• 한국멀티미디어학회논문지
• /
• 제21권4호
• /
• pp.471-477
• /
• 2018

As an important key technology using on electronic devices, face recognition has become one of the hottest technology recently. The traditional BP Neural network has a strong ability of self-learning, adaptive and powerful non-linear mapping but it also has disadvantages such as slow convergence speed, easy to be traversed in the training process and easy to fall into local minimum points. So we come up with an algorithm based on BP neural network but also combined with the PCA algorithm and other methods such as the elastic gradient descent method which can improve the original network to try to improve the whole recognition efficiency and has the advantages of both PCA algorithm and BP neural network.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.65-73
• /
• 2015

This paper presents a method of predicting the machining parameters on the turning process of low carbon steel using a neural network with back propagation (BP) and particle swarm optimization (PSO). Cutting speed, feed rate, and depth of cut are used as input variables, while surface roughness and electric current consumption are used as output variables. The data from experiments are used to train the neural network that uses BP and PSO to update the weights in the neural network. After training, the neural network model is run using test data, and the results using BP and PSO are compared with each other.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2075-2076
• /
• 2006

In this paper, we propose a new architecture of Genetic Algorithms(GAs)-based Backpropagation(BP). The conventional BP does not guarantee that the BP generated through learning has the optimal network architecture. But the proposed GA-based BP enable the architecture to be a structurally more optimized network, and to be much more flexible and preferable neural network than the conventional BP. The experimental results in BP neural network optimization show that this algorithm can effectively avoid BP network converging to local optimum. It is found by comparison that the improved genetic algorithm can almost avoid the trap of local optimum and effectively improve the convergent speed.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.36-43
• /
• 2019

Turning, a main machining process, is a widespread process in metal cutting industries. Many researchers have investigated the effects of process parameters on the machining process. In the turning process, input variables including cutting speed, feed, and depth of cut are generally used. Surface roughness and electric current consumption are used as output variables in this study. We construct a simulation model for the turning process using a neural network, which predicts the output values based on input values. In the neural network, obtaining the appropriate set of weights, which is called training, is crucial. In general, back propagation (BP) is widely used for training. In this study, techniques such as ant colony optimization (ACO) and particle swarm optimization (PSO) as well as BP were used to obtain the weights in the neural network. Particularly, two combined techniques of ACO_BP and PSO_BP were utilized for training the neural network. Finally, the performances of the two techniques are compared with each other.

• International journal of advanced smart convergence
• /
• 제10권2호
• /
• pp.175-186
• /
• 2021

We have studied the speed regulation of the permanent magnet synchronous motor (PMSM) servo system in this paper. To optimize the PMSM servo system's speed-control performance with disturbances, a non-linear speed-control technique using a back-propagation neural network (BP-NN) algorithm forthe controller design of the PMSM speed loop is introduced. To solve the slow convergence speed and easy to fall into the local minimum problem of BP-NN, we develope an improved BP-NN control algorithm by limiting the range of neural network outputs of the proportional coefficient Kp, integral coefficient Ki of the controller, and add adaptive gain factor β, that is the internal gain correction ratio. Compared with the conventional PI control method, our improved BP-NN control algorithm makes the settling time faster without static error, overshoot or oscillation. Simulation comparisons have been made for our improved BP-NN control method and the conventional PI control method to verify the proposed method's effectiveness.

• 대한전기학회논문지
• /
• 제39권12호
• /
• pp.1306-1316
• /
• 1990

A controller using a multilayer neural network is proposed to the dynamic control of a PUMA 560 robot arm. This controller is developed based on an error back-propagation (BP) neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a commanded feedforward torque generator. A Proportional Derivative (PD) feedback controller is used in parallel with the feedforward neural network to train the system. The neural network was trained by the current state of the manipulator as well as the PD feedback error torque. No a priori knowledge on system dynamics is needed and this information is rather implicitly stored in the interconnection weights of the neural network. In another experiment, the neural network was trained with the current, past and future positions only without any use of velocity sensors. Form this thim window of position values, BP network implicitly filters out the velocity and acceleration components for each joint. Computer simulation demonstrates such powerful characteristics of the neurocontroller as adaptation to changing environments, robustness to sensor noise, and continuous performance improvement with self-learning.

• 융합신호처리학회논문지
• /
• 제10권3호
• /
• pp.164-169
• /
• 2009

본 논문에서는 고해상도 위성영상에 대해서 분할된 후보영역의 텍스처 정보를 기반으로 BP 신경회로망을 이용한 도로영역검출방법을 제안한다. 먼저, N.Otsu가 제안한 히스토그램 기반의 이진화와 열림연산을 수행하여 배경영역으로부터 일차적으로 도로영역인 전경부분을 분할한다. 그리고 전경부분의 색상 히스토그램을 이용하여 주요색상을 추출한 후 ${\pm}25$ 범위 이내에 있는 영역을 도로영역 후보를 검출한다. 마지막으로, 분할된 후보 도로영역에 대해서 동시발생행렬을 이용하여 텍스처 정보를 추출한 후 BP 신경회로망을 이용하여 최종적인 도로영역을 검출한다. 제안한 방법은 도로영역이 일정한 밝기값과 형태를 가진다는 사실에 착안한 것으로, 실험에서 다양한 위성영상들을 대상으로 평균 90% 이상의 검출율을 보여 그 유효함을 보였다.

• Steel and Composite Structures
• /
• 제28권5호
• /
• pp.517-525
• /
• 2018

The specimens made by Z2CND18.12N austenitic stainless steel were conducted on a 100 kN closed loop servo hydraulic tension-compression testing machine with a digital controller. Uniaxial tension and uniaxial ratcheting effect tests were carried out at $25^{\circ}C$. Moreover, Uniaxial tension tests were conducted at $150^{\circ}C$, $250^{\circ}C$ and $350^{\circ}C$. Based on these experimental data, the prediction models of stress-strain curve and the relationship of ratcheting strain and number of cycles were established by the algorithm principle of BP neural network. The results indicated that the predicted results of neural network model were in well agreement with experimental data. It was found that the BP neural network model had high validity and accuracy.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.970-977
• /
• 2014

In this paper, the artificial neural network is used to predict the junction temperature of the IGBT power module, by measuring the temperature sensitive electrical parameters (TSEP) of the module. An experiment circuit is built to measure saturation voltage drop and collector current under different temperature. In order to solve the nonlinear problem of TSEP approach as a junction temperature evaluation method, a Back Propagation (BP) neural network prediction model is established by using the Matlab. With the advantages of non-contact, high sensitivity, and without package open, the proposed method is also potentially promising for on-line junction temperature measurement. The Matlab simulation results show that BP neural network gives a more accuracy results, compared with the method of polynomial fitting.

• Journal of Information Technology Applications and Management
• /
• 제9권2호
• /
• pp.1-16
• /
• 2002

Recently, neural network methods have been studied to find out more valuable information in data bases. But the supervised learning methods of neural networks have an overfitting problem, which leads to errors of target patterns. And the unsupervised learning methods can distort important information in the process of regularizing data. Thus they can't efficiently classify data, To solve the problems, this paper introduces a hybrid neural networks HACAB(Hybrid Algorithm combining a Competition learning model And BP Algorithm) combining a competition learning model and 8P algorithm. HACAB is designed for cases which there is no target patterns. HACAB makes target patterns by adopting a competition learning model and classifies input patterns using the target patterns by BP algorithm. HACAB is evaluated with random input patterns and Iris data In cases of no target patterns, HACAB can classify data more effectively than BP algorithm does.