• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.529-533
• /
• 2012

By introducing RPS(Renewable Portfolio Standard) for reduction of greenhouse gas, Renewable energy sources have becoming widespread gradually. However, Renewable energy sources, such as wind power and PV are difficult to control the output and they have intermittent characteristics of the output. These characteristics would cause some problems when it is connected in the power system. In order to solve these problems, Energy Storage Systems(ESS) are considered to use. Although there are many different storage devices, the utilization of Secondary Battery is the one of the best ways to stabilize an output fluctuation of RES because of its fast responsibility. For that reason, it would better fit a large-capacity of Secondary battery for stabilization. However, batteries cannot be installed with a large capacity blindly because of its expensive cost. So to select proper capacity of the battery is an important consideration. This paper presented a methodology for the optimal capacity and operation of ESS in microgrids.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.13-19
• /
• 2008

In order to reduce the level of recoil force, new recoil technology must be employed. The present study discusses a soft-recoil system that can reduce dramatically the recoil force. The firing sequence of the soft recoil system is radically different from that of a conventional system. The gun is latched and preloaded in its out-of-battery position prior to firing. When unlatched, the gun is accelerated and forward momentum is imparted to the recoiling parts. This momentum is opposed by the ballistic force imparted by firing and the recoil force and stoke will be reduced. In the present study, the soft-recoil system with hydraulic dampers is simulated and its characteristics are investigated theoretically. The results of the simulation show that the soft-recoil system could dramatically reduce the recoil force and the recoil stroke compared to the conventional recoil systems. However, the soft-recoil system was not able to perform well when the firing fault modes like prefire, hang-fire, and misfire happen. Hence, we need to employ a control algorithm to prevent the damage of the recoil system due to these fault mode.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.94-102
• /
• 2018

Purpose: In this study, a maintenance free super-capacitor battery charging system based on the photovoltaic module, to be used in agricultural electric carriers, was developed and its charging characteristics were studied in detail. Methods: At first, the electric carrier system configuration is introduced and the electric control components are presented. The super-capacitor batteries and photovoltaic module used in the experiment are specified. Next, the developed charging system consisting of a constant current / constant voltage Buck converter as the charging device and a super-capacitor cell as a balancing device are initiated. The proposed circuit design, a developed PCB layout of each device and a proportional control to check the current and voltage during the charging process are outlined. An experiment was carried out using a developed prototype to clarify the effectiveness of the proposed system. A power analyzer was used to measure the current and voltage during charging to evaluate the efficiency of the energy storage device. Finally, the conclusions of this research are presented. Results: The experimental results show that the proposed system successfully controls the charging current and balances the battery voltage. The maximum voltage of the super-capacitor battery obtained by using the proposed battery charger is 16.2 V, and the maximum charging current is 20 A. It was found that the charging time was less than an hour through the duty ratio of 95% or more. Conclusions: The developed battery charging system was successfully implemented on the agricultural electric carriers.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.74-78
• /
• 2002

Zinc Air battery obtain their energy density advantage over the other batteries by utilizing ambient oxygen as the cathode materials, and reusing cathode as recycled form. And specific capacity of zinc powder is as high as 820 mAh/g. However, if the pore size in cathode is small then the flow rate of air decreased, and as a result of that discharge voltage of batteries becomes low. We focused on resistance and porosity of cathode. So we studied the effects of conducting agents to zinc air batteries performance, capacity, power density, average discharge voltage, resistance. And we also measured porosity of cathode by the ASTM. So we have got optimum contents of conducting agent.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.123-127
• /
• 2010

An assembled-graphite/DSA(Dimensionally Stable Anode) was prepared using graphite powder to increase durability and energy efficiency of redox flow battery and investigated its electrochemical properties in vanadium-based electrolyte. The cyclic voltammetry (CV) was carried out in the voltage range of -0.7V and 1.6V vs. SCE at 5 mV/sec scan rate to analyze vanadium redox reaction. From the CV results, the assembled-graphite/DSA electrode showed a fast couple reaction and good reversibility in 2M $VOSO_4$ + 2.5 M $H_2SO_4$ electrolyte. Therefore, it has been expected that this electrode increases power density as well as energy density of redox flow battery.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.735-737
• /
• 2017

An Off grid or remote solar electric systems are an energy supply to our home or to our companies without the utility of Grid at all. Off grid solar systems are very important for those who live in remote locations especially for developing countries where getting the electric grid is extremely expensive, inconvenient or for those who doesn't need to pay a monthly bill with the electric bill in general. The main critical components of any solar power system or renewable energy harvesting systems are the energy storage systems and its charge controller system. Energy storage systems are the essential integral part of a solar energy harvesting system and in general for all renewable energy harvesting systems. To provide an optimal solution of both high power density and high energy density at the same time we have to use hybrid energy storage systems (HESS), that combine two or more energy storage technologies with complementary characteristics. In this present work, design and simulation we use two storage systems supercapacitor for high power density and lithium based battery for high energy density. Here the system incorporates fast-response supercapacitors to provide power to manage solar smoothing and uses a battery for load shifting. On this paper discuss that the total energy throughout of the battery is much reduced and the typical thermal stresses caused by high discharge rate responses are mitigated by integrating supercapacitors with the battery storage system. In addition of the above discussion the off grid solar electric energy harvesting presented in this research paper includes battery and supercapacitor management system, MPPT (maximum power point tracking) system and back/boost convertors. On this present work the entire model of off grid electric energy harvesting system and all other functional blocks of that system is implemented in MATLAB Simulink.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.175-179
• /
• 2021

With the recent increase in the proportion of single-person households, the demand for reasonable personal mobility has increased, and the "Personal Mobility" industry that can be used conveniently and concisely has grown rapidly. In fact, according to data from the Korea Transport Institute, the scale of the electric kickboards rental industry, one of the personal mobility industry sectors, is expected to expand to 200,000 units in 2022. Due to the characteristics of electric kickboards that are powered by electricity, stable and efficient battery supply is the most basic and important issue. According to recent reviews from users who have used the electric kickboard, there were cases where the use of the electric kickboard is attempted, but the battery is in a discharged state or the battery charge level is low and thus cannot be used. Therefore, this paper proposes a solar charging system for stable battery use of electric kickboards. When this system is applied, it is expected that it will not only be an eco-friendly charging method for electric kickboards, but also stably supply and demand batteries while driving.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.13-23
• /
• 2022

Demand and interest in electric vehicles are increasing rapidly due to environmental issues. Improving the performance of electric vehicles requires the development of automotive batteries and battery joining technologies. Aluminum alloys are the most widely used metals in the electric vehicle industry, and aluminum bonding is used in all processes comprising automotive batteries. Therefore, in this paper, based on the characteristics of aluminum and aluminum alloys and knowledge of various aluminum joining technologies, the main and the next generation bonding technologies used in automotive battery are reviewed. It also explains the structure of automotive secondary battery cells and the integration order of 'cell-module-pack' where joining is used in the process, also various environmental conditions that must be considered when joining.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.263-269
• /
• 2012

In order to present that the electromagnetic compatibility standards following the frequency goes up which is based automotive electronics, in this paper, a hybrid/electric vehicle battery which reflects the frequency of the equivalent circuit model is introduced. By using this circuit modeling, the impedance characteristics can be analysed and an analyze of battery one cell is finished. Using this model, each different from the discharging situation, the discharge characteristic curve could be led. Basic theoretical approaches and measuring results through MATLAB and experimental validation of the EIS measurement equipment was used.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.192-200
• /
• 1999

위성의 전지는 위성의 수명과 직접적인 영향을 갖고 있으며 이것의 정상동작여부에 따라 위성의 안정적인 임무수행여부가 결정된다. 상대적으로 일반화된 셀 모델링의 최근 개발은 NiH2셀의 동특성을 시뮬레이션 하기 위한 기본적인 원리에 기반을 둔 접근방식이다. 그러나 이러한 일반적인 방정식을 통해 비선형성과 전력상태를 포함하는 전지 특성을 예측하는 것은 사실상 불가능하다. 본 연구에서는 다층신경회로망을 이용하여 비선형 특성를 갖는 니켈-하이드로진 전지 특성을 모델링 하였으며, 모델링된 상수값은 위성의 식시간 동안의 전지 전력상태 분석을 위해 사용되었다. 모델링 결과의 정확성을 확인하기 위해 니켈-하이드로진 전지시험결과 분석자료와 비교 검토 되었다. 전지 동작모드는 정상동작모드와 실패모드로 나누어 분석되었다. 정상동작모드는 위성의 식시간 동안 아크젯 동작 여부에 의해 각각 분석되었으며, 또한 태양전지와 배터리 셀 일부의 고장으로 인한 실패모드에서의 전지전력상태가 분석되었다.