• 선박안전
• /
• 통권37호
• /
• pp.59-76
• /
• 2014

부선은 타 선박에 비해 운항조건 등의 특성상 많은 어려움과 위험에 노출된 채 해상운송 업무를 수행하고 있으며, 예부선 해양사고는 일반 선박보다 40%이상 높게 나타나고 있다. 본 연구는 부선의 안전운항에 필요한 정량적이고 객관적인 정보를 제공하기 위해 실무에서 가장 많이 사용되고 있는 선수 형상을 지닌 부선을 대상으로, skeg와 bridle이 부선의 회두운동에 미치는 영향 조사를 위한 수조실험을 통해 부선의 동적 거동에 의한 예인장력의 변동을 측정하고, skeg가 선수 형상이 다른 부선의 침로안정성에 미치는 영향을 분석 검증하여 예부선의 안전예항 방안을 도출하였다.

• 대한조선학회지
• /
• 제25권3호
• /
• pp.13-18
• /
• 1988

Three-dimensional turbulent flows over ship sterns are measured by using the hot-wire anemometer and static holes in the wind tunnel. A conventional stern and a barge-type stern are adopted for the present study. Three components of mean velocities, pressures on the hull and six components of Reynolds stresses are measured. Longitudinal velocity contours are more parallel to the hull surface and weak bilge vortices appear on the barges type stern rather than the conventional stern. Those viscous flow patterns may have close relations to improvements of the resistance and propulsion performance, which have been verified in the towing tests. Measured data files are valuable for the ensuing numerical studies.

• 대한조선학회지
• /
• 제8권2호
• /
• pp.1-12
• /
• 1971

This paper describes, firstly, on analytical method of computing the eigenvalues of vertical vibration of ships, taking into account for the distribution of hull weight including added mass and the effect of shear deflection and rotary inertia. The frequency equation is solved by Galerkins method into form of numerical integration. Applying the above described equation, model experiment of vertical vibration was carried out in order to varify the validity of the analytical method of vertical vibration. The model, which was made of acrylite plate, was ship-shaped wall-sided vessel with bulkheads, deck openings, and fore and after peak tank at both ends. The results of experiments carried out both in air and on water showed that the observed natural frequencies and the observed patterns of natural modes of vibration were in good agreement with analytically calculated values for 2,3, and 4-node vibration.

• 대한기계학회논문집A
• /
• 제36권6호
• /
• pp.681-689
• /
• 2012

본 연구에서는 병렬 연결된 해상 크레인을 이용하여 5,000ton 이상의 기가 블록급 대형 중량물을 인양할 때 해상 크레인과 대형 중량물 사이에 연결된 와이어 로프에 작용하는 장력을 계산하기 위해 다물체계 동역학 시뮬레이션을 수행하였다. 이를 위해, 해상 크레인, 바지선, 대형 중량물은 각각 6 자유도 운동을 하고, 이들 사이에는 서로간의 구속에 의한 연성을 가지도록 모델링 하였다. 또한 해상 크레인 및 바지선에 작용하는 외력으로 유체 정역학 힘과 유체 동역학 힘을 고려하였고, 각각의 물체에 독립적으로 작용한다고 가정하였다. 본 시뮬레이션 결과, 향후 해상크레인을 병렬 연결하여 대형 중량물을 인양하는 공법의 안정성을 확인하고 공학적인 지침을 마련할 수 있는 근간이 될 수 있으리라 예상한다.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.595-602
• /
• 2009

Great number of ships has been built by Korean Shipyards since early of 2,000 due to the expanding worldwide trade. Most of shipyards have enlarged the weight of erection block and many blocks have been assembled in block fabrication factories outside the shipyards to reduce the shipbuilding period. Especially, Giga blocks that exceed 2,000 tons are often assembled by the block fabrication factories outside the shipyard. Generally, the blocks are transported to building dock in shipyard by towing barges. Accident can be occurred during the sea transportation and it may bring about not only the delay of delivery but also a disaster on the ocean environments. Transportation condition of GPE (Grand Pre-Erection) block differs from the ocean going conditions of marine vessels. Special consideration should be included before transportation work in order to guarantee the safety of GPE blocks and barge carriers. In this paper, several examples, which have been investigated to set up the safety standard of transportation of the GPE blocks on coastal routes, are introduced. For the barge transportation on coastal sea route, the design criteria are discussed, considering the design wave, the acceleration induced by wave, structural strength, and the fixture condition of blocks.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권3호
• /
• pp.383-390
• /
• 2010

This study is currently giving priority to developing the ship's ballast water treatment system using ozone (Ozone BWTS). The Ozone BWTS was tested in a full scale land-based mobile barge to evaluate performance according to the IMO G8 Guidelines. Test cycles using the mobile-barge were conducted in seawater and brackish water in the vicinity of the Port of Busan and Nakdong River, Republic of Korea. All tests were conducted according to the requirements of the G8 Guidelines. Test results show that the Ozone BWTS meets the Ballast Water Performance Standard contained in Regulation D-2 of the IMO Ballast Water Management Convention, as well as all of the operational, safety, and environmental testing requirements of the G8 Guidelines, as required for type approval of IMO. The study results show that the Ozone BWTS is capable of meeting the Ballast Water Performance Standard under Regulation D-2 of the International Convention for the Control and Management of Ships’ Ballast Water and Sediments, and also the more stringent standards being proposed under US legislation.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.387-394
• /
• 2015

Before salvaging a wrecked ship, the physics-based simulation is needed to predict lifting force before real operation by floating crane or barge. Procedures affecting lifting force for the salvage can be divided into three stages. At the first stage, the bottom breakout force for the wrecked ship to escape from seabed sediment should be calculated. At the second step, the current force acting on the wrecked ship while lifting from the seabed to near sea surface should be considered. Finally, buoyancy change near at the sea surface when the wrecked ship start to escape from the water should be considered. In the previous studies, only the breakout force at the first stage was calculated based on simple assumption of embedment depth and contact area of the wrecked ship. Therefore, we develop a program for salvage simulation including whole stages. It is composed of four modules such as the equations of motion, time integration, force calculation, and visualization. As a result, it is applied to simulate lifting the wrecked ship according to various environmental loads including seabed sediments.

• 한국해안·해양공학회논문집
• /
• 제25권4호
• /
• pp.236-243
• /
• 2013

해상풍력발전기는 주위를 항행하는 선박 및 바지선등과 같은 선박에 의한 충돌피해가 발생할 수 있기 때문에 이에 대한 안정성을 고려해야 한다. 본 연구에서는 선박충돌에 대해 안정성을 고려하기 위해 해상풍력발전기의 선박충돌해석을 수행하고 충돌하중의 불확실성을 고려하기 위해 충돌취약도를 분석하였다. 충돌해석은 해저지반-기초구조물의 상호작용 및 유체를 p-y곡선과 부가질량법으로 고려하였다. 충돌취약도는 선박의 중량과 충돌각, 선박흘수를 변동성으로 고려하여 항복응력에 대한 손상수준을 추정하였으며 취약도를 분석한 결과, 850ton 바지선과 30,000DWT 화물선의 충돌속도에 취약함을 확인하였다.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.34-40
• /
• 2010

When a large ship is advancing in waves, it undergoes hydroelastic response, which affects the structural stability and the fatigue destruction of the ship. Therefore, to predict an accurate hydroelastic response, it is necessary to conduct a thorough analysis of hydroelastic response, including fluid-structure interactions. In this research, the ship is divided into many hull elements, to calculate the fluid forces and wave exciting forces on each element. Using the three-dimensional source distribution method, the calculated fluid forces and wave exciting forces are assigned to nodes of the hull elements. The neighbor nodes are connected with elastic beam elements. We analyzed hydroelastic responses, using the finite elements method.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.312-326
• /
• 2012

This paper considers a fully coupled 3D BEM-FEM analysis for the ship structural hydroelasticity problem in waves. Fluid flows and structural responses are analyzed by using a 3D Rankine panel method and a 3D finite element method, respectively. The two methods are fully coupled in the time domain using a fixed-point iteration scheme, and a relaxation scheme is applied for improve convergence. In order to validate the developed method, numerical tests are carried out for a barge model. The computed natural frequency, motion responses, and time histories of stress are compared with the results of the beam-based hydroelasticity program, WISH-FLEX, which was thoroughly validated in previous studies. This study extends to a real-ship application, particularly the springing analysis for a 6500 TEU containership. Based on this study, it is found that the present method provides reliable solutions to the ship hydroelasticity problems.