• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1307-1311
• /
• 2007

Three-dimensional transient keyhole profile is numerically analyzed for the case of stationary laser keyhole welding. Volume of fluid (VOF) method is adopted to track the free surface of molten metal based on the three governing equations which are continuity, momentum and energy equations. Multiple reflections of laser beam at the keyhole walls are also included in analysis through a real-time ray tracing technique. In this simulation, especially, polarization of laser is considered as an energy absorption mechanism following the Fresnel reflection theory. Both cases of linearly and circularly polarized beam are simulated and compared. The results show that the theoretically generated keyhole is asymmetrically stretched along the direction of polarization which is already observed experimentally before.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.236-242
• /
• 2019

An Nd:YAG slab structure was designed for a high-power zigzag slab laser amplifier based on computational simulation of the wavefront distortion. For the simulation, the temperature distribution in the slab was calculated at first by thermal analysis. Then, the optical path length (OPL) was obtained by a ray tracing method for the corresponding refractive index variation inside the slab. After that, the OPL distribution of the double-pass amplified beam was calculated by summing the results obtained for the first and second passes. The amount of wavefront distortion was finally obtained as the peak-to-valley value of the OPL distribution. As a result of this study, the length and position of the gain medium were optimized by minimizing the transverse wavefront distortion. Under the optimized conditions, the transverse wavefront distortion of the double-pass amplified beam was less than $0.2{\mu}m$ for pump power of 14 kW.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.6
• /
• pp.464-472
• /
• 2005

Purpose: SPECT using a fan-beam collimator improves spatial resolution and sensitivity. For the reconstruction from fan-beam projections, it is necessary to implement direct fan-beam reconstruction methods without transforming the data into the parallel geometry. In this study, various fan-beam reconstruction algorithms were implemented and their performances were compared. Materials and Methods: The projector for fan-beam SPECT was implemented using a ray-tracing method. The direct reconstruction algorithms implemented for fan-beam projection data were FBP (filtered backprojection), EM (expectation maximization), OS-EM (ordered subsets EM) and MAP-EM OSL (maximum a posteriori EM using the one-step late method) with membrane and thin-plate models as priors. For comparison, the fan-beam protection data were also rebinned into the parallel data using various interpolation methods, such as the nearest neighbor, bilinear and bicubic interpolations, and reconstructed using the conventional EM algorithm for parallel data. Noiseless and noisy projection data from the digital Hoffman brain and Shepp/Logan phantoms were reconstructed using the above algorithms. The reconstructed images were compared in terms of a percent error metric. Results: for the fan-beam data with Poisson noise, the MAP-EM OSL algorithm with the thin-plate prior showed the best result in both percent error and stability. Bilinear interpolation was the most effective method for rebinning from the fan-beam to parallel geometry when the accuracy and computation load were considered. Direct fan-beam EM reconstructions were more accurate than the standard EM reconstructions obtained from rebinned parallel data. Conclusion: Direct fan-beam reconstruction algorithms were implemented, which provided significantly improved reconstructions.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2003

Numerous investigations have demonstrated that diffused reflection is one of the most important factors in predicting room acoustics by computer simulation. Recent studies have suggested several computational algorithms in order to account for diffused reflections in the ray tracing or beam tracing method. In this study, a computational algorithm for the calculation of diffuse sound reflections in the image method is suggested and a computer simulation system is developed based on the suggested algorithm. The methodology adopted in our computer simulation system is similar to the extended radiosity method, which is developed for the computer graphics. In a real room, sound energy is reflected in a partially diffused manner which results in four reflection combinations: diffuse-diffuse, specular-specular, diffuse-specular and specular-diffuse. In this study, higher order form factor is introduced to handle the four types of reflection combinations so that the partially diffused reflection could be modeled. In this paper, the concept of extended radiosity method is described and the approximate method of calculating higher order form factor is suggested. Finally, the effect of higher order form factors on the simulation of reverberation time is investigated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.43-48
• /
• 2015

A focal length-correcting lens called the F-theta lens is required to compensate for the different focus on spot size due to the deflected incident laser beam. The F-theta lens was designed by the ray tracing method and fabricated by a 3D printer with polymer-based material. The designed F-theta lens is able to compensate for the focus on spot size by an incidence angle of 0 to 2 degrees. Based on the analysis of the simulation, there was almost no aberration in the $0^{\circ}C$ incidence angle, and the maximum of $50{\mu}m$ of aberration was observed at the incidence angle of $2^{\circ}$. Diffraction-encircled energy was analyzed to characterize the designed optics, and an image simulation was performed to confirm the actual image resolution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.114-124
• /
• 2002

In this paper, we proposed the image-based 3D ray tracing indoor propagation model using a patch scattering model for fading analysis of indoor propagation environments. An image-based 3D ray tracing technique is mainly used, which allows the rapid generation of the complex channel impulse response for any given location and polarization of transmitter and receiver. Due to the site specific nature of indoor environment, we took into account the location and the electrical properties of individual walls and objects such as windows, doors and plaster board in our propagation model. Besides, the 3D radiation beam-patterns and polarizations of arbitrary antennas were considered, and using patch scattering model we can consider the change of the polarization due to the scattering from the various indoor objects, like desks, chairs and etc. the are almost impossible to be modeled with the basic image-based ray tracing method. The model will predict the impulse response, the rms delay spread, the fading characteristics of the channel and performances of the polarization diversity schemes.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.306-311
• /
• 2003

In this paper, we modeled the incident beam in order to analyze and evaluate the optical thin film device for wavelength division multiplexing in optical telecommunication network. As applied ray tracing method to the optical path, we were compared the accuracy of coupling efficiency simulated by two modeling methods. In the results of sinulation, ceil modeling method was preferred to annual modeling method in micro-optic device because of accuracy for coupling efficiency and Gaussian intensity distribution. In the results of optimal simulation for optical device using thin film filter, the distance (d1) between optical fiber and GRIN lens, the distance (d2) between GRIN lens and thin film filter and the coupling efficiency were 0.24 mm, 0.25 mm and -0.11 ㏈ respectively. As d2 was displaced at 0.25 mm and d1 was varied in order to evaluate the optimal value, d1 and maximum coupling efficiency were 0.24 mm and -0.35㏈, respectively. Then the results of experiment were corresponded to that of optimal simulation by cell modeling and it was possible to analyze the performance for optical device using thin film filter by the simulation.

• Laser Solutions
• /
• v.10 no.3
• /
• pp.11-14
• /
• 2007

A trepanning optics is the optical system which makes focus laser beam rotate and incline to the material processing surface. The trepanning optics is used in order to improve the quality of laser drilling process and control the taper of drilling diameter. In order to make trepanning optics, we can use the eccentricity of lens, scanner using two mirror, dove prism, or wedge. Among these method, in this paper wedge is used for trepanning optics. The wedge trepanning optics has advantage on the high speed of rotation. In this paper, we design the wedge trepanning optics using ray tracing. ements and engine design variables of system to satisfy the customer's requirements.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.90-95
• /
• 2001

현재까지 고주파수 진동해석에 가장 많이 쓰이는 방법은 통계적 에너지 해석법 (SEA)이다. 그러나 SEA는 많은 가정을 사용하고 있고 시간 및 공간 평균된 에너지 값을 사용하기 때문에 결과에서 알아낼 수 있는 정보가 제한된다. 이러한 단점을 극복하기 위하여 진동 전도 해석법(VCA)이나 파동 인텐시티기법 (WIA)등이 제안되었고, 기하음향학의 한 방법인 레이 추적 기법 (RTM)도 구조음향학에 적용하고 있다. 본 논문에서는 레이 추적 기법을 이용하여 오일러-베르누이 보 이론에 근거한 고정단-자유단 경계조건을 가지는 단일 곡보의 진동 해석을 수행하였다. 예제를 통한 해석 결과, 주파수가 높을수록, 또 감쇠가 클수록 더 정확한 결과를 예측할 수 있음을 관찰할 수 있었으며, 따라서 기존 해석법들의 가정에 적합하지 않은 구조물에 적용할 수 있는 장점이 있다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.329-337
• /
• 2024

Free-space optical communication technology enables the high-speed data transmission and excellent anti-jamming security. We conduct research on satellite-to-ground free-space optical communication links for high-speed transmission of large-capacity surveillance and reconnaissance data. Since the satellite continues to move along its orbit while the optical signal is transmitted between the satellite and the ground, the pointing angle of the beam from the ground terminal needs to be corrected by Point Ahead Angle(PAA) so that the transmitted light reaches the expected location of the satellite. In this paper, we present the algorithm for PAA estimation and control.