• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 1990.09a
• /
• pp.34-44
• /
• 1990

This study aimed to provide a basic data for presenting an appropriate plan of bathroom space which is suitable to our bathing behavior. We analized 1052 of small-sized apartment housing floor plans and the results were as follows. 1. Bathroom space were classified into 5 types : bath unit type, separated type, deficisncy type, over bath unit type, and semiseparated type and there was no separated type in this study. 2. The bathroom space type according to the size of housing 1) Deficiency type was the most popular one in 10-15 pyung sized housing. 2) In the size of 16-20 pyung housing, deficiency and bath unit type were popular ones. 3) Bath unit type was the most generalized one in 21-30 pyung. 4) Bath unit type and over unit type were generally equipped in 31-34 pyung housing. 3. The size of bathroom was ranged from 0.7 pyung to 2.0 pyung, and the ratio of it was 7.5- 12%.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.797-805
• /
• 2011

This study was carried out to investigate dyeing characteristics of CDP(cation dyeable polyester)/silk knitted fabrics with disperse type cation dyes/acid dyes by one bath dyeing method in comparison with two bath dyeing method in the interests for rationalization of the dyeing process. The apparent color depth(K/S) of the disperse type cation dyes with CDP and that of acid dyes with silk decreased slowly with increasing pH values of dyebath with the exception of sharp decrease at alkali region for CDP. The contamination behavior of CDP by the acid dyes and that of silk by the disperse type cation dyes decreased with progressing of dyeing. The migration ratio(%) of the disperse type cation dyes with CDP is low compared with that of acid dyes with silk. The sediment in mixed dying solution of disperse type cation dyes and acid dyes remarkably less compared with that of regular type cation dyes and acid dyes at $100^{\circ}C$ regardless applying of preventer agent of precipitation. When CDP/silk knitted fabrics was dyed with by with mixtures of disperse type cation dyes/acid dyes one bath or two bath dyeing method, the characteristic of reflectance spectra of CDP components were greatly influenced by disperse type cation dyes and that of silk components by acid dyes. It was confirmed that K/S values of each components of CDP/silk knitted fabrics dyed by one bath dyeing method decreased slightly compared with two bath dyeing method.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2004

Because acid dyes and reactive dyes require acidic condition for adsorption and alkaline condition for fixation respectively, it is difficult to dye nylon/cotton blends in one-bath one-step dyeing method. In this paper we tried to find out the suitable dye and dyeing condition for one-bath one-step dyeing of nylon/cotton blends. MNT type reactive dyes showed higher exhaustion on cotton as compared with MCT type dyes at neutral pH, which means that the MNT type reactive dyes are preferable for one-bath one-step dyeing method. The optimum condition for one-bath one-step dyeing of nylon/cotton blends was found to be pH 7. Wash fastness of fabrics dyed with half-milling type acid dyes was superior to that of fabrics dyed with levelling type acid dyes, when MNT type reactive dyes were used together.

• The Journal of Pediatrics of Korean Medicine
• /
• v.25 no.2
• /
• pp.102-110
• /
• 2011

Objectives: The purpose of this study is to analyze the baby bath preparation and provide necessary information on the upcoming herbal bath preparation for atopic dermatitis. Methods: We selected 113 baby bath preparation by searching typing in "baby bath preparation" in 6 major web-search-engines, and 17 web shopping malls in Korea. 11 items were evaluated under three criteria : type of product, function and ingredient of goods. Results: Result showed that the most common type of bath preparation were liquid type. 96% of the products contained medical agents. Ingredients of the medical agents were herbal medicine, aroma oil, spring and sea ingredients, vitamin and extract. 33% of the products were bath preparation for the atopic dermatitis and 74% of the products were only for the baby. Conclusions: It is necessary to make a government level guideline for natural materials used in bath preparation, and to develop new products contained herbal medicine abide by oriental medical theory.

• Journal of Korean Academy of Nursing
• /
• v.32 no.4
• /
• pp.519-528
• /
• 2002

The purpose of this study was to test the relationship between health status and bathing. Method: The population of this study consisted of females, above age 20 in urban areas in order to control the effects of extraneous variables, resident areas, gender, and age. Four hundred and twenty-eight (428) women were interviewed with a structured questionnaire. Medical Outcomes Study Short Form (SF)-36 Health Survey assessed individual health status. Bathingbehavior and attitudes toward bath have been measured with questionnaires designed by the authors. Result: The most popular bathing type was shower (46.8%). The preferred type of bath was related to health status. A common purpose of the tub-bath was relieving fatigue and hygiene, but the other purposes were different on the subjects health status. Persons with low health status took frequently tub-baths for health. Attitudes toward bath were related to health status. Women with low scores in physical health recognized more physical effects of bath than psychological effects or hygenic effects. Conclusion: Bathing included physical and psychological dimensions and was related to health status.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.47-50
• /
• 2010

This work discusses a two-step electroless plating method for preparing a Pt thin film on p-type InGaAs substrate, which is defined as Pt I and Pt II. A thin Pt catalytic layer formed in Pt I bath on the substrate at $65^{\circ}C$. In the following Pt II bath, thick Pt films then easily grew on the sensitized layer on InGaAs previously formed in the Pt I bath. The growth of Pt film is strongly influenced by the plating temperature and pH value. To study the plating time effect, the plating of Pt II bath is 5 to 40 min at $80^{\circ}C$ after using Pt I bath at 50~$65^{\circ}C$ for 5min of pH 8~13. Pt film for ohmic contact to p-type InGaAs was successfully prepared by using the two-step Pt electroless plating.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.322-328
• /
• 2009

Emulsion polymerization of octamethylcyclotetrasiloxane (OMCTS) was conducted under ultrasonic irradiation. Two sources of ultrasound with different intensities and frequencies of 20 KHz and 40 KHz were used for horn and bath type reactor, respectively. A combined process of horn and bath was also investigated. The effectiveness of the reaction systems was investigated by measuring conversion as well as intrinsic viscosity of the products. The influence of reaction temperature and sonication time on the progress of sonochemical polymerization was examined. It was found that conversion of greater than 80% and high viscosity were achieved within a few minutes of sonication in a horn type reactor, however, conversion and viscosity showed maximum values depending upon the sonication time. In a bath type reactor where a relatively weak intensity was maintained, longer duration time of more than one hour of sonication was required to reach a high level of conversion and viscosity. Compared with the horn type system, the conversion and viscosity in the bath type reactor were increased along with the sonication time. When the polymerization was carried out in a combined system of horn and bath, the evolution of conversion and molecular weight was quite different from the other cases. For the given geometry of reaction system, acoustic analysis using a commercial software was carried out and the results were correlated with experimental observation.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.5
• /
• pp.40-47
• /
• 2017

The effects of ultrasound in heterogeneous system were investigated in three kinds of ultrasonic systems including a bath-type system (System #1), a double-bath-type system (System #2), and a double-bath-type system partly filled with glass beads (System #3). The ultrasound energy and its attenuation were quantified using calorimetry and the sound pressure measurement method. The sonochemical effects mainly involved in radical oxidation reactions were quantified using KI dosimetry. It was found that ultrasound energy was significantly attenuated in System #2 and #3 due to the presence of solid materials such as a submerged stainless steel reactor and glass beads. However, in spite of low ultrasound energy status, sonochemical oxidation reactions occurred more violently due to the presence of glass beads in System #3. In addition, calorimetry was more adequate to estimate the total energy status of ultrasound in sonoreactors compared to the sound pressure measurement method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.21-24
• /
• 2000

Properties of thermoelectric power in PbS thin films by chemical bath deposition were investigated The qualified PbS thin film was gained with the amounts of Thiourea($4-8ml/{\ell}$ ), Triethanolamine (1-2ml) and NaOH(l0ml). The molecular ratio of Pb and S was 3 : 7. Satisfied crystallization rate and deposition rate of PbS were greater at $50^{\circ}C$ than at $30^{\circ}C$. The constant of thermoelectric power in PbS was nearly $ 500uv/^{\circ}k$. The PbS thin film was changed from p-type to n-type semiconductor at around $200^{\circ}C$. In case of heat treatment at $300^{\circ}C$, the sample kept the characteristic of p-type semiconductors up to $250^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.13-16
• /
• 2000

(PbS)$_{1-x}$ -(CuS)$_{x}$ thin films(x=0, 0.5, 1) were grown on glass substrates by using a chemical bath deposition method. The molecular ratio of Pb to Cu for the PbS-CuS thin films(x=0.5) was measured about 7:3 by using EDX and XRF. The resistivity of non-annealed (PbS)$_{1-x}$ -(CuS)$_{x}$ thin films was about 10 $\Omega$ . cm. However, after annealing, the resistivity of PbS showed a little change, while PbS-CuS and CuS significantly decreased in the range of 0.002 to 0.005$\Omega$.cm. PbS was p-type and CuS was n-type.-type.