• Journal of the Korea Safety Management & Science
• /
• v.8 no.4
• /
• pp.13-23
• /
• 2006

Grip strength provides a quick and objective index of the functional integrity of the upper extremities. It is widely used as an assessment measure in physical and rehabilitation medicine. In this study, maximum voluntary grip strength of 20 college students wearing 5 different gloves were measured using Jamar hand dynamometer. The results show that maximum voluntary grip strength was generally reduced when wearing gloves as compared to bare-handed. More specifically, the grip strength was highest when wearing PVC coated glove or bare-handed and getting lowered as wrist band, rubber, leather, and cotton glove in these order. Depending on the measuring posture of grip strength, shoulder height with arm extended forward was higher than the elbow was flexed 90 degree. Moreover, subjects' demographic factors and hand dimensions were not closely related to the grip strength. It is thus recommended that the proper glove should be provided to reduce the negative consequences including dropping a tool, poorer control of a tool. lower quality work, and increased muscle fatigue and in turn to increase the user safety and satisfaction.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.705-713
• /
• 2003

In mid-August 2002, under clear summer pressure patterns, we carried out an intensive meteorological observation to examine the warming effects due to artificial constructions in a large housing complex. We set an automatic weather system(AWS) at two places in a bare soil surface within a limited development district and an asphalt surface within a large apartment residence area, respectively. As a result of observation, it became clear that the difference of the surface air(ground) temperature between the bare soil surface and its peripheral asphalt area reached about 4$^{\circ}C$(13$^{\circ}C$) at the maximum from diurnal variation of surface temperatures on AWS data. Through the heat balance analysis using measurement data, it became clear that the thermal conditions at two places are dependent on the properties of surface material. The latent heat flux over the bare soil surface reached to about 300 W/㎡, which is more than a half of net radiation during the daytime. On the other hand, it was nearly zero over the asphalt surface. Hence, the sensible heat flux over the asphalt surface was far more than that of the bare soil surface. The sensible heat flux over the asphalt surface showed about 20∼30 W/㎡ during the night. It was released from asphalt surface which have far more heat capacity than that of bare soil surface.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.932-941
• /
• 2012

A powerful interaction mechanism is one of the key elements for the success of smart TVs, which demand far more complex interactions than traditional TVs. This paper proposes a novel interface based on the famous touch interaction model but utilizes long-range bare hand tracking to emulate touch actions. To satisfy the essential requirements of high accuracy and immediate response, the proposed hand tracking algorithm adopts a fast color-based tracker but with modifications to avoid the problems inherent to those algorithms. By using online modeling and motion information, the sensitivity to the environment can be greatly decreased. Furthermore, several ideas to solve the problems often encountered by users interacting with smart TVs are proposed, resulting in a very robust hand tracking algorithm that works superbly, even for users with sleeveless clothing. In addition, the proposed algorithm runs at a very high speed of 82.73 Hz. The proposed interface is confirmed to comfortably support most touch operations, such as clicks, swipes, and drags, at a distance of three meters, which makes the proposed interface a good candidate for interaction with smart TVs.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.142-147
• /
• 2006

3D 센서테이블은 디스플레이가 내장된 테이블 위에서 사용자의 맨손이 움직일 때 그것을 감지하고 반응하는 센싱정보를 처리하도록 만든 것으로 양안시차 방식의 3 차원 입체영상에서 보여지는 가상의 오브젝트와 사람과의 인터렉션이 가능하도록 설계되었다. 본 연구에서는 3 차원 공간에서의 맨손을 이용한 사람과 컴퓨터 간의 인터렉션 방법에 중점을 두고 있는데 맨손의 위치정보와 제스처를 알기 위해서 Electric Field Sensing 기법을 이용하였다. 현재 구현된 3D 센서테이블은 테이블로부터 30cm 이내의 거리에서 움직이는 맨손의 위치와 간단한 제스처를 인식할 수 있다. 이를 통해서 기존의 마우스나 키보드가 가졌던 3 차원 공간에서 사용할 때 불편했던 점들을 해소하고, 직관적이면서도 누구나 사용하기에 쉬운 인터페이스 방법을 제시함으로써 사람과 컴퓨터와의 인터렉션 방법을 확장시킬 수 있다. 또한 기존의 많은 연구에서 맨손을 이용한 기법들이 주로 2D 기반이었던 것에 비하여 본 시스템은 2D뿐 아니라 3 차원 공간에서도 활용할 수 있다는 장점을 가진다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.966-976
• /
• 2017

This study investigated the effects of wearing latex gloves with inner gloves on the skin hydration of the hands. Fifteen young males participated in the following three conditions: bare hand (BH), latex glove (LG), and latex glove with inner glove condition (LGIG) at an air temperature of $28^{\circ}C$ with 50%RH. Subjects typed a book for 120 min. The results were as follows. Skin hydration was greater for LG and LGIG than BH (p<.001), but no difference was found between LG and LGIG. Skin hydration showed greater values on the thenar and dorsum compared to the palm for both LG and LGIG (p<.05). Skin hydration on the thenar increased during the typing for LG and LGIG, but on the dorsum, palm and finger maintained after 40 min typing. There were positive relationships between hand skin hydration and hand temperature (p<.05). Subjects indicated 'much warmer' and 'more humid' for the LG and LGIG compared to the BH (p<.001), but no differences were found between LG and LGIG. In conclusion, wearing inner gloves inside latex gloves did not induce a reduction of skin hydration and hand temperature; however, significant differences were found in all measurements between bare hands and gloved hands.

• Journal of Environmental Health Sciences
• /
• v.37 no.4
• /
• pp.298-305
• /
• 2011

Objectives: There has been a great amount of controversy in the food industry over the effectiveness of using gloves. The objectives of this study were to examine the microbial contamination of food handlers' hands and determine if using gloves could ensure safe handling of foods. Methods: Samples were collected through the glove-juice method from the bare and gloved hands of food handlers at work and were analyzed for the presence of aerobic plate counts, total coliform, fecal coliform, Escherichiacoli, Staphylococcus aureus, and Salmonella spp. Microbiological testing was conducted according to the Food Code of Korea. Results: Microbial contamination was consistently higher with bare hands than with gloved hands, although the microbial loads on both hands increased over time. Under certain conditions, there were significant differences between the bacterial loads on bare and on gloved hands (p<0.05). E. coli, S. aureus, and Salmonella spp. were still alive on both bare and gloved hands at the time the food handlers finished their work. Conclusions: Wearing gloves was associated with a marked reduction of bacterial contamination of the hands. However, the practice of continuously wearing gloves during food handling increases the potential for cross-contamination of bacteria. The findings of this study emphasize the need for a rational use of gloves, and strict adherence to hand hygiene compliance among food handlers.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.3
• /
• pp.11-21
• /
• 2022

PURPOSE: This study examined the changes in the handgrip strength, dexterity, and hand function according to the presence or absence of gloves and types of gloves. METHODS: Seventy-six adults in their twenties (male: 24, female: 52, mean age 21.04 years) were the subjects of this study. The handgrip strength, dexterity, and hand function were evaluated with bare hands without gloves, poly gloves, and latex gloves. The handgrip strength was measured using a dynamometer, and three pinch strength tests were performed: tip pinch, lateral pinch, and three-jaw pinch. The hand dexterity was evaluated using the Minnesota manual dexterity test, and the hand function was evaluated using the Jabson-Taylor hand function test. RESULTS: There was no difference in the grip strength depending on whether the gloves were worn. The hand grip, dexterity, and hand function showed significant differences according to the type of glove. Regarding the handgrip, dexterity, and hand function, the latex glove had the best function, and the poly glove had the lowest function. CONCLUSION: There was a difference in dexterity among the hand functions but no difference in grip strength according to the type of glove. The results suggest that the use of latex gloves in daily life be recommended.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.4
• /
• pp.15-21
• /
• 2005

Use of a glove made of materials with a low elasticity decreases the performance of the hand such as agility, dexterity, range of motion, and grip strength. The present study examined if the adverse effects of a low-elastic glove can be reduced by a design which accommodates the changes of hand surface lengths by hand motion. Two glove designs which provide patches of elastic cloth and pleats at the finger joints and knuckle were developed by considering the hand surface length changes, and then compared with two conditions(bare hand and conventional glove design that does not consider the dynamic characteristics of the hand dimensions) in terms of completion time in peg board insertion task, maximum grip strength, discomfort in hand motion, discomfort in force exertion, and overall discomfort by 24 right-handed participants. The test results confirmed that wearing of a glove significantly reduced the agility and grip strength capability of the hand and indicated that the novel designs were effective to lessen the performance decreases compared to the conventional design. Also, of the glove designs, the pleat glove design was found most preferred for both better hand performance and less subjective discomfort.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.618-632
• /
• 2010

This paper presents a novel approach to control the augmented reality (AR) objects robustly in a marker-less AR system by fingertip tracking and hand pattern recognition. It is known that one of the promising ways to develop a marker-less AR system is using human's body such as hand or face for replacing traditional fiducial markers. This paper introduces a real-time method to manipulate the overlaid virtual objects dynamically in a marker-less AR system using both hands with a single camera. The left bare hand is considered as a virtual marker in the marker-less AR system and the right hand is used as a hand mouse. To build the marker-less system, we utilize a skin-color model for hand shape detection and curvature-based fingertip detection from an input video image. Using the detected fingertips the camera pose are estimated to overlay virtual objects on the hand coordinate system. In order to manipulate the virtual objects rendered on the marker-less AR system dynamically, a vision-based hand control interface, which exploits the fingertip tracking for the movement of the objects and pattern matching for the hand command initiation, is developed. From the experiments, we can prove that the proposed and developed system can control the objects dynamically in a convenient fashion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.148.2-148.2
• /
• 2013

We prepared hydrophobic PDMS-coated porous silica as pre-concentration adsorbent for chemical warfare agents (CWAs). Since CWAs can be harmful to human even with a small amount, detecting low-concentration CWAs has been attracting attention in defense development. Porous silica is one of the promising candidates for CWAs pre-concentration adsorbent since it is thermally stable and its surface area is sufficiently high. A drawback of silica is that adsorption of CWAs can be significantly reduced due to competitive adsorption with water molecule in air since silica is quite hydrophilic. In order to solve this problem, hydrophobic polydimethylsiloxane (PDMS) thin film was deposited on silica. Adsorption and desorption of chemical warfare agent (CWA) simulants (Dimethylmethylphosphonate, DMMP and Dipropylene Glycol Methyl Ether, DPGEM) on bare and PDMS-coated silica were studied using temperature programed desorption (TPD) with and without co-exposing of water vapor. Without exposure of water vapor, desorbed amount of DMMP from PDMS-coated silica was twice larger than that from bare silica. When the samples were exposed to DMMP and water vapor at the same time, no DMMP was desorbed from bare silica due to competitive adsorption with water. On the other hand, desorbed DMMP was detected from PDMS-coated silica with reduced amount compared to that from the sample without water vapor exposure. Adsorption and desorption of DPGME with and without water vapor exposing was also investigated. In case of bare silica, all the adsorbed DPGME was decomposed during the heating process whereas molecular DPGME was observed on PDMS-coated silica. In summary, we showed that hydrophobic PDMS-coating can enhance the adsorption selectivity toward DMMP under humid condition and PDMS-coating also can have positive effect on molecular desorption of DPGME. Therefore we propose PDMS-coated silica could be an adequate adsorbent for CWAs pre-concentration under practical condition.