• Journal of Nutrition and Health
• /
• 제20권6호
• /
• pp.442-455
• /
• 1987

The purpose of the study were to assist foodservice managers in complex decision making by utilizing computerized cost accounting system and to relieve managers from repetitive and routine tasks so that more adequate patient care and consultation can be provided. The scope of the computer-assisted cost accounting system consists of budget, menu planning, purchasing, inventory, cost control and financial reporting. The content of the computerized system are summarized as follows ; 1) For budgeting monthly income was estimated by calculating unit cost of each meal and forecasting serving numbers. The actual serving numbers for patients and employees were totaled everyday, and utilized as the basic data base for estimating income and planning menu. The monthly lists of meal sensus were generated. 2) for menu planning concersion factors were computed based on the standarized recipe for 50 servings. Daily menus for patients and employees which include total amounts of each ingredient and cost analyzed information were generated. 3) Daily and monthly purchasing report for each food item classified by patient and employee meals were generated. 4) Inventory transactions such as recipts and issues were totalized daily for each stocked item, and monthly inventory reports were generated. 5) Cost analysis reports for each menu item were generated into two ways based on the budget coat as well as the purchasing cost. 6) Editing new recipes and updating food costs change to the data base were carried out. 7) Financial reports were generated monthly, first-half and second-half of the year, and yearly basis.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.133-151
• /
• 1997

Industrial ventilation is one of crucial engineering measures to protect workers from hazardous airborne contaminants. Designing a ventilation system is not an easy task. To solve this problem, U.S. computer programs and softwares have been developed. In Korea, a software, called as VPMC(Velocity Pressure Method Calculation), was developed by Korean Industrial Safety Corporation. Since VPMC is a DOS-based software, it could not be a user-friendly one. In this study, a Windows-based software was thus developed to overcome the difficulty in using a software for designing the ventilation system. As far as we know, this kind of Windows-based software is the first in the world. But this software should be kept being revised. The future work would include introduction of GUI(Graphic User Interface) and enhancement of editing functions by using Data-Base programs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.77-80
• /
• 2002

In this paper, We have studied for guaranteeing the clear display of MPEG-2 video sequence when conduct splicing of MPEG-2 system streams. we focus on the PES domain splicing considering video sequence. And we wish to make a base on the TS or PS domain splicing considering video sequence. For that, first, we compared and analyzed problems that is raised when different two PES streams are spliced and effects that affect the video sequence. And based on this analysis, we have searched for methods that resolve the cause of problems that can be happened in the display of video sequence directly in PES domain.

• 대한공간정보학회지
• /
• 제2권2호
• /
• pp.131-142
• /
• 1994

현재 지형공간정보체계의 기본지도 자료 층을 생성하는 방법으로 기존도면을 수치화 하는 방법과 감지기로부터 영상을 취득하여 전산기로 자료편집을 하는 해석도화방법이 사용되고 있다. 그러나, 해석도화방법과 기존도면을 디지타이징하는 방법은 기술적으로 훨씬 복잡하고, 사용장비 및 작업공정면에서 많은 비용과 시간이 소요되는 단점을 가진다. 본 연구에서는 광양지역을 촬영한 항공사진에서 주거지와 교외의 농경지로 구분하여 대상지역을 선정하였으며, 항공사진 촬영축척은 1/6,000이었다. 항공사진을 스캐너로 주사하여 수치항공영상을 생성한 후, 히스토그램 균등화의 영상처리기법을 적용하여 영상의 질을 개선하고, 개선된 영상에 임케값 방법과 경계추출기법을 적용하므로써 지형공간정보체계 자료기반의 자료층을 자동갱신하는 방법을 개발하였다. 또한, 영상분할기법을 이용하여 얻은 영상, 원 영상 및 히스토그램의 처리결과로 얻은 영상의 특성들을 비교 분석하였다. 본 연구를 통한 영상분할기법으로 지형공간정보체계의 자료기반에 관한 자료층 제작의 연산법을 정립하므로써 지형공간정보체계를 신속하고 경제적으로 처리할 수 있음을 입증할 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제10권5호
• /
• pp.115-123
• /
• 2010

정보통신기술의 발달로 기존의 방식과는 달리 다양한 플랫폼에서 풀 브라우징 서비스를 통해 영상 콘텐츠의 제공이 가능하게 되었다. 이러한 패러다임의 변화는 소비자의 수용태도에 변화를 줄 뿐만 아니라, 영상 콘텐츠 제작 방식에도 변화를 요구한다. 하지만 영상 콘텐츠의 많은 부분이 모바일 플랫폼에 맞추어 적당히 변형되거나 사이즈 변환과 같은 기본적인 변환으로 수용자들에게 서비스되고 있다. 이것은 모바일 특성에 맞는 콘텐츠 유형 및 제작이 아닌 사용자에게 전달되는 방식으로의 변화만을 의미하므로, 모바일 콘텐츠 특성에 맞는 영상제작 및 편집과 같은 미학적인 면에서의 제작방식에 변화가 요구되어진다. HD영상의 전환으로 인하여 카메라 앵글, 구도, 조명등과 같이 제작 방식에 변화가 생긴 것과 마찬가지로 풀브라우징 서비스에 맞는 영상제작 기법으로 변화되어야 한다. 본 연구는 HD 영상제작에 따른 제작 방식 변화를 바탕으로 스마트 폰 시장 확장에 따른 모바일 기기에 적합한 동영상 편집기법에 대한 방향을 제안하고자 한다. 이를 위해, 현재 이러닝 제작에 사용되고 있는 화면 전환기법과 편집기법을 영상제작에 응용하거나, 종횡비의 변화, 다중화면 기법 등과 같은 다양한 편집기법을 이용하여 스마트 폰 플랫폼에 적합한 영상 변환 및 편집 방법을 제시하고자 한다. 이러한 새로운 시도들은 기존의 웹이 가지고 있었던 개방성, 적시성과 같은 특성들을 모바일에 적용하여 줌으로써 새로운 패러다임을 이끌고 가며 플랫폼으로써 자리를 잡아갈 것이다. 또한 개인 문화 영역으로 확대되어 단순 의사전달도구에서 벗어나 표현도구와 놀이도구로써 자리 잡을 것이다.

• Journal of Periodontal and Implant Science
• /
• 제46권1호
• /
• pp.22-34
• /
• 2016

Purpose: Gingival recession is a major esthetic concern and may lead to root sensitivity during periodontal treatment. Coronally advanced flaps (CAFs) with and without acellular dermal matrix (ADM) are widely used in root coverage procedures. The aim of this study was to analyze the efficacy of CAF in combination with ADM in the treatment of gingival recession. Methods: PubMed, The Cochrane Library, and Embase were used to identify relevant articles. The articles were screened, data were extracted, and the quality of the studies was assessed by three reviewers with expertise in clinical practice, trials, statistics, and biomedical editing. The clinical endpoints of interest included changes in recession, probing depth (PD), clinical attachment level (CAL), and keratinized tissue (KT). Results: Ten randomized controlled trials were identified, including six studies that compared CAFs with ADM and CAFs using connective tissue grafting (CTG) and four studies that compared CAFs with or without ADM. No statistically significant differences were found between the use of ADM and CTG, whereas statistically significant differences were found between groups in which ADM and CAF were combined and groups that underwent CAF alone with regard to recession coverage, CAL, and KT. The combination of CAF with an ADM allograft achieved more favorable recession coverage and recovery of CAL and KT than CAF alone. Conclusions: The results from the ADM and CTG groups suggest that both procedures may be equally effective in clinical practice. Given the limitations of this study, further investigation is needed to clarify the effectiveness of ADM and CAF in clinical practice.

• 인터넷정보학회논문지
• /
• 제5권1호
• /
• pp.1-13
• /
• 2004

클래스 단위의 응용 시스템 구성은 코드 중심의 컴포넌트 추상화로 각 요소의 독립성 유지 및 재사용이 구현상에만 치우쳐 효과가 미흡하다. 따라서 상위의 개발 단계에 대한 객체 지향적 접근을 위해서는 설계 문제의 추상화와 특정 영역의 일반적인 해결에 대한 정보 표현 및 구성요소 상호 간의 관련성을 패턴을 통하여 나타낼 필요가 있다. 또한 기존 시스템의 성능을 변경, 개선하고 변화하는 환경에 적응하기 위해서는 기존 시스템을 실험, 분석함으로써 정확한 이해를 하고 나아가 재사용 자원으로 활용할 수 있는 소프트웨어 역공학이 필요하다. 따라서 본 논문에서는 기존 객체지향 시스템 코드에서 설계 패턴 추출을 위한 역공학 적용에 관한 타당성과 설계 패턴 자동 추출을 위한 알고리즘을 Java를 적용하여 살펴보고 설계 패턴의 자동 추출을 위한 역공학 및 패턴 재사용을 위한 자동화 도구의 아키텍쳐를 설계 구현한다.

• Parasites, Hosts and Diseases
• /
• 제43권4호
• /
• pp.149-156
• /
• 2005

Four hundred and sixty five randomly selected clones from a cDNA library of Blattella germanica were partially sequenced and searched using BLAST as a means of analyzing the transcribed sequences of its genome. A total of 363 expressed sequence tags (ESTs) were generated from 465 clones after editing and trimming the vector and ambiguous sequences. About $42\%$ (154/363) of these clones showed significant homology with other data base registered genes. These new B. germanica genes constituted a broad range of transcripts distributed among ribosomal proteins, energy metabolism, allergens, proteases, protease inhibitors, enzymes, translation, cell signaling path-ways, and proteins of unknown function. Eighty clones were not well-matched by database searches, and these rep-resent new B. germanica-specific ESTs. Some genes which drew our attention are discussed. The information obtained increases our understanding of the B. germanica genome.

• 한국CDE학회논문집
• /
• 제16권3호
• /
• pp.178-186
• /
• 2011

Static CAD models are the CAD models that do not have feature information and modeling history. These static models are generated by translating CAD models in a specific CAD system into neutral formats such as STEP and IGES. When a CAD model is translated into a neutral format, its precious feature information such as feature parameters and modeling history is lost. Once the feature information is lost, the advantage of feature based modeling is not valid any longer, and modification for the model is purely dependent on geometric and topological manipulations. However, the capabilities of the existing methods to modify static CAD models are limited, Direct modification methods such as tweaking can only handle the modifications that do not involve topological changes. There was also an approach to modify static CAD model by using volume decomposition. However, this approach was also limited to modifications of protrusion features. To address this problem, we extend the volume decomposition approach to handle not only protrusion features but also depression features in a static CAD model. This method first generates the model that contains the volume of depression feature using the bounding box of a static CAD model. The difference between the model and the bounding box is selectively decomposed into so called the feature volume and the base volume. A modification of depression feature is achieved by manipulating the feature volume of the static CAD model.

• Genomics & Informatics
• /
• 제5권2호
• /
• pp.68-76
• /
• 2007

Due to the increasing interest in SNPs and mutational hot spots for disease traits, it is becoming more important to define and understand the relationship between SNPs and their flanking sequences. To study the effects of flanking sequences on SNPs, statistical approaches are necessary to assess bias in SNP data. In this study we mainly applied Markov chains for SNP sequences, particularly those located in intronic regions, and for analysis of in-del data. All of the pertaining sequences showed a significant tendency to generate particular SNP types. Most sequences flanking SNPs had lower complexities than average sequences, and some of them were associated with microsatellites. Moreover, many Alu repeats were found in the flanking sequences. We observed an elevated frequency of single-base-pair repeat-like sequences, mirror repeats, and palindromes in the SNP flanking sequence data. Alu repeats are hypothesized to be associated with C-to-T transition mutations or A-to-I RNA editing. In particular, the in-del data revealed an association between particular changes such as palindromes or mirror repeats. Results indicate that the mechanism of induction of in-del transitions is probably very different from that which is responsible for other SNPs. From a statistical perspective, frequent DNA lesions in some regions probably have effects on the occurrence of SNPs.