• Honam Mathematical Journal
• /
• v.36 no.4
• /
• pp.805-812
• /
• 2014

For unit tangent sphere bundles $T_1M$ with the standard contact metric structure (${\eta},\bar{g},{\phi},{\xi}$), we have two fundamental operators that is, $h=\frac{1}{2}{\pounds}_{\xi}{\phi}$ and ${\ell}=\bar{R}({\cdot},{\xi}){\xi}$, where ${\pounds}_{\xi}$ denotes Lie differentiation for the Reeb vector field ${\xi}$ and $\bar{R}$ denotes the Riemmannian curvature tensor of $T_1M$. In this paper, we study the Reeb ow invariancy of the corresponding (0, 2)-tensor fields H and L of h and ${\ell}$, respectively.

• East Asian mathematical journal
• /
• v.33 no.5
• /
• pp.533-542
• /
• 2017

We study the geometry of indefinite trans-Sasakian manifold ${\bar{M}}$ admitting a half lightlike submanifold M such that the structure vector field of ${\bar{M}}$ belongs to the transversal vector bundle of M. We prove several classification theorems of such an indefinite trans-Sasakian manifold.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.199-205
• /
• 2001

This paper describes the design methodology, manufacturing process, rebar tensile and bending properties. Braidtrusion is a direct Composite fabrication technique utilizing an in-line braiding and pultrusion process. The produced Composite rebar exhibits ductile stress-strain behavior similar to that of conventional steel bar. Various rebar diameters ranging from modeling scale(3m) to full-scale prototype of 9.5mm have been produced Glass Fiber Reinforced Plastics(GFRP) rebar were successfully fabricated at $\phi$8.5mm and $\phi$9.5mm nominal diameters of soild and hollow type using a braidtrusion process. Tensile and bending specimens were tested and compared with behavior of stress-strain of GFRP rebar and steel bar.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.272-277
• /
• 2011

The effect of the M-window color mixing bar on the characteristics of color mixing and hot spots in the edge-lit backlight employing red (R), green (G), blue (G) light emitting diodes (LED) were studied in terms of the structure of the M-window color mixing bar. The rays from RGB LEDs entering the M-window bar were mixed by internal reflection and scattering inside the M-window bar so that the hot spots and color separation were minimized. The M-window bar was designed and fabricated and the simulation results are matched quite well to experimental data.

• Journal of architectural history
• /
• v.17 no.1
• /
• pp.65-84
• /
• 2008

It is generally known that the temple structure in Korea was formalized by the ceremonial principle based on the Buddhist cosmology. But, there have been no concrete studies on how far the two have relationship with each other and what significance it implies in it. In other words, even though the temple structure reflects the Sumeru Mount cosmology which is the Buddhist cosmology, there is still uncertain aspects in the relationship between them. This research is a more concrete approach on what kind of corelation the Sumeru Mount cosmology has with the Korean temple structure. For this, the levels of related documents on the Buddhist cosmology and the Sumeru Mount cosmology have been arranged first. Then, on this basis, it is searched with what symbolism the cosmology has been accepted in the temple structure. The temple is a sacred space that holds Buddha and a profane space which the sattva (ordinary people) can approach at the same time. The site of the temple is also a land that is connected to the residence of sattva and a blissful area of prayer that they can be born again through Buddha at the same time. Thus, the double characteristics of sanctity and profanity are finally inter-connected with each other in the view point of Jinsokburi(Truth and Worldliness are not different), and the temple structure reflects this significance through the symbolism very well. Therefore, the correct recognition on the temple structure can be said as an important aspect to understand the purpose of Buddhism.

• Journal of The Korean Association For Science Education
• /
• v.10 no.1
• /
• pp.9-16
• /
• 1990

This study investigated the effects of variations in the kinetic structure on science knowledge acquisition. According to the rationale of the kinetic structure theory, a communication having high structrue would facilitate greater knowledge acquisition than a presentation with low structure. To testify that hypothesis, a modified non-equivalent pretest posttest control group design was used. Four 10th grade classes (2 classes for each sex) were selected. On the topic of human digestive system, two tape recorded lessons differing in kinetic structure were developed. On n of two was high structure ($\bar{B}_{1}$=0.56), and the other was low structrue ($\bar{B}_{1}$=0.99) Results indicated that the high structure lesson did not show significantly higher score than the low structrue lesson(F=2.225, P<0.137). But when the data were analyzed by sex, only boy students showed the result that the high structure lesson had significantly higher score than the low structure lesson (F=4.785, P<0.009). The results of this study suggest that a high Structure communication will facilitate the science achievement in the case of boy students.

• Molecules and Cells
• /
• v.37 no.10
• /
• pp.753-758
• /
• 2014

Sorting nexin 9 (SNX9) is a member of the sorting nexin family of proteins and plays a critical role in clathrinmediated endocytosis. It has a Bin-Amphiphysin-Rvs (BAR) domain which can form a crescent-shaped homodimer structure that induces deformation of the plasma membrane. While other BAR-domain containing proteins such as amphiphysin and endophilin have an amphiphatic helix in front of the BAR domain which plays a critical role in membrane penetration, SNX9 does not. Thus, whether and how SNX9 BAR domain could induce the deformation of the plasma membrane is not clear. The present study identified the internal putative amphiphatic stretch in the $1^{st}$ ${\alpha}$-helix of the SNX9 BAR domain and proved that together with the N-terminal helix ($H_0$) region, this internal putative amphiphatic stretch is critical for inducing membrane tubulation. Therefore, our study shows that SNX9 uses a unique mechanism to induce the tubulation of the plasma membrane which mediates proper membrane deformation during clathrinmediated endocytosis.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.4
• /
• pp.13-18
• /
• 2007

The research was performed to review the design factors which affect the durability of structures. For the study, domestic and foreign literature review were performed on various design criteria. Based on Korean standard specifications, the results showed that the durability of structure as the diameter of reinforcing steel bar becomes smaller and the distance between reinforcing bar is closer than the normal gap. The results were also presented that the minimum required bar cover is 6.6cm to obtain the durability index value. In addition, the maximum limited bar cover was 12cm considering the durability index and the change of increasing value of durability index. In case that there is no specified regulation for the bar cover thickness change, the durability life by neutralization is proportional to the thickness of bar cover.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.196-199
• /
• 2008

The piercing is increasing in western culture, and has also become gradually popular among Korean teenagers recently However, the accident hap-pens sometimes such as loss of a bar into the tongue or mouth floor during the procedure. Because of the rare cases, few treatment of choices can be made when a bar is lost inside the mouth floor. In this case, the bar was removed under fluoroscope, without giving significant damage to the adjacent structure. 18 years old female patient visited the emergency room in our hospital. She attempted to pierce her tongue herself and could not find the bar which was lost in the mouth floor. The radiographs revealed that the needle was somewhere inside the mouth floor, but if incision were to be made it would be too deep to find the bar. The bar was removed through fluoroscope easily. Primary closure was done by 5-0 Vicryl and stitch-off was done 1 week later. The patient didn't have any speech problems and complications.

• Transactions of Materials Processing
• /
• v.19 no.7
• /
• pp.411-415
• /
• 2010

A sandwich panel which is comprised of truss cores faced with solid face sheets is lightweight and multi-functional. So it is widely used to not only structural material but also heat transfer media in transportation field such as airplane, train and vessel. There are various core topologies such as pyramidal and tetrahedral truss, square honeycombs and kagome truss. The study focused on analytical approach to optimize compression and shear quality of the unit cell of PCM with pyramidal configuration. With various unit cell models which have the same core weight per unit area but different truss member angle, analytical solution for effective stress ($\bar{\sigma},\bar{\tau}$), peak stress ($\bar{\sigma}_{peak},\bar{\tau}_{peak}$) by yielding and buckling, relative density ($\bar{\rho}_c$) and effective stiffness ($\bar{E},\bar{G}$) have been computed and compared each other. With this approach, the most optimal core configuration was predicted. The result has become the efficient guidelines for the design of PCM core structure.