• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.46-63
• /
• 2012

The concept of an "intelligent building" received significant attention from academic, industry and standard development organizations when technically termed a building management system (BMS). Wireless sensor networks (WSNs) and their recent development enhanced monitoring and control applications for the building's areas. This paper surveys and analyzes advantages of the main current and emerging approaches that may be fit for BMS. Specifically, we discuss challenges including interoperability, integration, overhead, and bandwidth limitation of WSNs in BMS. Based on analyses, we highlight the advantages of an IP-based and RESTful architecture approach as the most suitable solution for BMS using WSNs (BMS-WSN). The paper also describes our future direction and design for BMS-WSN based on these advantages. The purpose is to enable interaction of users with BMS-WSN in the same way as with any website while ensuring energy efficiency. A test-bed implementation and evaluation of a BMS application is also introduced in this paper to demonstrate the feasibility and benefits of IP-based and RESTful architecture for BMS.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.74-83
• /
• 2014

This paper proposes a study on the configuration of balancing of plant(BOP) and implementation of battery management system(BMS) functions for vanadium redox flow battery(VRFB) and propose a method consists of sensor and required design specifications BOP system configuration. And it proposes an method of the functions implementation and control algorithm of the BMS for flow battery. Functions of BMS include temperature control, the charge and discharge control, flow control, level control, state of charge(SOC) estimation and a battery protection through the sensor signal of BOP. Functions of BMS is implemented by the sensor signal, so it is recognized as a very important factor measurement accuracy of the data. Therefore, measuring a mechanical signal(flow rate, temperature, level) through the BOP test model, and the measuring an electrical signal(cell voltage, stack voltage and stack current) through the VRFB charge-discharge system and analyzes the precision of data in this paper. Also it shows a good charge-discharge test results by the SOC estimation algorithm of VRFB. Proposed BOP configuration and BMS functions implementation can be used as a reference indicator for VRFB system design.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.49-55
• /
• 2022

The design of a battery package and a BMS module for applications using seawater rechargeable batteries, which are known as next-generation energy storage devices, is proposed herein. Seawater rechargeable batteries, which are currently in the initial stage of research, comprise primarily components such as anode and cathode materials. Their application is challenging owing to their low charge capacity and limited charge/discharge voltage and current. Therefore, we design a method for packaging multiple cells and a BMS module for the safe charging and discharging of seawater rechargeable batteries. In addition, a prototype seawater rechargeable battery package and BMS module are manufactured, and their performances are verified by evaluating the prevention of overcharge, overdischarge, overcurrent, and short circuit during charging and discharging.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.293-294
• /
• 2015

This paper proposed a design and operation of energy storage system using Zinc-Bromine flow battery. To operate flow battery system with BMS, it uses motor drive system to pump electrolyte. it also needs sensors to check leaking and temperature. The proposed system proves the validity by experiment.

• 한국전자통신학회논문지
• /
• 제19권4호
• /
• pp.669-676
• /
• 2024

본 논문은 리튬이온 배터리의 화재 시험을 통해 배터리 손상 및 열 전달 메커니즘을 평가하고, 배터리 관리 시스템(BMS)의 효율성과 안전성을 향상시키기 위한 방안을 모색한다. 각 섹터의 온도 변화는 T1, T2, T3 지점에서 측정하며, 발화 전극에 전기 투입 후 10분 동안 주변 셀들의 반응을 관찰하고 기록한다. 시험 결과, A 섹터와 B 섹터의 배터리는 완전 발화하여 심각한 물리적 손상을 입고, C 섹터의 배터리는 발화되지 않고 큰 손상을 입지 않는다. 이를 통해 섹터 간 간격이 발화 및 열 전파를 저감하는 데 중요한 역할을 한다는 것을 확인한다. 본 논문은 리튬이온 배터리의 열 관리 시스템 설계 시 섹터 간 간격을 고려하여 발화 및 열 전파를 저감할 수 있는 중요한 설계 요소임을 시사하며, 향후 다양한 배터리 모델과 조건을 통해 추가적인 시험을 수행하여 BMS의 효율성과 안전성을 더욱 향상시킬 방안을 제안한다.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.10-17
• /
• 2016

The purpose of this paper is to deduct components that are in the group of highest risk(top 10%). the group is conducted for classification into groups by values according to risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet. Top 10% of failure mode among total potential failure modes(72 failure modes) of ESS included 5 BMS(battery included) failure modes, 1 invert failure mode, and 1 cable connectors failure mode in which BMS was highest. This is because ESS is connected to module, try, and lack in the battery part as an assembly of electronic information communication and is managed. BMS is mainly composed of the battery module and communication module. There is a junction box and numerous connectors that connect these two in which failure occurs most in the connector part and module itself. Finally, this paper proposes RPN by each step from the starting step of ESS design to installation and operation. Blackouts and electrical disasters can be prevented beforehand by managing and removing the deducted risk factors in prior.

• 유통과학연구
• /
• 제17권4호
• /
• pp.27-32
• /
• 2019

Purpose - The business model is a method of creating corporate value, in existing "classification of business model", limitations and redundancy phenomena are applied when a new type flows in, and as consumer's purchasing decision of consumer behavior 5 steps. The classification schemes can be used for more accurate data analysis by proposing a new mapping technique in the fourth industry. Research design, data, and methodology - It was far more classified on the business model (BMS by BDS), and so on. Designing the new horizons of logistics, marketing, methodology by reclassifying these existing data to new useful data with the old methods, in order to analyze the areas where the problem has been raised for the point that the existing methods are not suitable configured. This will be applicable to the system of quaternary industry from the perspective of the buyer. Results - The mapping results of the consumer purchase decision were as follows,the 1^st stage (interest) was 23.73%, 2^nd stages (publicity) 33.90%, 3^rd stages (sales) 13.56%, 4^th stages (decision) 11.86%, 5^th stages (repurchaser) 16.95%. This verified that "the business model can be classified through "BMS by BDS". Conclusions - This structural classification is the basis of logistics marketing in the 4th industry, and proposes a innovative and effective model of constructing theory.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.15-16
• /
• 2014

This paper proposed a construction of BMS to adopt energy storage system using flow battery. To operate flow battery system with BMS, there are motor drive system to pump electrolyte up. And it needs sensors to check leaking and temperature. The proposed system is verified by experiment.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.210-217
• /
• 2010

This paper introduces a lithium ion battery management system (BMS) for the STSAT-3 satellite. The specifications of a lithium ion battery unit are proposed to supply power to the satellite and the overall electrical and mechanical designs for a lithium ion battery management system are presented. The structural simulation results will be shown to confirm the behavior of both the BMS and the cells.

• 한국항공우주학회지
• /
• 제37권11호
• /
• pp.1157-1163
• /
• 2009

본 논문은 과학기술위성3호 리튬이온 배터리의 배터리 운용 시스템에 대해 소개한다. 위성에 전력을 공급하기위한 리튬이온 배터리의 요구조건과 리튬 이온 배터리의 운용 시스템의 전반적인 디자인 방법들을 설명하였다. 더 나아가 이러한 설계 내용들을 검증하기 위하여 검증 모델을 제작하여 기능 테스트들을 수행하였고 이러한 결과 들을 통해서 BMS와 사용된 리튬이온 cell의 성능을 확인하였다.