The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

High-Frequency Analysis Modeling of Hybrid Vehicle Battery

하이브리드 자동차 배터리의 고주파 해석 모델링

  • 이재중 (성균관대학교 정보통신공학부) ;
  • 이준상 (성균관대학교 정보통신공학부) ;
  • 김미로 ((주) 현대모비스 기술연구소) ;
  • 권혁수 ((주) 현대모비스 기술연구소) ;
  • 나완수 (성균관대학교 정보통신공학부)
  • Received : 2011.09.23
  • Accepted : 2011.12.19
  • Published : 2012.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

In order to present that the electromagnetic compatibility standards following the frequency goes up which is based automotive electronics, in this paper, a hybrid/electric vehicle battery which reflects the frequency of the equivalent circuit model is introduced. By using this circuit modeling, the impedance characteristics can be analysed and an analyze of battery one cell is finished. Using this model, each different from the discharging situation, the discharge characteristic curve could be led. Basic theoretical approaches and measuring results through MATLAB and experimental validation of the EIS measurement equipment was used.

Keywords

References

  1. 이준상, 김종민, 남기훈, 배현주, 성진태, 나완수, "하이브리드/전기 자동차용 고전압 커넥터의 전자기 해석", 전기학회논문지, 60, 131-137, 2011
  2. Xiao Hu, Shaohua Lin, Scott Stanton, "A Novel Thermal Model for HEV/EV Battery Modeling Based on CFD Calculation", ECCE, 2010 IEEE, 893-900, Sept. 2010
  3. H. Haeberlin, "New DC-LISN for EMC - Measurements on the DC side of PV Systems: Realisation and first Measurements at Inverters", 17th European Photovoltaic Solar Energy Conference, Munich, Germany, Oct, 2011
  4. Gregory L. Plett, "Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs Part 2. Modeling and identification", Journal of Power Sources, Vol. 134-2, 262-276, Aug. 2004. https://doi.org/10.1016/j.jpowsour.2004.02.032
  5. Olivier Tremblay, Louis-A. Dessaint, Abdel-Illah Dekkiche, "A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles," Vehicle Power and Propulsion Conference, VPPC. 2007. IEEE, Vol.9-12 pp. 284- 289, Sept. 2007
  6. Marc Doyle, Thomas F. Fuller, John Newman, "Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell," Electrochem. Soc., Vol. 140, 1526-1533, 1993. https://doi.org/10.1149/1.2221597
  7. Steven C. Chapra and Raymond P. Canale, "Numerical Methods for Engineers," 5th Edition, McGraw-Hill, 338-424, 2007
  8. Masaru Yao, Kazuki Okuno, Tsutomu Iwaki, Masahiro Kato, Shigeo Tanase, Katsuji Emra, Tetsuo Sakai, "LiFePO4-based electrode using micro-porous current collector for high power lithium ion battery", Journal of Power Sources, Vol. 173, 545-549, 2007 https://doi.org/10.1016/j.jpowsour.2007.08.014
  9. Ravishankar Rao, Daler N. Rakhmatov, "Battery Modeling for Energy - Aware System Design," IEEE Computer Society, Vol. 36, 77-87, 20 https://doi.org/10.1109/MC.2003.1250886

Cited by

  1. Analysis of Motor Driving Circuit in EV/HEV with Battery Circuit Model Employed vol.3, pp.1, 2013, https://doi.org/10.5370/JICEE.2013.3.1.092
  2. Total Simulation for the Noise Prediction of Motor Driving System in EV/HEV System vol.24, pp.7, 2013, https://doi.org/10.5515/KJKIEES.2013.24.7.710