• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.166-173
• /
• 2013

As the number of IPs and the communication volume among them have constantly increased, on-chip crossbar network is now the most widely-used on-chip communication backbone of contemporary SoCs. The on-chip crossbar network consists of multiple crossbars and the connections among the IPs and the crossbars. As the complexity of SoCs increases, it has also become more and more complex to determine the topology of the crossbar network. To tackle this problem, this paper proposes an on-chip crossbar network topology method for application-specific systems. The proposed method uses mixed integer linear programming to solve the topology synthesis problem, thus the global optimality is guaranteed. Unlike the previous MILP-based methods which represent the topology with adjacency matrixes of IPs and crossbar switches, the proposed method uses the communication edges among IPs as the basic element of the representation. The experimental results show that the proposed MILP formulation outperforms the previous one by improving the synthesis speed by 77.1 times on average, for 4 realistic benchmarks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.68-74
• /
• 2008

Ethernet is the very successful technology in private local area network. Therefore, we can obtain the advantage to reduce network overhead due to such as protocol translation when to apply Ethernet to the public backbone network. However, in order to do that, it is required to restore the network within 50msec when link failure occurs, in order to provide seamless connections to end users. Currently, ITU-T standardized the automatic protection switching (APS) based Ethernet protection switching system. In this paper, we propose the improved Ethernet protection switching system to minimize the number of Ethernet frames lost when the network is restored from the failure. The proposed mechanism is analyzed by using simulation based on ns-2 and numerical results show that the proposed one provides superior performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.777-785
• /
• 2009

In recent wireless sensor networks, stationary nodes and mobile nodes co-exist to provide a diverse service. However, because there are multiple mobile nodes located in the wireless sensor network, there is a potential for the instability due to the frequent network reconfiguration and the traffic caused by densely concentration of mobile nodes while mobile nodes are switching locations. In order to solve this problem, we propose the pumping node architecture to solve this traffic congestion problem due to the crowds of mobile nodes. The pumping node can be reduced heavy traffic by pumping through the backbone network caused by the densely concentration of the mobile nodes. As a result, the architecture reduces the traffic in the sensor network with high reliability.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.68-74
• /
• 2006

The MANET(Mobile Ad Hoc Network) is an independent network that is oranized by only Mobile Hosts. MANET guarantees the mobility of the node and does not need a backbone network or a base station. Recently, there is a strong demand to connect MANET to the Internet. For the interconnection between MANET and Internet, Mobile hosts of MANET must have global IP address. The well known scheme of the address configuration for MANET is SAA(Stateless Address Autoconfiguration). SAA configurated IP address by node itself. The advantage of SAA is not requiring any server for address configuration. However the SAA has problems of unstable and inefficient interconnection on the AD Hoc Network. To solve this problem we propose a method that assigns an IPv6 Global address to the node through the Internet Gateway. The format of assigned IPv6 address is also defined. The simulation result demonstrates that the proposed method can support the host for fast getting of global IPv6 Address and Mobile IPv6 efficiently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.233-239
• /
• 2015

The demand of remote control and monitoring for efficiency and applications of LED streetlight is increasing continuously because the demand of LED streetlight was increase last few years. Existing street light remote control system is wired using a power line network. The wireless connection exists, but due to its low data transmission rate, it cannot support specialized applications. It can only support simple control and monitoring. In this paper, we propose a system that uses a IEEE 802.11s wireless mesh network based on WLAN, as a backbone network for remote control and monitoring of the LED street lights along with other specialized applications. Using the wireless mesh network for remote control and monitoring the LED street lights, the same can be used to act like a public Wi-Fi access point. We have designed Wi-Fi integrated LED streetlight controller and implemented our system. We evaluated the performance of our system on a real test bed. Our proposed system is expected to perform the role of a U-city infrastructure by utilizing the wireless mesh network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.778-785
• /
• 2020

Wireless mesh networks consist of mesh clients, mesh routers and mesh access points. The mesh router connects wireless network services to the mesh client, and the mesh access point connects to the backbone network using a wired link and provides Internet access to the mesh client. In this paper, a limited number of mesh routers and mesh access points are used to propose optimization algorithms for network design for wireless mesh networks. The optimization algorithm in this paper has been applied with a sub-subscription algorithm, which is one of the meta-heuristic methods, and is designed to minimize the transmission delay for the placement of mesh routers and mesh access points, and produce optimal results within a reasonable time. The proposed algorithm was evaluated in terms of transmission delay and time to perform the algorithm for the placement of mesh routers and mesh access points, and the performance evaluation results showed superior performance compared to the previous meta-heuristic methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4420-4438
• /
• 2021

Image dehazing is an ill-posed problem which is far from being solved. Traditional image dehazing methods often yield mediocre effects and possess substandard processing speed, while modern deep learning methods perform best only in certain datasets. The haze removal effect when processed by said methods is unsatisfactory, meaning the generalization performance fails to meet the requirements. Concurrently, due to the limited processing speed, most dehazing algorithms cannot be employed in the industry. To alleviate said problems, a lightweight fast dehazing network based on a multiple scale-patch framework (MSP) is proposed in the present paper. Firstly, the multi-scale structure is employed as the backbone network and the multi-patch structure as the supplementary network. Dehazing through a single network causes problems, such as loss of object details and color in some image areas, the multi-patch structure was employed for MSP as an information supplement. In the algorithm image processing module, the image is segmented up and down for processed separately. Secondly, MSP generates a clear dehazing effect and significant robustness when targeting real-world homogeneous and nonhomogeneous hazy maps and different datasets. Compared with existing dehazing methods, MSP demonstrated a fast inference speed and the feasibility of real-time processing. The overall size and model parameters of the entire dehazing model are 20.75M and 6.8M, and the processing time for the single image is 0.026s. Experiments on NTIRE 2018 and NTIRE 2020 demonstrate that MSP can achieve superior performance among the state-of-the-art methods, such as PSNR, SSIM, LPIPS, and individual subjective evaluation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.57-64
• /
• 2006

Multiprocessor system on chip (MPSoC) platforms has set a new innovative trend for the SoC design. Quality of service parameters and performance matrix are leading to the adoption of new design methodology for SoC, which will incorporate highly scalable, reusable, predictable, cost and energy efficient platform not only for underlying communication backbone but also for the entire system architecture of NOC. Like the layered architecture for the communication backbone of NOC, we have proposed the entire system architecture for NOC to be a seven layered architecture in itself. Such a platform can separate the domain specific issues which will model concurrency along with the synchronization issues more effectively. For such a layered architecture, model of computation will provide a framework to that can model concurrency and synchronization issues which are natural for any application. Therefore it becomes extremely important to use a right computation model in a specific NOC region.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.192-199
• /
• 2006

Establishment of bandwidth and effective traffic processing are required to treat various traffics according to a rapid increase in Internet traffic. A path setup algorithm was introduced to support backbone franc processing but the failure probability is increasing according to fixed operation in nodes. In other words, fixed maximum permitted time can be raised failure probability. So as to solve this problem, this paper introduces variable path setup time algorithm which support channel service of excessive traffic that is generated from not allowed channel. We proposed GLSP(Generalized Label Switch Path) setup algorithm that use variable path setup time parameters. This algorithm can improve path setup probabilities of backbone network that is composed of fixed way.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.223-234
• /
• 2008

Mobile multi-hop relaying (MMR) technology is being considered as a promising solution capable to enhance coverage, user throughput, and system capacity of the current wired backbone dependent wireless access networks. Since the relaying nodes do not need a wired backbone access, MMR technology offers easy and low-cost deployment, flexible cell planning, and adaptive traffic handling performance. In this paper, we investigate performance and cost effectiveness of the MMR technology deployment in the IEEE802.16j based WiBro/WiMAX systems. We first introduce standardization activities and research issues of MMR WiBro/ WiMAX systems. Since the coverage extension problem may occur in metropolitan areas as well as suburban or rural areas where user density is relatively low or moderate, we introduce several MMR topologies and analyze cost-effectiveness of MMR based coverage extension with respect to the user traffic density. Then, we argue cost effect on MMR technology deployment and throughput performance, Finally, we introduce further study issues including sectorized base station based MMR deployment approaches and the single and multi-frame structure MMR approaches.