• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.260-261
• /
• 2003

It is recognized that the magnetization reverses with a sequence of discrete and jerky jumps, known as the Barkhausen effect. Recently, interest in the Barkhausen effect has grown as it is a good example of dynamical critical behavior, evidenced by experimental observation of a power law distribution of the Barkhausen jump size. So far, most experimental studies have been carried out on bulk samples using a classical inductive technique, which is difficult to apply to thin film samples mainly due to the ]ow signal intensity. For this reason, very few experiments have been done on two-dimensional ferromagnetic thin films. In this talk, we report a direct domain observation of Barkhausen avalanche at criticality in Co and MnAs thin films investigated by means of a magnetooptical microscope magnetometer (MOMM), capable of time-resolved domain observation with an image grabbing rate of 30 frames/s in real time. In Fig. 1, we demonstrate a series of six representative domain-evolution patterns of 25-nm Co film observed successively by means of the MOMM, where one can directly witness Barkhausen avalanche.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 춘계연구발표회 논문개요집
• /
• pp.70-71
• /
• 2002

No Abstract, See Full Text

• 한국자기학회지
• /
• 제4권2호
• /
• pp.142-149
• /
• 1994

두께가 0.30 mm, 0.27 mm인 3% 방향성 규소강판에서 표면 선긋기의 간격(39~1.22 mm)과 집합조직(texture) 방향에 대한 선긋기 각도의 변화($90^{\circ}~50^{\circ}$)에 따라 Barkhausen Noise를 측정하였다. 두께 0.27 mm의 시편에서 선긋기를 하지 않았을 때와 선긋기의 간격이 39 mm인 경우 에 대체로 Barkhausen noise envelope은 두개의 peak 현상을 보였으며, 그 현상은 $180^{\circ}$ 자구벽(domain wall)이 생성과 소멸과정을 거듭할 때 많은 activation energy가 필요함에 따른 것으로 설명할 수 있었다. 선긋기 횟수를 늘려감에 따라 즉 선긋기의 간격이 줄어듦에 따라 Barkhausen noise envelope의 크기값이 감소하였지만, 선간격 9.75 mm부터는 감소현상이 둔화되는 것으로 나타났다. 이는 선긋기 획수가 늘어남에 따라 선긋기 근처에서 $180^{\circ}$ 자구의 생성과 소멸이 쉽게 일어나기 때문에 Barkhausen Noise의 크기가 감소하는 것으로 설명할 수 있다. 이러한 현상은 0.30 mm의 시편에서도 유사하게 설명될 수 있었다. Barkhausen noise power는 선긋기 간격이 줄어듦에 따라 감소하였으며, 각도변화에 따른 결과는 $50^{\circ}$ 근처에서 가장 적은 값을 보였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.231-234
• /
• 2000

In relation to a non-destructive evaluation of irradiation damage of micro-structure of interstitial, void and dislocation, the changes in the hysteresis loop and Barkhausen noise amplitude and the harmonics frequency due to neutron irradiation were measured and evaluated. The Mn-Mo-Ni low alloy steel of reactor pressure vessel was irradiated to a neutron fluence of $2.3\times10^{19}n/cm^2$ $(E\ge1MeV)$ at $288^{\circ}C.$The saturation magnetization of neutron irradiated metal did not change. Neutron irradiation caused the coercivity to increase, whereas susceptibility to decrease. The amplitude of Barkhausen noise parameters associated with the domain wall motion were decreased by neutron irradiation. The spectrum of Barkhausen noise was analyzed with an applied frequency of 4Hz and 8Hz, and a sampling time of 50 $\mu$ sec and 20 $\mu$ sec. The harmonic frequency of Joule effect shows 4Hz, 8Hz, 12Hz and 16Hz reflected from an unirradiated specimen. On the contrary, the harmonic frequency disappeared for the irradiated specimen. Harmonic frequency of induced voltage of sinusoidal magnetic field And Spectrum of Barkhausen noise on material is determined.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.59-72
• /
• 1999

In this thesis, we measured the Barkhausen effect of CoFeSiB amorphous ribbon and then investigated its possibility to be used as a sensor material. We used a sample of composition $($Fe_{0.06}$$Co_{0.94}$)_${0.79}$$Si_{2.1}$$B_{18.9}$ with a thickness 12[pm1, width 2.5[rnml and length 5[cm], which was fabricated by a single roll method. In order to improve magnetic characteristics of the sample, we had carried on annealing in the magnetic field and in none magnetic field. And, experimented results to the magnetic characteristics show that the ribbon has large Barkhausen jump even in weak magnetic field below 0.5[0el. From the results, we confirmed that the sample can be used as an magnetic sensor material.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.179.2-179.2
• /
• 2008

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.59-59
• /
• 2004

• 열처리공학회지
• /
• 제5권3호
• /
• pp.157-164
• /
• 1992

Barkhausen noise (BN) is created by the abrupt changes in the magnetization of materials under applied AC magnetizing field. These changes are known to be sensitive to residual and applied stresses. In this study, BN theory was reviewed and it was examined how BN intensity was affected by simultaneous stress, hardness and microstructural changes. Also, magnetoelastic effect was used to evaluate residual stresses through carrying out the cantilever beam test. An increase in BN intensity was observed when applied and residual stress changes from compression into tension. Microstructural softening by tempering also increased the amount of BN. Therefore, the quantitative evaluation of residual stress and microstructural changes will be possible, provided BN method is more studied about various materials through comparing with different stress measuring techniques.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 1996

In this paper, we mention the study on the sensing function of amorphous magneto- striction wire with about 125${\mu}{\textrm}{m}$$\Phi$ in diameter. The wire in fabricated by using injection and quenching method under the high speed rotating water flow. The wire\`s compotion is (Fe$_{75}$ $Co_{25}$)$_{77}$Si$_{8}$B$_{15}$ , and generates sharp Matteucci voltage by large Barkhausen jump effect even the weak magnetic field. In this study, we don\`t use pick-up coil. Instead, we apply external magnetic field of 3.6Oe in the direction orthogonal to the wire. Then, we detect Matteucci voltage of 1.lmV to both side of 20cm amorphous-wire. Thus, we find that the fabricated wire has the function necessary as the high sensitive sensor material.l.al.l.

• 한국자기학회지
• /
• 제5권4호
• /
• pp.251-260
• /
• 1995

Co계 비정질 강자성 합금을 1 Oe 이하의 작은 자장 중에서 큐리 온도 이하로 열처리하면 재현성 있는 비대칭 자기이력곡선이 얻을 수 있다는 사실이 보고된 바 있다. 열처 리시 자장의 방향을 (+)라고 하면 (+)에서 (-)에로의 자화반전은 단 한 번의 비가역적 인 Barkhausen jump에 의해서 이루어지며, (-)에서 (+)로의 자화반전은 완만하고 가역 적이다. 이때 이력곡선의 기울기는 시료의 반자장에 의해 결정된다. 이러한 현상을 비 대칭 자화반전이라 한다. 이력곡선의 모양과 재현성은 열처리시 가하는 자장의 크기, 열처리 온도와 시간, 열처리 분위기 등 열처리 조건과 합금의 조성에 따라 크게 바뀐다. 본 연구는 영자왜 조성인 (Fe/sub 0.06/Co/sub 0.94/)/sub 75/Si/sub 10/B/sub 15/ 비 정질 자성 합금을 100 mOe의 자장하에서 열처리할 때 열처리 온도와 시간이 비대칭 자 화반전에 미치는 영향에 대한 것이다. 자화 반전 효과는 비교적 높은 온도에서 짧은 시간에 생성되나 열처리 시간이 길어질수록 안정화된다.