• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.151-159
• /
• 2002

Frequency synthesizer is an essential part for developing high speed frequency hopping radio. A high speed synthesizer using DDS driven PLL technique is designed and implemented for a X-band portable satellite terminal. It generates transmitter and receiver frequency ranging 6600∼7100MHz and 6140∼6640MHz, respectively by using 102.4MHz local oscillator, Its lock time is below 15 $\mu$sec and Its phase noise is below -754dBc at 1KHz offset Sequency.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2017-2019
• /
• 2004

본 논문에서는 S/C-밴드(2${\sim}$8GHz)에서 동작하는 초광대역 주파수 합성기를 설계하였다. 먼저 S-밴드(2-4GHz) 광대역 전압제어발진기를 가지고 획득시간을 단축하기 위한 연산 증폭기를 사용한 DA변환기와 능동루프 필터(Active Loop Filter)로 구성된 S-밴드 주파수 합성기를 설계하였다. 그리고 주파수 체배기, SPDT RF 스위치를 통합하여 최종적으로 S/C-밴드 초광대역 주파수 합성기를 설계하였다. 제작된 주파수 합성기는 200kHz 비교주파수에서 위상잡음은 100kHz 옵셋 주파수에서 -92dBc/Hz이하, 불요주파수 특성은 -62.33dBc 이하, 획득시간은 1.3ms 이하로 측정되었다.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.45-49
• /
• 2011

In this paper, we present the high resolution and low phase noise frequency synthesizer for satellite terminal. To improve the phase noise of frequency synthesizer, we analyze how the configuration of frequency synthesizer affect the phase noise. The implemented frequency synthesizer reduce the phase noise and show the high resolution. The output power of this frequency synthesizer is over -2dBm in 950~1450MHz and the phase noise of the -101dBc/Hz at 10kHz frequency offset.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.99-103
• /
• 2005

In this paper, a new technique to reduce the phase noise in microwave oscillators is proposed using the resonant characteristics of the Photonic Bandgap(PBG). We applied PBG structure to ground of the microstrip line resonator with the low Q(Quality factor). Therefore, we improved about 10 dBc in contrast to phase noise characteristic of the conventional microstrip line oscillator at 2.4 GHz ＠ 100 MHz offset. Output power is 7.09 dBm.

• Journal of Multimedia Information System
• /
• v.5 no.2
• /
• pp.139-142
• /
• 2018

This work presents a novel architecture of phase locked loop (PLL) with the current compensating scheme to improve phase noise characteristic. The proposed PLL has two charge pumps (CP), main-CP (MCP) and sub-CP (SCP). The smaller SCP current with same time duration but opposite direction of UP/DN MCP current is injected to the loop filter (LF). It suppresses the voltage fluctuation of LF. The PLL has a novel voltage controlled oscillator (VCO) consisting of a voltage controlled resistor (VCR) and the three-stage ring oscillator with latch type delay cells. The VCR linearly converts voltage into current, and the latch type delay cell has short active on-time of transistors. As a result, it improves phase noise characteristic. The proposed PLL has been fabricated with $0.35{\mu}m$ 3.3 V CMOS process. Measured phase noise at 1 MHz offset is -103 dBc/Hz resulting in 3 dBc/Hz phase noise improvement compared to the conventional PLL.

• Korean Journal of Animal Reproduction
• /
• v.22 no.2
• /
• pp.153-161
• /
• 1998

This study was conducted to examine the viability of nuclear transfer bovine embryos following embryo transfer. Donor embryos were treated with nocodazole to arrest their cell-cycle-stage at mitotic(M) phase. After releasing from nocodazole blastomeres were separated and transferred into the enucleated oocytes(BC), or cultured in medium with aphidicolin. Freshly cleaved blastomeres within 1.5h after cleavage(AC) and non-cleaved ones up to 3h after releasing from nocodazole(NC) were transferred into the enucleated oocytes. Blastocysts derived from nuclear transfer were transferred to Day 7~8 recipient cows. Some blastocysts were vitrified and thawed before embryo transfer. Developmental rates to the blastocyst stage were higher in AC(18.1%, P<0.05) than BC(8.6%) and NC(5.1%). Blastocyst development slightly enhanced with aphidicolin(1~2$\mu\textrm{g}$/ml) treatment(16.9~22.6%) compared to non treated control(11.1%). Survival rate fo vitrified nuclear transfer embryos after thawing was 75%(24/32). Twnety-three vitrified nuclear transfer embryos and 3 fresh ones were transferred to 23 recipients, 6 heads were pregnant and 1 male calf(24 kg) was born from a recipient cow recevied one vitrifiedthawed nuclear transfer embryo at 277 days after embryo transfer. This result suggests that the nuclear transfer embryos can developed to term after vitrification andembryo transfer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1009-1014
• /
• 2012

This paper has proposed a 2,500 MHz ~ 2,570 MHz 0.13-${\mu}m$ CMOS RF front-end transmitter for LTE-Advanced systems. The proposed RF front-end transmitter is composed of a quadrature up-conversion mixer and a driver amplifier. The measurement results show the maximum output power level is +6 dBm and the suppression ratio for the image sideband and LO leakage are better than -40 dBc respectively. The fabricated chip consumes 36 mA from a 1.2 V supply voltage.

• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.42.1-42.9
• /
• 2020

Objective: This study aimed to examine the physical properties (pH and flow) of 2 novel bioceramic sealers. Materials and Methods: The tested sealers were a calcium hydroxide sealer (Sealapex) and 2 bioceramic sealers (BioRoot RCS and TotalFill BC Sealer). Flow measurements were conducted according to ISO 6876/2012, with a press method of 0.05 mL of sealer. The pH of fresh samples was tested immediately after manipulation, while set samples were stored for 3 times the recommended setting time. The predetermined time intervals ranged from 3 minutes to 24 hours for fresh samples and from 10 minutes to 7 days and 4 weeks for the set samples. Analysis of variance was performed, with p = 0.05 considered indicating significance. Results: The mean flow values were 26.99 mm for BioRoot, 28.19 for Sealapex, and 30.8 mm for TotalFill BC Sealer, satisfying the ISO standard. In the set samples, BioRoot RCS had higher pH values at 24 hours to 1 week after immersion in distilled water. At 2 weeks, both bioceramic sealers had similar pH values, greater than that of Sealapex. In the fresh samples, the bioceramic sealers had significantly higher initial pH values than Sealapex (p < 0.05). At 24 hours post-immersion, all sealers showed an alkaline pH, with the highest pH observed for TotalFill. Conclusions: The TotalFill BC Sealer demonstrated the highest flow. The bioceramic sealers initially presented higher alkaline activity than the polymeric calcium hydroxide sealer. However, at 3 and 4 weeks post-immersion, all sealers had similar pH values.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.589-593
• /
• 2003

Silica based Planar Lightwave Circuits (PLC) have been applied to various kinds of wave-guided optical passive devices. SiO$_2$ (buffer) and GeO$_2$-SiO$_2$ (core) thick films have been deposited by Flame Hydrolysis Deposition (FHD). The SiO$_2$ films were produced by the flame hydrolysis reaction of halide materials such as SiCl$_4$, POCl$_3$ and BCl$_3$ into an oxy-hydrogen torch. The P concentration increased from 2.0 to 2.8 at％ on increasing the POCl$_3$/BCl$_3$ flow ratio. The refractive index increased from 1.4584 to 1.4605 on increasing the POC1$_3$/BC1$_3$ flow ratio from 0.6 to 2.6. The refractive index of GeO$_2$-SiO$_2$ films was controlled by the GeCl$_4$ flow rate. The refractive index increased from 1.4615 to 1.4809 on increasing the GeCl$_4$ flow rate from 30 to 120 sccm.

• 월간낙농육우
• /
• v.21 no.1 s.225
• /
• pp.130-134
• /
• 2001

건유우관리와 관련된 사항을 요약해 보면 다음과 같다. 1. 수정일과 분만일을 정확히 기록한다. 2. 착유후기에 적절한 사료급여로 건유직전에 BCS를 3.5 수준에 맞춘다. 3. 건유기간은 소에 EK라 45$\~$60일 사이로 정한다. 4. 충분한 조사료와 분만시 적절한 신체상태유지를 위해 약간의 농후사료를 공급한다. 5. 광물질과 비타민을 충분히 공급한다. 6. 분만 3주전부터는 3$\~$6kg의 농후사료를 급여하