• 제목/요약/키워드: Base number

검색결과 2,067건 처리시간 0.034초

OPTIMZATION OF A PIN FIN BASED ON THE INCREASING RATE OF HEAT LOSS

  • Kang, Hyung-Suk
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제12권1호
    • /
    • pp.25-32
    • /
    • 2008
  • A pin fin is optimized based on the increasing rate of heat loss by using a two-dimensional analytic method. The optimum heat loss, corresponding optimum thermal resistance and fin length are presented as a function of the fin base thickness, convection characteristic numbers ratio, fin outer radius and ambient convection characteristic number. One of the results shows that both the optimum heat loss and fin length decrease linearly whereas the optimum thermal resistance increases very slightly with increase of the fin base thickness.

  • PDF

Further seismic displacement PSDF results

  • Morales, C.A.
    • Structural Engineering and Mechanics
    • /
    • 제34권5호
    • /
    • pp.663-666
    • /
    • 2010
  • The spectral content of ground displacement of the 10 largest last California earthquakes is studied. Specifically, the power spectral density function of the critical horizontal-component record of the closest-to-epicenter station is analyzed in each case. The results permit to state that horizontal ground displacement is a narrow-band process. This fact was previously noticed while trying to solve the large-base-displacement problem in isolated structures and it was fundamental in the solution of this issue; however, these preliminary results were limited in number to enable a statement like the foregoing one. Thus, the broader results presented herein were necessary.

Sprue의 길이와 주조압이 비귀금속 합금의 주조성에 미치는 영향에 관한 연구 (A STUDY ON THE CASTABILITY OF BASE METAL ALLOYS WHICH ARE SPRUE LENGTH AN CASTING PRESSURE)

  • 최석순
    • 대한치과기공학회지
    • /
    • 제11권1호
    • /
    • pp.89-93
    • /
    • 1989
  • The purpose of this study was to evaluate the effect of sprue length and casting pressure on the relative castability of the base metal alloys, commonly used to make porcelain metal restoration. Samples of total 30 were constucted and devided into 6 groups according to three variables (low, medium, high). The total number of complety cast squares were counted, verified and recorded. The results of this 1. main effect of casting pressure was statistically significant.(P<0.05). 2. main effect of sprue length was not statistically significant.

  • PDF

다중 엔트로피를 기반으로 하는 새로운 결정 트리 생성기 MEC (MEC; A new decision tree generator based on multi-base entropy)

  • 전병환;김재희
    • 한국통신학회논문지
    • /
    • 제22권3호
    • /
    • pp.423-431
    • /
    • 1997
  • A new decision tree generator MEC is proposed in this paper, which uses the difference of multi-base entropy as a consistent criterion for discretization and selection of attributes. To evaluate the performance of the proposed generator, it is compared to other generators which use criteria based on entropy and adopt different discretization styles. As an experimental result, it is shown that the proposed generator produces the most efficient classifiers, which have the least number of leaves at the same error rate, regardless of whether attribute values constituting the training set are discrete or continuous.

  • PDF

FUSS-NARAYANA STATISTICS

  • Kim, Sangwook
    • 충청수학회지
    • /
    • 제35권4호
    • /
    • pp.335-343
    • /
    • 2022
  • We show that valleys, high peaks, and modular ascents are statistics of Fuss-Catalan paths having a distribution given by the Fuss-Narayana number. We prove the results using the Cycle Lemma and provide bijections among them. We also show that relative peaks are independent of the base path. In particular, valleys and high peaks can be obtained from relative peaks by fixing the base path in certain ways.

Detached Splitter를 이용한 원형 단면 실린더의 항력제어 (Control of Drag Force on a Circular Cylinder using a Detached Splitter)

  • 선승한;황종연;양경수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집E
    • /
    • pp.253-258
    • /
    • 2001
  • Control of drag force on a circular cylinder using a detached splitter plate is numerically studied for laminar flow. A splitter plate with the same length as the cylinder diameter(d) is placed horizontally in the wake region. Its position is described by the gap ratio(G/d), where G represents the gap between the cylinder base point and the leading edge of the plate. The drag varies with the gap ratio; it has the minimum value at a certain gap ratio for each Reynolds number. The drag sharply increases past the optimum gap ratio; this seems to be related to the sudden change in the bubble size in the wake region. This trend is consistent with the experimental observation currently available in case of turbulent flow. It is also found that the net drag coefficient significantly depends on the variation of base suction coefficient.

  • PDF

횡단가스 유동에 분사되는 액체제트의 분무특성 (Characteristic of Liquid Jet in Subsonic Cross-flow)

  • 고정빈;이관형;구자예
    • 한국분무공학회지
    • /
    • 제10권1호
    • /
    • pp.35-42
    • /
    • 2005
  • The present study has numerically and experimentally investigated the spray behavior of liquid jet injected in subsonic cross-flow. The corresponding spray characteristics are correlated with jet operating parameters. The spray dynamics are known to be distinctly different in the three regimes: the column, the ligament and the droplet regimes. The behaviors of column, penetration and breakup of liquid jet have been studied. Numerical and physical models are base on a modified KIVA code. The primary atomization is represented by a wave model base on the KH(Kelvin-Helmholtz) instability that is generated by a high interface relative velocity between the liquid and gas flows. In odor to capture the spray trajectory, CCD camera has been utilized. Numerical and experimental results indicate that the breakup point is delayed by increasing gas momentum ratio and the penetration decreases by increasing Weber number.

  • PDF

A Differential Data Replicator in Distributed Environments

  • Lee, Wookey;Park, Jooseok;Sukho Kang
    • 정보기술과데이타베이스저널
    • /
    • 제3권2호
    • /
    • pp.3-24
    • /
    • 1996
  • In this paper a data replicator scheme with a distributed join architecture is suggested with its cost functions and the performance results. The contribution of this scheme is not only minimizing the number of base relation locks in distributed database tables but also reducing the remote transmission amount remarkably, which will be able to embellish the distributed databse system practical. The differential files that are derived from the active log of the DBMS are mainly forcing the scheme to reduce the number of base relation locks. The amount of transportation between relevant sites could be curtailed by the tuple reduction procedures. Then we prescribe an algorithm of data replicator with its cost function and show the performance results compared with the semi-join scheme in their distributed environments.

  • PDF

경제성을 고려한 이동통신망의 최적 주파수 운용 방안 (Economical Approach to Optimal Spectrum Operation in Mobile Networks)

  • 양원석
    • 경영과학
    • /
    • 제27권2호
    • /
    • pp.21-29
    • /
    • 2010
  • We consider an economic approach for spectrum operations in mobile networks. We present the investment function of base stations according to the number of FAs assuming the linearity of cell splitting. We show that there is an economic amount of spectrum which corresponds to the optimal number of FAs that minimizes the investment. We analyze the impact of the cost structure and the traffic distribution in base stations on the economic amount of spectrum. This paper is applicable to an economic spectrum operation for mobile operators. In addition, the national regulatory authority can use the economic amount of spectrum as the minimal amount for spectrum allocation.

퍼스널 컴퓨터용 데이타베이스 프로그램을 이용한 목재 재감의 효율적 이용 (Utilization of Wood Collections Using a Database Program for Personal Computers)

  • 이경은;박원규
    • Journal of the Korean Wood Science and Technology
    • /
    • 제20권4호
    • /
    • pp.43-48
    • /
    • 1992
  • A database system for retrieving the information on wood collections was developed using the D-BASE III Plus program for personal computers. Basic information of biological, physical, chemical and technological properties was added to the data which used to be employed in simple card systems, such as identification number, species name and collection site. All information was fast and reliably retrievable. This paper also discussed the results of a survey on wood collections housed at domestic colleges and research institutes.

  • PDF