• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1297-1303
• /
• 2013

자동차 조향장치의 볼 조인트의 더스트 커버의 밀봉성과 응력 평가를 위하여 비선형 요한요소해석을 수행하였다. 주름형상과 항아리형상의 두 종류의 더스트 커버에 대하여 조립상태와 작동상태에 대하여 해석을 수행하여, 최대응력과 리브에서의 접촉응력 결과를 평가하고 비교하였다. 또한 작동상태에서의 몸통부 응력과 리브의 접촉응력이 조립상태 대비 증가하는 정도를 평가하였다. 해석 결과로부터 두 종류 모두 밀봉성이 우수한 것으로 확인되었으나, 상대적으로 최대응력이 작은 주름형상이 항아리형상보다 더 우수한 것으로 나타났다.

• 한국CDE학회논문집
• /
• 제10권5호
• /
• pp.375-379
• /
• 2005

Durability of rubber dust cover in the ball joint for automotive suspension parts is analyzed by FEM and compared with experimental data. Upper open area of ball joint is sealed by dust cover for preventing outflow of the lubricating oil and intrusion of send, dust, water, etc. This rubber cover undergoes repeated loadings such as tension and compression while the car is running. Analysis about rubber material needs to consider every kinds of nonlinearities arise in finite element analysis, which are geometric nonlinearity due to large displacement and small strain, materially nonlinearity and nonlinear boundary condition such as contact. The deformation behavior of dust cover is analysed by using the commercial finite element program MARC. In the study, this program could solve these kinds of nonlinear analysis accurately. Finite element model of dust cover is considered as 3-dimensional half model based on 2-dimensional axisymmetric model. Material property of rubber is modeled by Ogden model and input data for calculation takes form uniaxial tension test of rubber specimen. The final object of the study is obtaining the design specification of dust covers and the result of analysis should be a useful data to design of rubber cover.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1231-1232
• /
• 2013

• 동력기계공학회지
• /
• 제22권6호
• /
• pp.44-50
• /
• 2018

As a type of bolt with a spherical head, the ball stud is widely used as a part of a ball joint in steering or suspension systems in automobiles. Balls and studs are subjected to heat treatment suitable for each material; in particular, the shear strength of the ball stud must meet the specifications of the production company. This study evaluated the shear strength of joints according to the cooling method of ball studs subject to resistance welding. The shear stress of water cooling was higher than that of air cooling (as-received material). Note, however, th at oil cooling showed lower stress than that of as-received. When judged by standard deviation, mean, and coefficient of variation according to the arithmetic statistics and shape parameter as well as scale parameter, oil cooling is suitable.

• Advances in robotics research
• /
• 제2권2호
• /
• pp.113-127
• /
• 2018

Robotics and automation are rapidly growing in the industries replacing human labor. The idea of robots replacing humans is positively influencing the business thereby increasing its scope of research. This paper discusses the development of an experimental platform controlled by a robotic arm through Robot Operating System (ROS). ROS is an open source platform over an existing operating system providing various types of robots with advanced capabilities from an operating system to low-level control. We aim in this work to control a 7-DOF manipulator arm (Robai Cyton Gamma 300) equipped with an external vision camera system through ROS and demonstrate the task of balancing a ball on a plate-type end effector. In order to perform feedback control of the balancing task, the ball is designed to be tracked using a camera (Sony PlayStation Eye) through a tracking algorithm written in C++ using OpenCV libraries. The joint actuators of the robot are servo motors (Dynamixel) and these motors are directly controlled through a low-level control algorithm. To simplify the control, the system is modeled such that the plate has two-axis linearized motion. The developed system along with the proposed approaches could be used for more complicated tasks requiring more number of joint control as well as for a testbed for students to learn ROS with control theories in robotics.

• 한국산업융합학회 논문집
• /
• 제15권1호
• /
• pp.5-11
• /
• 2012

The Buckling of the member under compressive stress is likely to occur, which is an important factor determining the strength of structures. The objective of this study was to evaluate the member buckling strength of a circular hollow steel with ball joints and to compare with design specifications for load resistance factor of our country. Furthermore, we would like to suggest basic data for evaluation of buckling length of a circular hollow steel with ball joints according to comparative analysis. These results were summarized as follows: Buckling stress according to the test results on buckling was 1.21 times greater than LSD specifications of our country estimated the entire length of circular hollow steel with ball joints as buckling length. In addition, it was 1.16 times greater than when estimating the length except the ball as buckling length and 1.14 times grater than when excluding the ball and sleeve. Therefore, when estimating buckling stress of circular hollow steel with ball joints, their buckling length may be measured by the length except ball and sleeve.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.323-326
• /
• 1997

Conventional robots actuated by motors with the speed reducer such as harmonic drive had weakness in delivering loads, pressing, grinding, and cutting jobs. To overcome this, the developer a new type of robot actuated by the ball screw. The robot is an articulated shape, which is composed of four axes. The base axis is actuated similarly with conventional robot, but the others are actuated by four bars mechanism composed of the ball screw. We setup the dynamics model of the robot. The robot has parameter uncertainties and nonlinearlity due to the ball screw actuator. To coordinate the robot, we applied sliding-mode control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.801-802
• /
• 2011

• 디지털융복합연구
• /
• 제13권7호
• /
• pp.373-380
• /
• 2015

본 연구는 테니스 한손과 양손 백핸드 스트로크 동작에서 하지관절 움직임의 차이를 확인하여 유형별 특성을 밝히는데 그 목적이 있으며 그 결과는 다음과 같다. 볼의 속도를 결정하는 중요한 요인인 라켓헤드의 합성 속도는 양손 백핸드 스트로크 동작이 한손보다 빠른 속도를 나타냈다. 양손 백핸드 스트로크는 하체의 움직임을 최소화시키고 몸통 회전을 통한 스트로크를 하는 반면 한손 백핸드 스트로크는 몸통을 이용한 스트로크를 하기 보다는 공을 쫓아가듯이 스트로크 하는 것으로 나타났다. 슬관절의 신전모멘트는 한손 백핸드 스트로크가 큰 것으로 나타났지만, 내번모멘트와 회내모멘트 그리고 굴곡모멘트는 양손 스트로크에서 크게 나타났다. 고관절의 경우 신전, 내번, 회내 모멘트가 양손 백핸드 스트로크가 한손 보다 모두 큰 것으로 나타났는데 특히 내번모멘트의 경우 큰 차이를 나타난 반면, 외번모멘트는 한손 백핸드 스트로크가 큰 것으로 나타났다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.265-270
• /
• 2001

Hip joint simulator which Is an essential device for evaluating the wear of biomaterials (ultrahigh molecular weight polyethylene, Co-Cr alloy, alumina, etc.) used in total hip joint replacement was developed. This hip joint simulator mimics the joint motion and joint loading of human gait by adapting the 4 degree of freedom in kinematic motion (flexing/extension, adduction/abduction, Internal rotation/external rotation) and axial loading, Four stations are operated by 8 servo-motors and harmony drives. Joint leading was imposed by displacement control from a ball screw, LM guide, and spring system. Each kinematic link system operates separately or coupled modes. A heater and a thermocouple were installed for keeping the body temperature in each station.