• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.250-250
• /
• 2019

현재 우리나라에서 이용하고 있는 소류사량 직접계측방법에는 Arnhem 소류사 채취기와 Helley-Smith 소류사 채취기 등이 있다. 하지만 이러한 방법은 현장에서 계측하기가 매우 어렵고 많은 비용과 인력, 시간이 소모되며 특히 연속적인 계측이 어려워 소류사량의 직접계측자료를 기초로 하는 연구는 거의 전무한 상태이다. 이에 대한 대안으로 최근 국내외에서는 마이크로폰을 내장한 금속관에 토사가 충돌 시 발생하는 음향데이터를 수집 및 분석하여 소류사량을 계측하는 간접계측방법 하이드로폰을 사용하고 있다. 하이드로폰 시스템의 대부분이 증폭채널방법을 사용하고 있는데 이러한 방법은 개별입자에 대한 음향특성을 반영하기에는 다양한 크기를 가지는 소류사 입자에 대한 음향신호를 하나의 임계치 기준으로 필터링 하기 때문에 한계가 있다. 즉 기존의 방법은 소류사량의 상대적인 크기만 추정할 수 있을 뿐 소류사량을 정량화할 수 없다. 따라서 본 연구는 소류사가 이동할 때 발생하는 충돌음향을 신호 처리하여 소류사량을 추정하는 계측기기인 하이드로폰을 이용하여 기존 소류사량의 계측 방법을 개선하기 위한 실험적 연구를 수행하였다. 실험은 하이드로폰을 적용한 수리모형 실험 장치를 구축하고 현장에서 취득한 시료 중 대표시료로 분류된 두 가지 입자에 대해서 수리 조건 변화에 따른 충돌음향을 계측 및 분석하였다. 연구결과 입자크기 및 수리조건 변화에 따른 하이드로폰의 인지특성을 파악할 수 있었고 소류사 충돌음과 연관성 높은 주파수 대역을 분리하여 소류사 충돌음을 판독할 수 있는 계측알고리즘을 제시하였다. 특히 본 연구에서 제안하는 하이드로폰 충돌음향 분석법 B-P Method는 낮은 유속과 작은 입경의 소류사의 조건일 때 타 방법에 비해 제안된 B-P Method가 높은 판독률을 보여주었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.375-379
• /
• 2008

In this paper, a 10N class liquid propellant rocket utilizing a dissolving reaction of hydrogen peroxide is constructed and tested. Through a series of designs, seven orifices with a diameter of 200 ${\mu}m$ and a nozzle with a neck of 2.5mm in diameter and area ratio of 2.56 were made. The platinum coated on Isolite was used for catalyst. 90wt% peroxide pressed at 20 bar by nitrogen gas was used for performance evaluation. The length of the catalyst bed and the load of platinum was taken as the parameters for this experiment. For the catalyst support length of 4cm loaded on 5wt% platinum, satisfactory $c^*$ efficiency and stable thrust was observed. The light weight body of the rocket was composed of aluminum. Rocket rose about 10m with relatively constant velocity in launching test.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.4
• /
• pp.16-25
• /
• 2019

Recently, due to labor shortages in rural areas within South Korea, the demand for upland-field machinery is growing. In addition, there is a lack of development of systematic performance testing of upland-field machinery. Thus, this study examined structural safety and drawbar pull based on soil properties, as a first step for systematic performance testing on the test bed. First, the properties of soil samples from 10 spots within the experimental site were examined. Second, the strain was measured and converted into stress on 8 points of an onion harvester that are likely to fail. More specifically, the chosen parts are linked to the power, along with the drawbar pull, using a 6-component load cell equipped between the tractor and the onion harvester. The water content of the soil ranged between 5.7%-7.5%, and the strength between 250-1171 kPa. The test soil was subsequently classified into loam soil based on the size distribution ratio of the sieved soil. The onion harvester can be considered as structurally safe based on the derived safety factor and the drawbar pull of 115-1194 kgf, according to the working speed based on agricultural fieldwork.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1133-1144
• /
• 2021

Zero-copy is a technology that is also called no-memory copy, and through its use, context switching between the user space and the kernel space can be reduced to minimize the load on the CPU. However, this technology is only used to transmit small random files, and has not yet been widely used for large file transfers. This paper intends to discuss the practical application of zero-copy in processing large files via a network. To this end, we first developed a small test bed and program that can transmit and store data based on zero-copy. Afterwards, we intend to verify the usefulness of the applied technology in detail through detailed performance evaluation

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.547-552
• /
• 2022

In this study, shape-based track management by analyzing track irregularity was studied in terms of force-based track irregularity analysis by numerical analysis of wheel-rail interaction force using by the measured vertical irregularity. The effect of the vertical irregularity of the track due to the difference in track types on the wheel-rail interaction force and the track acceleration in the connecting section of the sleeper floating track and the direct fixation track on concrete bed were analyzed. As the results of this study, the measured vertical irregularity was directly affect the vertical wheel load (the wheel-rail interaction force) and the rail acceleration, and it has been demonstrated to change consistently. In this study, the adequacy and necessity of the force-based track irregularity analysis method was verified based on the wheel-rail interaction analysis using the the measured vertical irregularity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.268-275
• /
• 2023

This paper delves into the crucial realm of support structures in metal additive manufacturing (AM) processes and their direct impact on the stiffness of printed components. With the continuous evolution of AM technologies, optimizing support structures has become imperative to enhance the overall quality and performance of manufactured metal parts. Therefore, in this study, tensile specimens were manufactured using various representative support design variables such as support type, spacing, and penetration depth, and the differences in displacement-load curve were analyzed though tensile test. Using additively manufactured support shaped tensile specimen, the paper presents a comprehensive examination of the effect of support parameters on their stiffness. The findings contribute to advancing the understanding how to design supports to suppress thermal deformation of metal parts during AM process, thereby paving the way for enhanced design freedom and functional performance in the ever-expanding field of AM.

• Journal of the Korean association of regional geographers
• /
• v.13 no.4
• /
• pp.409-421
• /
• 2007

The purpose of this paper is to consider the formation processes and depositional conditions of bars formed at the upper-stream part of Sayeon Dam since Sayeon Dam construction in 1964. Results of analyzing the shape characteristics of bars and their sediment grain size distribution are as follow: Firstly, bars are able to categorized as subaqueous bars (A, B), mid-channel bars(C, D), and tributary side-bars(E). Secondly, the outline of bars has longish along the flow path, and their height lowers more and more going towards downstream. Also the height of bar surface tend to heighten from flow path to mountain slope. However, the near part of A is comparatively higher than its distant part, A is defined as a subaqueous natural levee and back swamp. Thirdly, the average particle size of A and B become smaller toward mountain slope. In transportation style, ratio of suspended load become higher toward mountain slope. Fourthly, sorting is worse to very worse according with lake's random changable water level. Fifthly, bar A and B were formed by vertical sedimentation of sediments according as sediments transported along flow path in the subaqueous conditions were spreaded out of flow path. C and D were formed by bed load as flood level lowered. And E was formed by vertical sedimentation while stream flow stopped in tributary's mouth areas with the water level heightening.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.629-636
• /
• 2017

Urban railway are the most widely used means of transportation in the metropolitan area. It is difficult to draw out problems through the quantitative analysis technique because most of the research results show that most of the guide signs are installed with many or few guide signs. In this study, we propose a method to evaluate the information load and proper installation location at the main decision point in the transfer passageway for Suseo Station by applying Positive Guidance. As a result of analyzing the information load using this technique, it is suggested that the necessary information should be provided centered on the copper node because it provides confusion of the users by providing the same information in the transfer line. It is necessary to obtain guidance on how to remove the sign (advertising, high ceilings, etc). The study will be regarded as a key for the basis and placement of the guidelines for determining the appropriateness of the in the future urban railway station sign guide.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.4 s.36
• /
• pp.485-495
• /
• 1991

This study examined the effects of referral requirements for insurance patients which have been enforced since July 1, 1989 when medical insurance coverage was extended to the whole population except beneficiaries of medical assistance program. The requirements are mainly aimed at discouraging the use of tertiary care hospitals by imposing restrictions on the patient's choice of a medical service facility. The expectation is that such change in the pattern of medical care utilization would produce several desirable effects including increased efficiency in patient care and balanced development of various types of medical service facilities. In this study, these effects were assessed by the change in the number of out-patient visits and bed-days per illness episode and the share of each type of facility in the volume of services and the amount of expenditures after the implementation of the new referral system. The data for analysis were obtained from the claims to the insurance for government and school employees. The sample was drawn from the claims for the patients treated during the first six months of 1989, prior to the enforcement of referral requirements, and those of the patients treated during the first six months of 1990, after the enforcement. The 1989 sample included 299,824 claims (3.6% of total) and the 1990 sample included 332,131 (3.7% of total). The data were processed to make the unit of analysis an illness episode instead of an insurance claim. The facilities and types of care utilized for a given illness episode are defined to make up the pathway of medical care utilization. This pathway was conceived of as a Markov Chain process for further analysis. The conclusion emerged from the analysis is that the enforcement of referral requirements resulted in less use of tertiary care hospitals, and thereby decreased the volume of services and the amount of insurance expenses per illness episode. However, there are a few points that have to be taken into account in relation to the conclusion. The new referral system is likely to increase the use of medical services not covered by insurance, so that its impact on national health expenditures would be different from that on insurance expenditures. The extension of insurance coverage must have inereased patient load for all types of medical service organizations, and this increase may be partly responsible for producing the effects attributed to the new referral system. For example, excessive patient load for tertiary care hospitals may lead to the transfer of their patients to other types of facilities. Another point is that the data for this study correspond to very early phase of the new system. But both patients and medical care providers would adapt themselves to the new system to avoid or overcome its disadvantages for them, so as that its effects could change over time. Therefore, it is still necessary to closely monitor the impact of the referral requirements.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.519-525
• /
• 2008

Biodegradation of toluene, styrene and hydrogen sulfide as model compounds of volatile organic compounds and odor from waste gas was investigated experimentally in a biotrickling filter. This study focussed on the description of experimental results with regard to operating conditions. The effect of varying $H_2S$ load rate and inlet concentration was investigated under autotropic and mixotropic environmental conditions. The $H_2S$ removal efficiencies of greater than 99% were achieved at $H_2S$ loads below $10g/m^3{\cdot}hr$ for each environment. It was observed that the maximum elimination capacity of mixotrophic filter was achieved a little greater than the one of autotrophic filter. The biofiltration of toluene and styrene in trickling bed was examined under different gas flow rates, load rates, and inlet concentrations. Below $40g/m^3{\cdot}hr$ of toluene loading, the elimination capacity and loading were identical and it was completely destroyed. In high loading of toluene, the biotrickling filter was operated at its maximum elimination capacity. In the inlet concentration of 0.2, 0.5, and $1.0g/m^3$, the maximum elimination capacity of toluene showed 40, 45, and $60g/m^3{\cdot}hr$, respectively. After a short adaptation period, it was demonstrated that the results of styrene in originally toluene adapted bioreactor was similar with the ones of toluene. However, the performance of filer for styrene is generally a little lower than for toluene. The operating conditions (including liquid flow rate etc.) allowing the highest removal efficiency should be determined experimentally for each specific case.