• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.664-669
• /
• 2004

An upflow BAF(Biological Aerated Filter) equipped with an expanded clay media was applied to reuse weaving wastewater of water jet loom. The performance of lab-scale biofilter was investigated by the adjustment of EBCTs(Empty Bed Contact Time) and the packing ratio of media, which were changed 1.1 to 3.7hr and 38 to 63%, respectively. In most conditions except 1.1hr of EBCT, BOD, CODcr, SS and Turbidity of the effluent were 1~4mg/L, 7~16mg/L, 1~5mg/L and 5~14NTU, where their removal efficiencies were 76~95%, 82~93%, 63~94% and 59~81%, respectively. From the observation of SEM(Scanning Electron Microscope) photographs of porous clay media, it was revealed that this media provided good performance of retaining microbes effectively. In addition, $0.44~0.49kgVSS/kgBOD_{rem}$. of low sludge reduction was expected. The most efficient back washing cycle and procedure were once per 4 to 9 days and air including collapse-pulsing method, respectively. Therefore, this system can be of use as an weaving wastewater treatment for reuse.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.366-366
• /
• 2009

후면접합 태양전지는 상용 태양전지의 수평전류 손실(lateral current loss) 이 없으며, 전면전극에 의해 발생하는 그림자 손실(shading loss) 줄인 고효율 태양전지의 하나이다. 생성된 반송자가 후면에 위치한 전극에서 수집되기 때문에 효율향상을 위해서는 불순물에 의한 재결합을 줄이는 것이 중요하다. 따라서 Gettering 은 높은 소수반송자 수명(life-time)을 가지는 고품위 실리콘 기판은 고효율 실리콘태양전지 제작을 위한 중요 요소 기술이다. 본 연구에서는 n-type c-Si 기판을 이용한 고효율 실리콘 이종접합 태양전지제작을 위해 external gettering 공정을 이용하여 고품위 실리콘 기판을 제작하였다. POC13 doping process 의 온도, 시간을 변화시킴으로써 이에 따른 변화를 관찰하였다. 주사전자현미경(SEM)를 통해 etch pit 을 확인 했으며,Four point probe 를 통해 면저항을 측정, 인(P)의 농도를 계산 하였다. 계산된 면저항을 통해 인(P)의 확산 깊이를 계산하였다. Iodine passivation 된 시편을 Qusi-steady state photoconductance (QSSPC)를 이용하여 소수반송자 수명을 측정함으로써 gettering 에 의한 bulk lifetime 향상 효과를 관찰하였다.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.649-660
• /
• 2016

Purpose: The purpose of this study is to find empirical studies the causal relationship among positive defining representation, negative defining representation, surface acting, deep acting, dissatisfaction of job, and intention of job transfer. Methods: The collected data through the survey by customer satisfaction team of "A" company call center. Results: The result of this study is that emotion and behavior norm influence on deep act of expressing both positive impacts of the employees. Conclusion: Feelings of corporate representation norm is psychologically of employees that because it affects even also must facilitate the surface acts and internal acts of employees and job dissatisfaction at the same time due to emotional dissonance and emotional exhaustion and turnover are hidden on the back emotion norms in the contact department, it should be aware of the need to address the emotional problems. Companies need to develop a variety of programs with attention to addressing the emotional difficulties experienced by workers.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.12 s.105
• /
• pp.1327-1331
• /
• 2005

This Paper addresses what amount of whole-body vibration is exposed to Korean pilots of UH60 helicopters during their mission flight. To measure the expose4 whole-body vibration, the 12-axis whole-body vibration measurement system was used. It enables the direct measurement of whole-body vibration exposed from the body contact area consisting of the feet, hip and back. The measured 12-axis vibration signals were used to evaluate the vibration comfort level experienced by the pilots of UH60 helicopters. The evaluated vibration comfort level is found to be closeto 0.74-0.79m/s, which is equivalent to the semantic scale of 'fairly uncomfortable'. To assess the health effects of whole-body vibration exposed to Korean pilots of UH60 helicopters during their mission flight, the rms-based and VDV(vibration dose value)-based evaluation schemes, recommended by ISO 2631-1:1977, were exploited in this work. The evaluated results indicate that Korean pilots cannot avoid the fatigue-decreased proficiency limit after two-hour continuous flight. The whole-body vibration level exposed from the UH60 helicopters during continuous 10-hours mission flight is found to reach to the vibration exposure limit.

• Journal of the Korean Magnetics Society
• /
• v.26 no.6
• /
• pp.206-212
• /
• 2016

The shape of a iron bed supporting a permanent magnet in a large-sized motor is a important factor for determining the coupling strength with the yoke. In a large-sized motor, there is a difference in electromagnetic force with the yoke depending on the shape of the iron bed. In this paper, we show the differences and problems by calculating the electromagnetic force between the double bed and the single bed through the virtual air gap, and show that the single bed is superior in terms of the binding force. It is also shown that the binding force between the bed and the yoke is improved by carving the groove shape under the bed.

• Macromolecular Research
• /
• v.17 no.1
• /
• pp.31-36
• /
• 2009

Highly transparent, thin polythiophene (PT) films were successfully synthesized by the plasma polymerization of thiophene. These films were doped with $O_2$ plasma by in-situ doping technique. The plasma polymerized PT films were deposited at about 50 to 340 nm/min, depending on the temperature and plasma power. A resultant transparency as high as 85% was achieved. The plasma polymerized PT films exhibited the characteristics of an insulator or semiconductor ($10^{10{\sim}12}{\Omega}/{\Box}$, $10^{-7}S/cm$). The conductivity was immediately increased up to $10{\Omega}/{\Box}$ and $10^{-2}S/cm$, when doped with $O_2$ plasma. The plasma-doped PT films exhibited an increased surface roughness resulting in a decreased contact angle. However, the thickness of the PT layer was partially decomposed and/or etched with increasing voltage above 40 W.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2016

In this paper a cervical rehabilitation robot for Mckenzie exercises to be effective to neck pain relief is proposed. The robot has two degrees of freedom (DOF) for Lateral flexion and extension, Dorsal and Vental flexion which enable user to perform cervical stretching and isometric exercises for neck muscles. The mechanical parts of the cervical rehabilitation robot can be mounted on a back- or head-rest of chair, and user can perform the Mckenzie exercise with seated. In experiments we measured the range of motion of cervical part, EMG signals from neck muscles and the contact forces of a head bracket fixing the head part of user, and then evaluated their performances. From the experimental results, we showed a feasibility of the cervical rehabilitation robot proposed in this study.

• Korean Journal of Materials Research
• /
• v.24 no.3
• /
• pp.123-128
• /
• 2014

To realize high-performance thin film solar cells, we prepared CIGS by the co-evaporation technique on both sodalime and Corning glass substrates. The structural and efficient properties were investigated by varying the thickness of the Mo:Na layer, where the total thickness of the back contact was fixed at 1${\mu}m$. As a result, when the Mo:Na thickness was 300 nm on soda-lime glass, the measured Na content was 0.28 %, the surface morphology was a plate-like compact structure, and the crystallinity by XRD showed a strong peak of (112) preferential orientation together with relatively intense (220) and (204) peaks as the secondary phases influenced crystal formation. In addition, the substrates on soda-lime glass effected the lowest surface roughness of 2.76 nm and the highest carrier density and short circuit current. Through the optimization of the Mo:Na layer, a solar conversion efficiency of 11.34% was achieved. When using the Corning glass, a rather low conversion efficiency of 9.59% was obtained. To determine the effects of the concentration of sodium and in order to develop a highefficiency solar cells, a very small amount of sodium was added to the soda lime glass substrate.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.1
• /
• pp.12-15
• /
• 2008

The zinc oxide(ZnO) nanowires were deposited on Si(001) substrates by thermal chemical vapour deposition without any catalysts. SEM data suggested that the grown nanostructures were the well-aligned ZnO single crystals with preferential orientation. Back-gate ZnO nanowire field effect transistors(FET) were successfully fabricated using a photolithography process. The fabricated nanowire FET exhibits good contact between the ZnO nonowire and Au metal electrodes. Based on I-V characteristics it was found out that the ZnO nanowire revealed a characteristic of n-type field effect transistor. The drain current increases with increasing drain voltage, and the slopes of the $I_{ds}-V_{ds}$ curves are dependent on the gate voltage.

• Journal of Korean Academy of Nursing
• /
• v.29 no.1
• /
• pp.183-195
• /
• 1999

The purpose of this study is to describe the health care status of Korean Immigrants in New Zealand. The sample consisted of 155 Koreans who were randomly selected from the Korean Immigrants telephone book in Auckland, N.Z. They had health problems that required health management both physically (50.3%) and psychologically(70.3%). During the previous year, the average rate of medical contact with a general practitioner was 1$\pm$1.29 times. Korean immigrants who had health problems first attempted to resolve the problem through self medication rather than utilize health care services. They would only visit a general practitioner if they had severe subjective symptoms or no relief from self medication. Even if they think they need to visit the health care service, 41.9% of the subjects did not go back for follow-up care. Generally, the person who demonstrated positive health care behaviors was male, a college level graduate or higher, lived in N.Z. longer than 2 years, had a high score on health status by self assessment, and he placed few demands on health care services. Barriers to a healthy lifestyle are communication difficulties in expressing subjective symptoms, understanding the physician's treatment and medication plans, difficulty in accessing the appointment system and the high cost of service.