• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.81-92
• /
• 1998

Lately public interest in tree saps of maple and birch trees has been increased for sap drink as a natural medical beverage. To ensure tree sap drink for commercial production, species which are available in resources, their ecological regeneration characteristics in the natural forest stand, and tree sap resources should be investigated. Species for the collecting tree saps and their distribution were surveyed in the areas of Mt.Sobaek, Tanyang-gun, Chungcheongbuk-do. Mt.Sobaek area was selected to the proper place to survey as the feasible area for tapping tree saps for the natural beverage. Feasible tree species of this area are Betula costata, Betula schmidtii, Comus controversa, Acer mono, and Acer pseudosieboldianum based on the estimated tree sap amounts. Average and maximum species diversities of surveyed area were 4.2 and 5.39, respectively. Its evenness 0.78 referred that there are actively progressing ecological regeneration among diverse tree species. Tree saps are mainly harvested at the areas of upper and lower Wonmanteo. In terms of species, the most high sap amounts were from birch sap, next Comus controversa, the 3rd Acer mono. Many measures were suggested ecologically and technically, for commercial or practical production of tree sap drinks, though Mt.Sobaek area was evaluated as improper place because of geographical and transportational limitation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.143-148
• /
• 2012

This study evaluated the quality characteristics of white birch (Betula platyphylla var. japonica) sap with different collection times. The changes of browning index, turbidity, pH, total acidity, organic acid, free sugar, crude protein, crude ash, and mineral content were investigated. The browning index and turbidity increased from 0.076 to 0.222 and from 0.048 to 0.138, respectively, with increasing collection time. The pH decreased from 6.09 to 4.72, while total acidity increased with increasing collection time. Citric and malic acids were detected and malic acid increased with increasing collection time. Glucose and fructose as free sugars were detected and their contents were 0.364~0.433% and 0.497~0.664%, respectively. Crude protein and crude ash contents remarkably increased from 3.40 to 32.37 mg% and from 0.01% to 0.04%, respectively, with increasing collection time. Cu, Fe, Ca, Mg, Mn, and K were detected, and increased with increasing collection time. Particularly, K increased remarkably from 5.25 to 37.27 mg/L over time. These results indicate that the optimum processing method to improve the quality of white birch sap is necessary, because the quality of sap decreased as collection time increased, but nutritional value increased.

• Landscaping Tree
• /
• s.114
• /
• pp.30-35
• /
• 2010

자작나무는 수피를 태울 때 '자작자작'거리는 소리가 난다고 하여 붙여진 예쁜 이름이다. 또한 결혼을 뜻하는 '화촉'이란 단어도 자작나무를 일�Z는 '화(樺)에서 유래되었는데, 이는 오래 전부터 우리 조상들이 자작나무 껍질의 기름성분을 이용하여 신혼 방에 등불을 만들어 방안을 훤히 밝힌 데서 찾아볼 수 있다. 동양에서는 눈처럼 하얀 껍질과 시원스레 뻗은 키로 인해 '미인나무'로 통하는가 하면, Birch라고 불리는 서양에서는 숲 속의 여왕으로 대접받을 정도로 사랑받는 나무이다.

• Landscaping Tree
• /
• s.113
• /
• pp.20-24
• /
• 2009

자작나무 수피를 태울 때 '자작자작'거리는 소리가 난다고하여 붙여진 예쁜 이름이다. 또한 결혼을 뜻하는 '화촉'이란 단어도 자작나무를 일컫는 '화(樺)'에서 유래되었는데, 이는 오래 전부터 우리 조상들이 자작나무 껍질의 기름성분을 이용하여 신혼 방에 등불을 만들어 방안을 환히 밝힌 데서 찾아볼 수 있다. 동양에서는 눈처럼 하얀 껍질과 시원스레 뻗은 키로 인해 '미인나무'로 통하는가 하면, Birch라고 불리는 서양에서는 숲 속의 여왕으로 대접 받을 정도로 사랑받는 나무이다.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.424-424
• /
• 2010

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.22-29
• /
• 2002

This research was conducted to investigate the morphological characteristics of fine fibers produced during beating process of high yield pulp treated with ozone and the distribution of lignin in the produced fine fibers. Thermomechanical(TMP) pulp and chemithermomechanical(CTMP) pulp of spruce and CTMP of white birch were beaten to reach 200$m\ell$ CSF, and then the fine fibers were observed using ultraviolet microscope. The fine fibers produced from TMP and CTMP of spruce using treated with ozone for 15 minutes were fragments of fiber surfaces or cell corners, and most of them contained lignin. However, lignin was not observed in the fibers after 15 minutes of ozone treatment. The fine fibers produced from CTMP of white birch were broken pieces or fragments of fiber surfaces or cell corners. The lignin was observed in the fibers until 5min of ozone treatment but no lignin was observed after 5 minutes of ozone treatment. Different morphological characteristics of TMP and CTMP explained both the different morphological characteristics and the distribution of lignin observed in the fine fibers produced from the beating process of TMP and CTMP treated with ozone.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.101-107
• /
• 2010

Heat treatment was performed to improve sound absorption properties for four tree species; Tulip tree, Korean Paulownia, Red pine and Costata birch, at temperature of $175^{\circ}C$ and $200^{\circ}C$under vacuum condition. Sound absorption properties of two kinds of boards, which were in radial and tangential sections, were measured under a frequency range of 100 to 3200 Hz by the two microphone transfer function method. It was found that sound absorption properties were increased by heat treatment and the efficiency was higher at $200^{\circ}C$ than that at $175^{\circ}C$. Even Costata birch had a little effect on low temperature of $175^{\circ}C$, $200^{\circ}C$ heat treatment for sound absorption property, the efficiencies of sound absorption were 14, 19%, respectively. The efficiencies of sound absorption ranged 22 to 120% for heat-treated Tulip tree, Korean Paulownia.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.75-80
• /
• 1997

This research has been examined to measure the degree of the fiber damage of ozonenation high yield pulp in the beating process. Ozone treated the TMP(Thermomechanical Pulp) and CTMP(Chemithermomechanical Pulp) of spruce and the CTMP of birch has been beaten to be reached 200ml(freeness) of its content. It had been studied the forming of fiber distribution by treatment for long fiber, short fiber, fine with the above method. As ozone treatment time gets longer, the pulp has showed the tendency of increasing the fiber content of 28, 48mesh. Ozone treated fiber has been increased long fiber content by being added softness. By given longer ozone treatment time, the TMP and CTMP of spruce has showed the decreasing of fiber content. On the contrary, CTMP of birch has showed the increasing its fiber content. It had proved that the results of difference are rather closer to the species of tree than closer to the kinds of pulp. The fiber content of over 200mesh which has created in beating process demonstrates the decreasing of its fiber content by getting longer ozone treatment time. The softness of fiber can be extracted by the lignin of fiber surface that had been formed by ozone treatment. Thus we assume that the fiber in the process of beating obtains less physical damage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2821-2830
• /
• 2014

This study was carried out to define gazelle industry through preceded research for gazelle firm & gazelle region, in order to discover high-growth industries. Gazelle industry is 'employees per company is more than ten people, and over the past five years, within top 10% by Birch employment growth index'. According to the definition of gazelle industry, Chungnam gazelle 105 industries were chosen. Then, analyzed whether Chungnam gazelle industries has competitiveness compared with nation and each city of Chungnam. In addition, typology to industrial development stage was devised by developing of business scale quotient(BQ) and industrial growth rate(IG). And development strategies of Chungnam gazelle industries was proposed case by industrial development stage.