• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.423-431
• /
• 2022

The UPS(Uninterruptible Power Supply) system operates in the battery charging mode when the grid is normal, and in the UPS mode, which is the battery discharge mode when a grid error occurs. Since the UPS must supply the same voltage as the grid to the load within 4 [ms] in case of a grid error, the switching time and power recovery time should be short when controlling the output voltage and current of the UPS, and the power failure detection time is also important. The power outage detection algorithm using DFT(Discrete Fourier Transform) proposed in this paper compares the grid voltage waveform with the voltage waveform including the 9th harmonic generated through DFT using Schmitt trigger to detect power outage faster than the existing power outage monitoring algorithm. There are advantages. Therefore, it is possible to supply instant and stable power when switching modes in the UPS system. The multi-power-applied UPS system proposed in this paper uses DFT, which is faster than the conventional blackout monitoring algorithm in detecting power failure, to provide stable power to the load in a shorter time than the existing power outage monitoring algorithm when a system error occurs. The detection method was applied. The changeover time of mode switching was set to less than 4 [ms], which is 1/4 of the system cycle, in accordance with KSC 4310 regulation, which was established by the Industrial Standards Council on the regulation of uninterruptible power supply. A 10 [kW] UPS system in which commercial voltage, vehicle generator, and auxiliary diesel generator can be connected to each of the proposed transfer devices was constructed and the feasibility was verified by conducting an experiment.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1071-1081
• /
• 2022

As the demand for high-rise buildings increases, the demand for high-speed elevators is also increasing. In order to make a high-speed elevator, a method is needed to reduce the weight of the elevator's components, which is a constraint on the increase in speed. As a measure to reduce the weight, it is possible to remove the traveling cable for power and signal supply. Since the weight of the traveling cable varies depending on the position of the carriage, it is difficult to compensate the weight using the counter weight. The power supply is a structure in which a brush-rail type power input terminal is installed in the elevator hoistway to receive power in a contact-type manner while the carriage is moving. If a small-capacity ESS is installed in a passenger car, power can be supplied uninterruptedly inside the passenger car. A small-capacity ESS charging system to be applied to such an elevator system is required to perform several functions. First, the passenger Car must be able to charge as much as possible even during high-speed operation. A control algorithm with high responsiveness is required because charging starts and ends repeatedly by the partially installed input power stage. In addition, if the input-side line impedance is large due to the structure of the system and the response characteristic is increased, the stability of the system may be lowered. Accordingly, in this paper, we propose a control algorithm that has a stable steady-state output while having a fast response in a transient state. To verify the proposed control algorithm, simulation was conducted using PSIM, and the performance of the controller was verified by manufacturing a prototype buck conveter charger.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.5
• /
• pp.31-35
• /
• 2011

In this paper, the miniaturized FM transmitter with dual-frequency is developed, and tested in the field. In this system two frequencies 88.1 MHz and 88.3 MHz is used. The transmitter is designed with 2.6 cm^3 system size, horizontal, vertical, height respectively. The operating voltage is 3.7 V and used the built-in storage battery in order to minimize. The system can use continuously during 7 hour with once charging. The channel separation ability is 40 dB. Consequently, this system is used conveniently with short distance information transmitter system at the industry field.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.345-354
• /
• 2005

Mobile grid can provide the grid service to grid users regardless of space and time. There are many restrictions to use grid service in mobile environment such as battery power of mobile device, movement pattern of mobile device etc. So it is difficult to apply the grid technologies of wired network to wireless network environments. Therefore, to provide the mobile grid service, we suggested the mobile grid architecture using ad-hoc network. Also we showed that hybrid routing protocol is efficient for mobile grid service by considering the battery power of mobile device and simulations of evaluating the delay time of three routing protocols using NS-2. We will study the methods of resource allocations and network reliability to provide the mobile grid service.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.676-685
• /
• 2020

This study developed smart vests with heat and massage functions that changed patterns, designs, materials, etc., and evaluated their functions and satisfaction. A knitted fabric with good elasticity and a heating lining were used, and in consideration of this, the final vest pattern fitted to the upper body was completed. A heat pad was attached to the back, and 6 vibration motors were attached to the trapezius muscle. The controller was placed on the left chest for easy operation, and the battery was stored in an inner pocket under the controller. The heating effect of the smart vest, the location of the devices, and the ease of operation were excellent. When the massage function was operated, the thermal comfort was increased compared to when the massage function was not operated, and the high thermal comfort was perceived by the operation of heat and heat+massage function. Due to the battery, the weight, irritating contact of devices and wearing sensation decreased, but there was no reduction in wearing sensation due to heat and vibration devices. The greater the satisfaction with the massage function, thermal comfort, fit, appearance and weight, the greater the product satisfaction.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.60-67
• /
• 2018

Recently, environment-friendly cultivation technology is popular. A cultivator is useful for turning over the stall bedding in a poultry farm. In this study, a rotary-based cultivator with a rechargeable battery was developed for eco-friendly management of broiler chickens. From the results of the test run, the clustered stall bedding was approximately divided into up and down layers. Through experimental evaluation, the working width was more than 60 cm, and the noise was less than 80 dB. The output of the motor was 400 W, and the speed of rotation was 3000 rpm. Electric battery type cultivators are expected to be widely used in the livestock industry.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.357-362
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. In this thesis, dynamic characteristics of the steel can labeling machine on the automatic cell assembly line are studied. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed for each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Therefore, Virtual Engineering of the steel can labeling machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.727-730
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed far each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Virtual Engineering of the separator inserting machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.79-104
• /
• 2018

A detailed literature review is presented for the applications of the heat pump technologies on the electric vehicles Heating, Ventilation and Air Conditioning (HVAC) system. Due to legal regulations, automotive manufacturers have to produce more efficient and low carbon emission vehicles. Electric vehicles can be provided these requirements but the battery technologies and energy managements systems are still developing considering battery life and vehicle range. On the other hand, energy consumption for HVAC units has an important role on the energy management of these vehicles. Moreover, the energy requirement of HVAC processes for different environmental conditions are significantly affect the total energy consumption of these vehicles. For the heating process, the coolant of internal combustion (IC) engine can be utilized but in electric vehicles, we have not got any adequate waste heat source for this process. The heat pump technology is one of the alternative choices for the industry due to having high coefficient of performance (COP), but these systems have some disadvantages which can be improved with the other technologies. In this study, a literature review is performed considering alternative refrigerants, performance characteristics of different heat pump systems for electric vehicles and thermal management systems of electric vehicles.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1886-1891
• /
• 1998

Traction battery chargers are an integral part of the required charging infrastructure. EV charging systems are continuing to improve in design. The newer types are affecting power quality to a much lesser extent. High efficiency battery chargers are being designed and produced which form little or no harmonic distortion. In addition chargers are becoming smaller and lighter. This is due mainly to the fact that there are improvements in the power electronics industry, especially with respected to IGBTs. Lower costs are achieved by the reduction in price of the IGBTs, standard magnetic material and small cores for inductors and transformers. But electric vehicles occupy a relatively small market niche at present. Therefore with already existing power supply networks, establishment of EV infrastructure can safeguard the service value of present vehicle as well as ensure the ability to charge a significant number of such vehicle. In this paper, we surveyed the update charging technologies according to the conductive charging, inductive charging and fast charging. Then we suggested cost-optimized charging infrastructure in consideration of the economical, political and technical standpoint.