• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.143-150
• /
• 1999

A natural dyeing makes fabrics look unique and elegant which cannot be obtain by synthetic dyestuffs. The natural dyestuffs are harmless to human, and it is easy to get them. Also, the natural dyestuffs are environmentally frendly, which is the anther merit for natural dyeing,We investigated dyeability with several fabrics (cotton, wool, ramie, silk and nylon) using an elm bark. We mordants(natural and synthetic). Also, colorfastness in dyed fabrics was estimated by laundering and light. The optimum condition of dyeability in elm bark was 60 min as time, $80^{\circ}C$ as temperature and 1: 40 as bath ratio. The dyeability in silk and nylon was the best among the sample. The treatment of mordants improved the dyeability and colorfastness in silk, wool and nylon. We obtain various color by the mordants.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.245-255
• /
• 2018

In this study, cotton fabrics were coated with $TiO_2$ nanoparticles using 3-mercaptopropyltrimethoxysilane(3-MPTMS), which is highly reactive to cotton fabrics, as a medium, and the characteristics, antimicrobial properties, and photodegradation properties of the fibers were measured. The manufacturing process is as follows. (1) 3-MPTMS was added to isopropanol, and $TiO_2$ colloid was added to the mixture to prepare a solution. (2) Cellulose fibers were immersed in the prepared $3-MPTMS/TiO_2$ solution, stirred for 90 minutes at $45^{\circ}C$ in a constant temperature water bath, and dried thereafter. In order to identify the morphology of the cellulose fibers coated with $TiO_2$ nanoparticles, the surface was observed with a scanning electron microscope(SEM), and SEM-EDS was measured to identify the adhesion of $TiO_2$ nanoparticles. The SEM images showed $TiO_2$ nanoparticle and 3-MPTMS coated layers on the fibers and it was identified that $TiO_2$ nanoparticles were attached to the cellulose fibers. The antimicrobial activity of $3-MPTMS/TiO_2$-treated cotton fabrics was measured using a bacterial reduction method. $3-MPTMS/TiO_2$ cellulose fibers which was irradiated by ultra violet light, showed antimicrobial activity against Escherichia coli(ATCC 43895) and Staphylococcus aureus(ATCCBAA-1707) unlike unirradiated fibers. The cellulose fibers were stained with methylene blue and the photodegradation performance of the stained fabrics was analyzed. The stained fabrics showed high degradation performance with photolytic reactions of $TiO_2$ nanoparticles.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.539-548
• /
• 2019

This study investigated the influence of ultrasound treatment on the quality properties of chicken breast meat and the broth from Korean chicken soup (Baeksuk). In this study, the internal temperature, malondialdehyde content, textural profile, color, dry matter, protein content, phenolic content and sensory properties of chicken breast meat broth from chicken soup with ultrasound treatment were analyzed. The chicken, plants, salt, and water were vacuum packaged in a retort pouch. The chicken soup was manufactured with ultrasound treatment (45 kHz and $1.6W\;cm^{-2}$) in a water bath at $85^{\circ}C$. The texture properties, color, and lipid oxidation of the chicken breast meat from the chicken soup were not affected by the ultrasound treatment. There was no significant difference in the lipid oxidation in the broth of the chicken soup between the control and ultrasound treatment. The dry matter and crude protein contents of the broth were significantly increased by the ultrasound treatment. The broth flavor of the chicken soup manufactured with the ultrasound treatment received a higher score than that of the control in the sensory analysis. There were no differences in the sensory properties of the chicken breast meat from the chicken soup between the control and ultrasound treatment Therefore, the broth quality of the chicken soup can be improved by heating with ultrasound treatment. Additionally, to apply ultrasound technology to the production chicken breast meat and the broth from chicken soup, it is necessary to further study the quality characteristics of the breast meat and broth according to various frequencies and strengths.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.1-13
• /
• 2019

In this study, eco-friendly functional leather was developed by recycling wastes such as eel skin, marigold(Tagetas erecta l.), hinoki cypress(Chamaecyparis obtusa). The hot water extracts of marigold and hinoki cypress leaves were freeze-dried at $-80^{\circ}C$ to prepare colorant powder. The dyeing of eel leather with marigold was carried out to investigate the effects of dyeing conditions, mordanting on dye uptake, color, morphological change, and color fastness. Considering shrinkage of eel leather caused by dyeing, the optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature and 60 min of dyeing time at 1:100 of bath ratio, and color of the dyed eel leather was Y to YR Munsell series. In order to prevent the degradation of leather from microbe, we conducted combination dyeing with marigold and hinoki cypress leave colorants. In this case, the combination dyed eel leathers showed excellent antimicrobial activity with above 99% bacterial reduction rate against S. aurieus and K. pneumoniae. It was confirmed that all of the dyed eel leathers were sufficient to meet the Korean Standard for color fastness of leather products. It can be applied practically for the development of eco-friendly functional leather by utilizing some useful active components extracted from plant resources and by recycling food wastes.

• Korean Journal of Metals and Materials
• /
• v.48 no.2
• /
• pp.154-162
• /
• 2010

A fundamental study of the distillation behavior of ferromanganese alloy melts was carried out at 1773 K and 0.1333 kPa (=1 Torr). During the distillation of ferromanganese alloy melts under reduced pressure, manganese vaporizes preferentially to phosphorus and other solute elements. High purity manganese metal with a very low content of solute elements can be obtained by distillation of ferromanganese alloy melts. The evaporation of manganese is suppressed as the carbon content of ferromanganese alloy melt increases due to the decrease of activity and vapor pressure of the manganese. When the carbon content of ferromanganese alloy melt is high, melt droplets are ejected from the bath, especially in the early stages of the distillation, and the solute elements in the splashed droplets contaminate the condensed material. The ejection of melt droplets is presumed to be caused by the increase of melting temperature and viscosity of the surface layer of melt due to the enrichment of solute elements such as carbon and iron.

• Parasites, Hosts and Diseases
• /
• v.59 no.1
• /
• pp.15-22
• /
• 2021

Artemisinin resistance (ART) has been confirmed in Greater Mekong Sub-region countries. Currently, C580Y mutation on Pfkelch13 gene is known as the molecular marker for the detection of ART. Rapid and accurate detection of ART in field study is essential to guide malaria containment and elimination interventions. A simple method for collection of malaria-infected blood is to spot the blood on filter paper and is fast and easy for transportation and storage in the field study. This study aims to evaluate LAMP-SNP assay for C580Y mutation detection by introducing an extra mismatched nucleotide at the 3' end of the FIP primer. The LAMP-SNP assay was performed in a water bath held at a temperature of 56℃ for 45 min. LAMP-SNP products were interpreted by both gel-electrophoresis and HNB-visualized changes in color. The method was then tested with 120 P. falciparum DNA from dried blood spot samples. In comparing the LAMP-SNP assay results with those from DNA sequencing of the clinical samples, the 2 results fully agreed to detect C580Y. The sensitivity and specificity of the LAMP-SNP assay showed 100%. There were no cross-reactions with other Plasmodium species and other Pfkelch13 mutations. The LAMP-SNP assay performed in this study was rapid, reliable, and useful in detecting artemisinin resistance in the field study.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.23-34
• /
• 2023

Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment. Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37℃. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the "stressed" position in a 37℃ water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days. Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level. Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.73-73
• /
• 2003

The present study examined the possibility of long term storage, by cryopreservation in liquid nitrogen, of the sperm of Filefish (Thamnaconus septentrionalis), and the changes in motility, survival rate and ultrastructure of the sperm after freezing and thawing. The sperm was collected by stripping and stored on ice until experiments. For selection of the immobilizing solution, diluted artificial seawater (ASW) of 20, 30 and 40% were tested. The sperm motility was significantly inhibited in 30% ASW, and restored entirely after 100% ASW was added again. Two cryoprotectants, dimethyl sulfoxide ($Me_2$SO) and glycerol, were added to 30% ASW to formulate the extenders at the concentrations between 5 to 20% by volume for freezing. The sperm was diluted at the ratio of 1 :6 with the extenders, inserted into 0.5ml plastic straws and frozen at a freezing rate of $50^{\circ}C$/min to $-100^{\circ}C$ after equilibration for 10 min at room temperature, followed by plunging into liquid nitrogen. The straws were thawed in a $30^{\circ}C$ water bath for 15 sec. The highest post-thawed sperm motility and survival rate were obtained with 5% glycerol Afterward, the effect of different freezing rates was examined using 5% glycerol as a cryoprotectant, and the rate of $20^{circ}C/min to $-80^{\circ}C$ showed the best result Some ultrastructural changes of sperm, such as the detachment of plasmatic and nuclear membranes, destruction of mitochondria, were observed after cryopreservation. Morphological normality of the sperm in 5% glycerol frozen at the ratio of 1$0^{\circ}C$/min to $-80^{\circ}C$ was better than that of others.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.285-294
• /
• 2010

The purpose of this study was to evaluate the viability of periodontal ligament cells of rat teeth after low-temperature preservation under high pressure by means of MTT assay, WST-1 assay. 12 teeth of Sprague-Dawley white female rats of 4 week-old were used for each group. Both side of the first and second maxillary molars were extracted as atraumatically as possible under tiletamine anesthesia. The experimental groups were group 1 (Immediate extraction), group 2 (Slow freezing under pressure of 3 MPa), group 3 (Slow freezing under pressure of 2 MPa), group 4 (Slow freezing under no additional pressure), group 5 (Rapid freezing in liquid nitrogen under pressure of 2 MPa), group 6 (Rapid freezing in liquid nitrogen under no additional pressure), group 7 (low-temperature preservation at $0^{\circ}C$ under pressure of 2 MPa), group 8 (low-temperature preservation at $0^{\circ}C$ under no additional pressure), group 9 (low-temperature preservation at $-5^{\circ}C$ under pressure of 90 MPa). F-medium and 10% DMSO were used as preservation medium and cryo-protectant. For cryo-preservation groups, thawing was performed in $37^{\circ}C$ water bath, then MTT assay, WST-1 assay were processed. One way ANOVA and Tukey HSD method were performed at the 95% level of confidence. The values of optical density obtained by MTT assay and WST-1 were divided by the values of eosin staining for tissue volume standardization. In both MTT and WST-1 assay, group 7 ($0^{\circ}C$/2 MPa) showed higher viability of periodontal ligament cells than other group (2-6, 8) and this was statistically significant (p < 0.05), but showed lower viability than group 1, immediate extraction group (no statistical significance). By the results of this study, low-temperature preservation at $0^{\circ}C$ under pressure of 2 MPa suggest the possibility for long term preservation of teeth.