• 한국전기전자재료학회논문지
• /
• 제13권2호
• /
• pp.131-136
• /
• 2000

We have investigated the slurry induced metallic contaminations of undoped and doped silicate oxides surface on CMP cleaning process. The metallic contaminations by CMP slurry were evaluated in four different oxide films, such as plasma enhanced tetra-ethyl-orthyo-silicate glass(PE-TEOS), O3 boro-phos-pho-silicate glass(O3-BPSG), PE-BPSG, and phospho-silicate glass(PSG). All films were polished with KOH-based slurry prior to entering the post-CMP cleaner. The Total X-Ray fluorescence(TXRF) measurements showed that all oxide surfaces are heavily contaminated by potassium and calcium during polishing which is due to a CMP slurry. The polished O3-BPSG films presented higher potassium and calcium contaminations compared to PE-TEOS because of a mobile ions gettering ability of phosphorus. For PSG oxides, the slurry induced mobile ion contamination increased with an increase of phosphorus contents. In addition, the polishing removal rate of PSG oxides had a linear relationship as a function of phosphorus contents.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.38-41
• /
• 2001

In this work, we have been studied the characteristics of each nitride film for the optimization of PMD(pre-metal dielectric) liner nitride process, which can applicable in the recent semiconductor manufacturing process. The deposition conditions of nitride film were splited by PO (protect overcoat) nitride, baseline, low hydrogen, high stress and low hydrogen, respectively. And also we tried to catch hold of correlation between BPSG(boro-phospho silicate glass) deposition and densification. Especially, we used FTIR area method for the analysis of density change of Si-H bonding and Si-NH-Si bonding, which decides the characteristics of nitride film. To judge whether the deposited films were safe or not, we investigated the crack generation of wafer edge after BPSG densification, and the changes of nitride film stress as a function of RF power variation.

• 한국광학회지
• /
• 제16권4호
• /
• pp.340-344
• /
• 2005

화염가수분해 증착법(FHD : Flame Hydrolysis Deposition)으로 제작된 Ge이 첨가된 BPSG(Boro-Phospho-Silicate-Glass)막의 표면을 절단톱(dicing saw)을 이용하여 일정한 깊이로 절단함으로써 각 단위 마이크로렌즈 셀들을 형성시켰다. 또한 절단된 각 단위 마이크로렌즈 셀들을 가열용융(thermal reflow) 방법을 이용하여 $1200^{\circ}C$에서 가열용응시킴으로써 직경이 $53.4{\mu}m$인 마이크로렌즈 어레이를 제작할수 있었다. 이 때 렌즈간 간격은 $70{\mu}m,$ 렌즈 두께는 약 $28.4{\mu}m$이었다. 제작된 마이크로렌즈 어레이의 형상을 이미지-프로세스로 분석하였으며. 초점거리는 $62.2{\mu}m$이었다. 본 제작방법은 일반적인 사진식각 공정을 이용한 마이크로렌즈 제작보다 간단하면서도 저렴한 비용으로 제작이 가능하다. 또한 곡률반경의 조절이 용이하고, 보다 정밀하며 다양한 마이크로렌즈 어레이를 구현할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.171-174
• /
• 2000

We have investigated the CMP slurry properties of silicate oxide thin films surface on CMP cleaning process. The metallic contaminations by CMP slurry were evaluated in four different oxide films, such as plasma enhanced tetra-ethyl-ortho-silicate glass(PE-TEOS), $O_3$ boro-phospho silicate giass( $O_3$-BPSG), PE-BPSG, and phospho-silicate glass(PSG). All films were polished with KOH-based slurry prior to entering the post-CMP cleaner. The Total X-Ray Fluorescence(TXRF) measurements showed that all oxide surfaces are heavily contaminated by potassium and calcium during polishing, which is due to a CMP slurry. The polished $O_3$-BPSG films presented higher potassium and calcium contaminations compared to PE-TEOS because of a mobile ions gettering ability of phosphorus. For PSG oxides, the slurry induced mobile ion contamination increased with an increase of phosphorus contents.

• 한국진공학회지
• /
• 제6권4호
• /
• pp.326-336
• /
• 1997

트랜지스터의 소오스/드레인 접합 특성에 가장 큰 영향을 미치는 인자는 이온 주입 시 발생한 실리콘 내에 발생한 결합이라는 사실에 착안하여, 기존 소오스/드레인 접합 형성 공정과 다른 새로운 방식을 도입하여 이온 주입에 의해 생긴 결함의 제어를 통해 고품질 초 저접합 $p^+$-n접합을 형성하였다. 기존의 $p^+$소오스/드레인 접합 형성 공정은 $^{49}BF_2^+$ 이온 주입 후 층간 절연막들인 TEOS(Tetra-Ethyl-Ortho-Silicate)막과 BPSG(Boro-Phospho-Silicate-Glass)막을 증착 후 BPSG막 평탄화를 위한 furnace annealing 공정으로 진행된다. 본 연구에서는 이러한 기존 공정과는 달리 층간 절연막 증착 전 저온 RTA첨가 방법, $^{49}BF_2^+$와 $^{11}B^+$ 을 혼합하여 이온 주입하는 방법, 그리고 이온 주입 후 잔류 산화막을 제거하고 MTO(Medium temperature CVD oxide)를 증착하는 방법을 제시하 였으며, 각각의 방법은 모두 이온 주입에 의한 실리콘 내 결합 농도를 줄여 기존의 방법보 다 더 우수한 양질의 초 저접합을 형성할 수 있었다.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.517-524
• /
• 1991

The CVD process of BPSG (BoroPhosphoSilicate Glass) and its thin film properties were studied. B2H6, PH3, SiH4 and O2 gases were reacted in a AP (Atmospheric Pressure) CVD system in the temperature range of 300℃ and 460℃. The interaction of B2H6 and PH3 was studied from the deposition rate and dopant incorporation change point of view. The dependency of BPSG step coverage on the temperature was changed with different O2/(B2H6+PH3+SiH4) ratio. Finally, the boundary which distinguishes the stable BPSG's from the ones that react with Di (Deionized) water or cleaning chemicals such as H2SO4, HCl, H2O2, NH4OH etc could be defined.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.779-784
• /
• 2001

In this work, we studied the characteristics of nitride films for the optimization of PMD(pro-metal dielectric) linear process, which can be applied to the recent semiconductor manufacturing process. We split the deposit condition of nitride films into four parts such as PO(protect overcoat) nitride, baseline, low hydrogen and high stress and low hydrogen, respectively. We tried to find out correlation between BPSG deposition and densification. In order to analyze the changes of Si-H and Si-NH-Si bonding density, we used FTIR area method. We also investigated the crack generation on wafer edge after BPSG densification, and the changes of nitride film stress as a function of RF power variation to judge whether the deposited films.