depth (t, cm) at tube voltage of 35 kV was ${\alpha}=-0.00091t{\times}0.0184$ while the regression of the MAC (${\mu}$, $cm^2/g$) was ${\mu}=0.5414{\exp}(-0.0734t)$. When calculation of root mean squared error (RMSE) was performed to check the estimation accuracy, RMSE at 35, 45 and 55 kV was 0.010, 0.013 and $0.009g/cm^3$, respectively. However, partial RMSE in relation to air-dry density was varied according to tube voltage. The partial RMSE below air-dry density of $0.41g/cm^3$ was $0.008g/cm^3$ when tube voltage of 35 kV was used. Meanwhile, the partial RMSE above air-dry density of $0.41g/cm^3$ decreased as tube voltage increased. It was conclude that the accuracy of estimation with polychromatic X-ray and digital detector was quite high if the integral value and MAC of wood were determined precisely or a condition of examination was chosen properly. It was seemed that the estimation of air-dry density by using polychromatic X-ray system can supplant the gravimetric method.