• 전기학회논문지P
• /
• 제57권3호
• /
• pp.255-259
• /
• 2008

In this paper, a current-mode integrator for low-voltage, low-power analog integrated circuits is presented. Using the proposed current-mode integrator, the baseband analog filter is designed for WCDMA wireless communication. To verify the proposed current-mode integrator circuit, Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS parameter is performed and achieved 44.9dB gain, 15.7MHz unity gain frequency. The described 3rd-order current-mode baseband analog filter is composed of the proposed current-mode integrator, and SFG(Signal Flow Graph) method is used to realize the baseband filter. The simulated results show 2.12MHz cutoff frequency which is suitable for WCDMA baseband block.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.997-999
• /
• 2005

블루투스 베이스밴드를 효율적으로 테스트하기 위하여, 블루투스 버전 1.1에서는 TSS를 (Test Suite Structure) 제공한다. TSS에서 정의한 part.1-3의 부분에 대한 테스트를 구현함으로써 블루투스 베이스밴드가 인증을 받을 수 있는 것이다. 본 고에서는 TSS vl.0에서 제시하는 테스트 스펙에 근거하여 블루투스 베이스밴드에 대한 설계를 검증하고 테스트 하는 방법에 대해서 논한다. 또한 테스트를 수행하기 위한 다양한 시나리오와 가능성에 대해서 논한다.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2008년도 제7회 추계학술대회 및 정기총회
• /
• pp.185-188
• /
• 2008

• ETRI Journal
• /
• 제25권1호
• /
• pp.9-18
• /
• 2003

We mathematically analyze the passband vestigial sideband (VSB) system for the Advanced Television Systems Committee (ATSC) digital television standard and present a baseband-equivalent VSB model. The obtained baseband VSB model is represented by convolution of the transmission signal (before modulation) and the baseband equivalent of the complex VSB channel. Due to the operation of the physical channel as an RF passband and the asymmetrical property of VSB modulation, it is necessary to use a complex model. However, the passband channel may be reduced to an equivalent baseband. We show how to apply standard channel model information such as delay, gain, and phase for multiple signal paths to compute both the channel frequency response with a given carrier frequency and the resulting demodulated impulse response. Simulation results illustrate that the baseband VSB model is equivalent to the passband VSB model.

• 디지털산업정보학회논문지
• /
• 제4권4호
• /
• pp.9-19
• /
• 2008

In this paper, it is studied anti-collision algorithm based on the transmission protocol for RFID baseband system of the lSO/IEC 18000-6 Type-C regulation and designed the baseband part of RFID reader system using FPGA. To compensate this weak point of the slot random aloha algorithm which must have a long time to be dumped before deciding an appropriate slot size according to the number of surrounding tag, we suggested how to apply Bit By Bit algorithm to be able to recognize the tag when the tag is clashing. The design of the baseband part in the RFID reader system is accomplish by use of the ISE9.1i and I made an experiment on it targeting Spartan2. Construction verification is measured each block through Logic Analyzer and I can verify it has no error. I also compared and analyzed the performance between proposed algorithm and past algorithm and verified the improvement of performance.

• 한국멀티미디어학회논문지
• /
• 제5권2호
• /
• pp.206-214
• /
• 2002

본 논문에서는 블루투스 표준 1.0b를 기반으로 이동전화, 노트북, PDA 등 각종 이동 가능한 장치들을 무선으로 연결시켜주는 근거리 무선통신용 블루투스의 기저 대역 시스템을 설계하였다. 즉, 기저 대역 시스템의 각 기능블록인 패킷생성 블록, HEC와 CRC 기능블록, Whitening/Dewhitening 기능블록, FEC 기능블록, 입출력 블록(TX, RX 루틴), 클럭 생성 기능블록, 주파수 선별 기능블록, 그리고, 패킷 제어 블록 및 전체 데이터 처리절차를 Verilog HDL 코드로 설계하였으며, Model Sim 툴을 이용하여 기능을 검증하였다.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1813-1820
• /
• 2000

In this paper we proposed an efficient multiresolution motion estimation(MRME) algorithm using half-pixel accuracy motion estimation (HPAME) and characteristics of motion vectors in the baseband. Conventional MRME method needs exact motion vectors in the baseband because those are used as initial motion vectors in higher frequency subbands. Therefore the proposed method uses HPAME to estimate the motion vectors exactly in the baseband. Based on the characteristics of these motion vectors the motion vectors in the higher frequency subbands are selectively estimatied. That is motion vectors in the higher frequency subbands are estimated only for the blocks which have the half-pixel accuracy motion vectors in the baseband. In the proposed method by using HPAME in the baseband and selective motion estimation in the higher frequency subbands we can obtain reconstructed image with the similar quality with the conventional method though we reduce the computational complexity and the bit rate considerably.

• 한국위성정보통신학회논문지
• /
• 제5권2호
• /
• pp.97-103
• /
• 2010

본 논문에서는 S-대역 위성/지상 겸용 다중빔 위성통신시스템에 적용을 위한 효율적인 기저대역 패킷 스위치 설계 방안을 제시하기 위하여 설계 요구사항과 고려사항들을 분석하고 기존의 기저대역 패킷 스위칭 기법들의 요소기술과 특성을 비교 분석하였다. 위성 기저대역 패킷 스위치의 설계 요구사항 정립을 위하여 기저대역 패킷 스위치의 요구기능, 시스템 규격, 통신서비스 종류와 성능요구사항을 분석하였고, 기존의 레이어-2 및 레이어-3 패킷 스위치 특성, 스위칭 프로토콜 특성, 패킷 스위치 구조 특성들에 대한 비교 분석 결과를 기반으로 MPEG 기반의 레이어-2 위성 기저대역 패킷 스위치의 하드웨어 설계 방안을 제시하였다.

• 로봇학회논문지
• /
• 제4권1호
• /
• pp.1-9
• /
• 2009

Radio Frequency Identification (RFID) is an automatic identification method. Information such as identification, logistics history, and specification of products are written and stored into the memory of RFID tags (that is, transponders), and retrieved through RF communication between RFID reader device and RFID tags. RFID systems have been applied to many fields of transportation, industry, logistics, environment, etc in order to improve business efficiency and reduce maintenance cost as well. Recently, some research results are announced in which RFID devices are combined with other sensors for mobile robot localization. In this paper, design of multi-protocol baseband for RFID reader device is proposed, and the baseband modem is implemented into SoC (System On a Chip). The baseband modem SoC for multi-protocol RFID reader is composed of several IP (Intellectual Property) blocks such as multi-protocol blocks, CPU, UART(Universal Asynchronous Receiver and Transmitter), memory, etc. As a result, the SoC implemented with FPGA(Field Programmable Gate Array) is applied to real product. It is shown that the size of RFID Reader module designed with the FPGA becomes smaller, and the SoC chip price for the same function becomes cheap. In addition, operation performance could be the same or better than that of the product with no SoC applied.

• ETRI Journal
• /
• 제31권6호
• /
• pp.795-802
• /
• 2009

This paper presents the design of an advanced terrestrial digital multimedia broadcasting (AT-DMB) baseband receiver SoC. The AT-DMB baseband is incorporated into a hierarchical modulation scheme consisting of high priority (HP) and low priority (LP) stream decoders. The advantages of the hierarchical modulation scheme are backward compatibility and an enhanced data rate. The structure of the HP stream is the same as that of the conventional T-DMB system; therefore, a conventional T-DMB service is possible by decoding multimedia data in an HP stream. An enhanced data rate can be achieved by using both HP and LP streams. In this paper, we also discuss a time deinterleaver that can deinterleave data for a time duration of 384 ms or 768 ms. The interleaving time duration is chosen using the LP symbol mapping scheme. Furthermore, instead of a Viterbi decoder, a turbo decoder is adopted as an inner error correction system to mitigate the performance degradation due to a smaller symbol distance in a hierarchically modulated LP symbol. The AT-DMB baseband receiver SoC is fabricated using 0.13 ${\mu}m$ technology and shows successful operation with a 50 mW power dissipation.