• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.21-37
• /
• 1993

In order to investigate the correlation of sedimentary rock properties. specific gravity, porosity, water content, sonic wave velodty, and point4oad strength index of core samples of limestones, sandstones and shales were measured. The relationships between density and velocity show $V_p=16300d-38719.3,{\;}V_s1896.4d-29225.1$ of regression equation for sandstones and $Vp=4085d-10264.8,{\;}V_s=3519d-7841.3$ for shales and <$Vp=4085d^2-20747d+303,{\;}V_s=3899d^2-21442d+318$ for limestones. Seismic wave velocity of shales which have high density is lower than that of sandstones, and this seems to be an effect of bedding in shale. P-wave velocity and S-wave velocity of limestones, sandstones and shales show the linear relationships as a whole. The regression equations are respectively calculated V_s=0.26V_p+1041.6m/sec,{\;}V_s=0.43V_p+424.2m/sec,{\;}and{\;}Vs=0.51V_p+261.9m/sec$ and the correlation coefficients of the velocity show r= 0.86 in sandstones, r= 0.75 in limestones and r=0.86 in shales. According to the point4oad strength test for limestones, point4ord strength anisotropy was not so dear even though the specimens show generally the banded structure. Variations of dip angle of bedding whihin the range $30^{\circ}-60^{\circ}$ does not have much influence upon the diametral strength index and axial strength index. From the result of point load test, P-wave velocity increases with point4ord strength index but the regression equations are $V_p=98.5lI{s_d}+4082.1m/sec,{\;}V_p=106.41{s_a}+3954m/sec$ and their correlation coefficient is low.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2013

The Taebaegsan region and its vicinities mainly consist of Precambrian granitic gneisses and Cambrian meta-sedimentary rocks. And lots of leucocratic(alkali) granites smaller than the stocks are found here and there. Therefore the presence of leuco-granites is not properly described yet in the former studies. For the effective distinction of several granitic rocks, outcrop characteristics, mineral identification, and petro-chemical properties were studied. Some part of granitc gneisses could be classified into typical metamorphic rocks such as migmatites and banded gneisses. And some shows rather dark appearance with gray quartz and feldspars, and others two mica granites, leucocratic ones etc. But all of leucocratic granites of the region usually show bright milky white to beige color. Since they mainly consist of quartz, feldspars, muscovite, and small amounts of sericites, amphiboles, tourmaline and lepidolite. And all of alkali granites belong to the calc-alkalic, peraluminous and S-type in character. During magmatic differentiation of leucocratic granites, CaO and total Fe contents are clearly decreased than those of the older granitic rocks. On the other hand, magmatic evolution also had induced the greisenization and albitization which enriched the relative amounts of alkali elements such as $K_2O$ and $Na_2O$.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.1
• /
• pp.40-50
• /
• 2000

This study is aimed at elucidating the source rocks of the Hayang strata in the northeastern part of the Gyeongsang Basin. Zircon morphology was analyzed for sandstones from the Iljig, Hupyeongdong, and Jeomgog formations of the Hayang Group and Precambrian gneisses and Jurassic granites. Generally, the composite zircon crystals extracted from the basement rocks and the Hayang Group sandstones show short prismatic to middle prismatic shapes. {110)={100) prism type is dominant and (101) pyramid is the average of the zircon morphology data. Zircon index@) and the shape trend characteristics clearly show that the zircon crystal forms of the Iljig and Hupyeongdong sandstones are dominantly similar to those of the biotite banded gneiss and granite gneiss of Precambrian age. Zircon morphology of the Jeomgog sandstones is dominantly similar to those of the Jurassic granites. Referring to the reported paleocurrent result, the source rocks of the Iljig and Hupyeongdong formations are mainly the Precambrian gneisses distributed in the southeastern and northeastern parts, respectively. And Jeomgog sandstones were mainly derived from Cheongsong granite at Cheongsong uplift region in the eastern part. At the time of completion of the Hupyeongdong sedimentation, the Precambrian basement rocks were severely eroded and formed low topography. During the Jeomgog period, the Jurassic granites which intruded the Precambrian basement began to crop out on the surface. The basin widely extended toward the east and the exposed Jurassic granite of Cheongsong uplift region actively supplied the sediments to the basin.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.3
• /
• pp.171-182
• /
• 1999

The Myeonbongsan caldera, 10.2X8.0 km, developed within older sequences of sedimentary formations and intermediate composition volcanis in the southern Cheongsong area. Volcanic rocks in the caldera block include lower intermediate volcanics, middle tuffaceous sequences and upper silicic ones. The silicic volcanics, which is named Myeonbongsan Tuff, are composed of crystal-rich ash-flow tuff(300 m) , bedded tuff(30 m) and pumice-rich ash-flow tuff(700 m) in ascending order. Several intrusions dominate the early sequences within the caldera. The caldera collapsed in a trapdoor type when silicic ash-flow tuffs erupted fro major vent area in the caldera. Normal faulting along a ring fault system except the southwestern part dropped the tuffs down to the northrase with a maximum displacement of about 820 m. The Myeonbongsan Tuff is just about 1,030 m thick inside the northeastern caldera, with its base not exposed, and southwestward thinning down. Rhyolitic plug and ring dikes are emplaced along the central vent and the caldera margins, and the ring dikes are cut by plutonic stocks in the southeastern and northwestern parts. The caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which silicic magma was erupted to form the Myeonbongsan Tuff. Following the last ash-flow eruption, collapse of the chamber roof resulted in the formation of the Myeonbongsan caldera, a subcircular trapdoor-type depression subsiding about 820 m deep. After the collapse, stony to flow-banded rhyolites were emplaced as circular plugs and ring dikes along the central vent and the caldera margins respectively. Finally after the intrusions, another plutons were emplaced as stocks outside the caldera.

• Journal of Distribution Science
• /
• v.6 no.1
• /
• pp.47-62
• /
• 2008

Joining the WTO in 2001, China became a number of the global economic system. China succeeded in vying to host Beijing 2008 Olympic Games and World Expo 2010 Shanghai. It is China's honor and opportunity to have high economic growth in the coming future. In 2007, the total cost of public logistics decreased by 18.2% than 2006 to 4540.6 billion RMB, accounting for 18.4% of the GDP. So, China logistics is a huge industry and a growing market full of charm. The statistic ratios of China's logistics and growth trends show us it is an important issue to build and run an effective logistics system. However, research on China's logistics systems and supply chain is lacked. This study is focus on the logistic location strategy in China including the study of factories and warehouses geographic strategy concerned with SCM. The core of this study is to propose a New Multi-Facilities Location Decision Model. This study banded the revised gravity center, the standard single facility location decision model(Gravity Center Model) and the transportation model into a new Multi-Facilities Location Decision Model. In addition, this study suggested the gravity center of population, the gravity center of each industry, the location decision graded-list of each industry of china using the gravity center model and the revised gravity center model. The new Multi-Facilities Location Decision Model proposed in this study can be used to solve the location decision problem of more than two facilities. And it can be used in the fields such as the location decision of production facility and service facility, the location of distribution and logistics, the location of broadcast and satellite communications, the location of wireless communication tower and so on.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.588-597
• /
• 2015

This study was carried out to identify the reasons of the landslide by land creeping in South Korea in order to provide basic information for establishing the management plan for prevention. Total 29 sites of landslide areas caused by land creeping were observed in South Korea. Among them, the soil-composition of most frequent landslide areas occurred by land creeping was colluvium landslide as 75.9% (22 sites), followed by clay soil landslide as 10.3% (3 sites), bedrock landslide as 6.9% (2 sites), and weathered rock landslide as 6.9% (2 sites). According to the types of parental rocks, the investigated landslide areas were divided into 3 types: 1) metamorphic rocks including schist, phylite, migmatitic gneiss, quartz schist, pophyroblastic gneiss, leucocratic granite, mica schst, banded gneiss and granitic gneiss, 2) sedimentary rocks including limestone, sandstone or shale and mudstone, 3) igneous rocks such as granite, andesite, rhyolite and masanite. As a result, it was noticed that the landslides occurred mostly at the metamorphic rocks areas (13 sites; 44.8%), followed by sedimentary rock areas (12 sites; 41.4%), and igneous rock areas (4 sites; 13.8%). Looking at the direct causes of the landslide, the anthropological activities (71%) such as cut slopes for quarrying, construction of country house, plant, and road, farming of mountain top, and reservoir construction were the biggest causes of the landslides, followed by the land creeping landslides (22%) caused by geological or naturally occurred (22%), and cliff erosions (7%) by caving of rivers and valleys.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.325-331
• /
• 2010

Attractiveness of stink bugs to various colors, heights and locations of fish-net traps incorporated with aggregation pheromones was determined. Bean bug, Riptortus pedestris Fabricius, was most attracted to yellow color trap, followed by white, black, green, blue and brown. R. pedestris and one-banded stink bug, Piezodorus hybneri Gmelin, were most attracted to fish-net traps placed 80 cm above the ground regardless of sexes of two species of stink bugs. Between the sexes, however, R. pedestris females were more attracted to 40 and 80 cm above the ground than the males at those heights although the attraction was not significantly different at 120 and 160 cm heights. P. hybneri females tended to be attracted to 40 and 80 cm height traps but the attraction was the opposite at 120 and 160 cm heights. The highest attraction of R. pedestris was observed in a perilla field with no significant difference in the soybean field and border area in which no crop were cultivated between the perilla and soybean fields. R. pedestris was also more attracted to the sweet persimmon orchard than the soybean and medicinal crops fields, which was a significant difference between the two fields.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.191-201
• /
• 2002

The Gubong gold-silver deposits if gold-silver-bearing hydrothermal massive quartz veins which were filled the fractures along fault shear (NE, NW) zones within Precambrian banded or granitic gneiss of Gyeonggi massif. Ore mineralization of this deposits is contained within a single stage of quartz vein which was formed by multiple episodes of fracturing and healing. Ore minerals are comported mainly of arsenopyrite, pyrite, sphalerite, chalcopyrite, galena with minor amounts of pyrrhotite, marcasite and electrum. The frequency and volume percentages of electrum associated with ore minerals from this deposits are recognized as follows; 44.5% and 54.3% with arsenopyrite, 24.3% and 33.8% with quartz, 12.6% and 0.1% with pyrite, 11.0% and 4.8% with galena, 5.0% and 7.0% with sphalerite and 2.5% and 0.02% with chalcopyrite, respectively. They show irregular (41.6%), subround (34.7%), elongate (17.0%) and granular (6.6%) shapes, respectively. Their grain size ranges from 2 to 150 um, but 90.9 percent of the grains are below 30 um. The chemical composition of electrums ranges from 26.39 to 72.51 Au atomic %. These composition (Au atomic %) on the basis of associated minerals are from 44.97 to 71.75 with arsenopyrite, pyrite, sphalerite and quartz, from 44.37 to 72.51 with quartz, from 35.40 to 41.01 with sphalerite and chalcopyrite, from 26.39 to 54.84 with pyrite, chalcopyrite, quartz and galena, from 28.49 to 53.28 with galena, respectively. We suggest that optimum recovery of gold would be obtained with reference to these results.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.881-889
• /
• 2018

The Geodo skarn deposit is located in the Taebaeksan Basin, central eastern Korean Peninsula. The geology of the deposit consists of Cambrian to Ordovician calcareous sedimentary rocks and the Cretaceous Eopyeong granitoids. The skarns at Geodo occur around the Eopyeong granitoids, which consist, from early to late, of magnetite-bearing equigranular quartz monzodiorite, granodiorite, and dykes. These dykes emanated randomly from equigranular granodiorite and some of dykes spatially accompany skarns. Skarn Fe mineralization, referred as Prospect I and II in this study, is newly discovered beyond previously known skarns adjacent to the quartz monzodiorite. These discoveries show a vertical and lateral variation of skarn facies, grading from massive reddish-brown garnet-quartz in a lower and proximal zone to banded in an upper and distal zone, reflecting changes in lithofacies of the host rocks. Skarn veins in distal locations are parallel to sedimentary laminae, suggesting that lithologic control is important although proximal skarn has totally obliterated primary structures, due to intense retrograde alteration. Skarns at Geodo are systematically zoned relative to the causative dykes. Skarn zonation comprises proximal garnet, distal pyroxene, and vesuvianite (only in Prospect I) at the contact between skarn and marble. Retrograde alteration is intensely developed adjacent to the contact with dykes and occurs as modification of the pre-existing assemblages and progressive destruction such as brecciation of the prograde assemblages. The retrograde alteration assemblages consist predominantly of epidote, K-feldspar, amphibole, chlorite, and calcite. Most of the magnetite (the main ore mineral), replaces calc-silicate minerals such as garnet in the lower proximal exoskarn, whereas it occurs massive in distal pyroxene and amphibole in the upper and distal exoskarn. The emanation of dykes from the equigranular granodiorite has provided channelways for ascent of skarn-forming fluids from a deep source, whereas the style and nature of skarns suggest that originally structurally-controlled skarn-forming fluids may migrate long distances laterally to produce skarn in calcareous sedimentary rocks.

• The Korean Journal of Malacology
• /
• v.26 no.3
• /
• pp.235-244
• /
• 2010

Ultrastructural characteristics of the testis and spermatogenesis of Crassostrea gigas were investigated by Transmission and Scanning Electron microscope observations. The testis is a diffuse organ consisting of branching acini containing differentiating germ cells in a variety of stages. The acinus is surrounded by an intermitent layer of myoepithelial cells andis divided into subcompartments that are partially separated by pleomorphic accessory cells which remain in close contact with germ cells until late stages of development. these accessory cells contain a large quantity of glycogen particles and lipid droplets in the cytoplasm. Therefore, it is assumed that they are involved in the supplying of the nutrients for germ cell development, while any phenomena associated with phagocytosis of undischarged, residual sperms by lysosomes could be find in the cytoplasm of the accessory cells. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves. Mature spermatozoa consist of broad, cap-shaped acrosomal vesicle, subacrosomal material (containing axial rod embedded in a granular matrix), a oval nucleus showing deeply invaginated anteriorly, two triplet substructure centrioles surrounded by four spherical mitochondria, and satelite fibres appear to the distal centriole and plasma membrane. Spermatozoa of C. gigas resemble to those of other investigated ostreids. In particular, the anterior region of the acrosomal vesicle is transversely banded. It is assumed that differences in this acrosomal substructure are associated with the inability of fertilization between the genus Crassostrea and other genus species in Ostreidae. Therefore, we can use sperm morphology in the resolution of taxonomic relationships within the Ostreidea. The spermatozoon is approximately $42-47{\mu}m$ in length including an oval sperm nucleus (about $0.91{\mu}m$ in length), an acrosome (about $0.42{\mu}m$ in length) and tail flagellum ($40-45{\mu}m$). The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9 + 2 structure. These morphological charateristics of acrosomal vesicle belong to the family Ostreidae in the subclass Pteriomorphia.